Reviews Heat Resistant Alloys
Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit
- Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
- Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
- Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
- Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
- Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check StockForney 20464 Drill Bit HSS 135-Degree Split Point Screw Machine Length Stubby, 11/32-Inch, Black
- 135-degree split point for improved wear resistance.
- Use in machine drilling and in portable drilling equipment.
- Steel metal alloys, heat resistant stainless and titanium.
- Stubby length provides for easy penetration.
Check Stock3M Cubitron II Roloc Fibre Disc 987C, 86891, TR, 2 in, Multi Pack
- 3M Precision Shaped Grain (PSG) maintains super-sharp points that cut exceptionally fast with less pressure.
- PSG runs cooler, reducing metal discoloration/oxidation and the chance of heat related stress cracks.
- Disc life is significantly longer, completing more parts per disc and requiring fewer disc changes.
- Grinding aid reduces grinding temperatures for processes involving heat-sensitive alloys such as stainless steel, nickel alloys and titanium.
- 3M Roloc attachment system provides for easy disc changes between grades or applications.
- Stiff fiber backing and a strong resin bond provide durability and tear-resistance for heavyweight applications such as high-pressure weld grinding.
Check StockCeramic Crucible Bowl Dish Premium Italian Cup Furnace Melting Casting Refining Gold Silver (200g)
- Premium Italian Crucible Crafted for Melting Gold, Silver, Copper, Brass and Other Alloys. Can Sustain High Temperature Over 2800 Degrees..
- FEATURES: High Purity, Corrosion Resistance, High Strength, High Heat Resistant, High Shock Resistance, Improved Design for Torch Applications...
- Crucibles Should be Glazed with Borax Prior to Use..
- Dimensions: 54mm Dia. 21mm (2.1" Dia.x 0.82")..
Check StockAccusize Industrial Tools 3'' by 1'' 90 Deg. Square Shoulder Indexable Face Mill with 17 Pcs Apkt1604 Inserts, 4508-0018b+0056-1604
- All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
Check StockPowell-Peralta Ripper Complete Skateboard 7.0 Orange
- Powell-Peralta skateboards are made from strong, light, hard yellow birch, fused together with water-resistant glue in proprietary Powell-Peralta....
- Professional quality silicon carbide grit griptape optimizes grip and durability in all weather conditions.
- Mini Logo trucks combine strength, stability, and smooth turning by utilizing premium alloys, high-rebound bushings, and heat-treated axles.....
- Powell-Peralta wheels are fast, durable, hot cast, polyurethane wheels that roll, slide and grip great. Medium 90-A hardness for size 7" - 7.625" wide....
- Mini Logo bearings are Skate Rated so they roll fast, and stand up to the dirt, dust, impacts and moisture skateboards have to roll through every day.
Check Stock3M Cubitron II Fibre Disc 987C, 36+, 4-1/2 in x 7/8 in, Die 450E
- 3M Precision-Shaped Grain maintains super-sharp points that cut exceptionally fast with less pressure.
- Mineral runs cooler and disc life is significantly longer, completing more parts per disc and requiring fewer disc changes.
- Reduces changeouts and downtime in robotic and pressure-assisted applications.
- Stiff fiber backing and a strong resin bond provide durability and tear-resistance for heavyweight applications such as high-pressure weld grinding or beveling.
- Grinding aid incorporated on the disc minimizes grinding temperatures for heat-sensitive alloys.
- 3M Precision Shaped Grain (PSG) maintains super-sharp points that cut exceptionally fast with less pressure.
- PSG runs cooler and disc life is significantly longer, completing more parts per disc and requiring fewer disc changes.
Check StockTIG Welding Tungsten Electrodes 2% Lanthanated Blue WL20 10-Pack 1/16
- PERFECT for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and stainless steel.
Check StockBenchmark Abrasives 2\ Ceramic Quick Change Sanding Discs with a Male R-Type Backing Pad 60 Grit - 25 Pack
- QUANTITY: This is a packge of 25 Ceramic Quick Change Discs..
- DIMENSIONS: 2" Diameter with a Male R-Type backing pad..
- APPLICATIONS: Ceramic Quick Change Discs prodive the best cut rate to cost ratio. They are well-suited for grinding, deburring and finishing..
- USE: Our quick lock discs are made for use on a die grinder and should only be used with the proper size mandrel. 2" discs should be used with a 2 inch mandrel..
- INFO: Ceramic grains run cooler than aluminum oxide and zirconia grains. Ceramics are the number one choice for work on heat sensitive alloys such as stainless steel, nickel alloys and titanium..
Check StockSupercut 93-inch X 3/4-inch X .032-inch, 18 TPI Carbon Tool Steel Bandsaw Blade (USA Made) for Cutting Mild Steel, Wood, and Other Materials
- 100% MADE IN THE USA - Not made anywhere else but the USA..
- 100% LIMITED LIFETIME WELD WARRANTY - Fatigue resistant premium carbon tool steel blade is built with the toughest alloys fused by our superior weld..
- INTRICATE CUTS - Heavy duty and heat-treated raker tooth design that can withstand sharp flexing and high speeds..
- VERSATILE – Cut all types of mild steel, wood and non-ferrous metals (copper, brass, aluminum)..
Check StockAccusize Industrial Tools 4 Pc 90 Deg Indexable End Mill Set with Apkt11t3 Inserts, Cutter Diameter Includes 1/2'', 5/8'', 3/4'' and 1'', 0028-8416
- 90Degree Cutting angle Nickel Plated. Screw down insert.
- All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
- Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
- with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
- Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check StockF&D Tool Company 11091-A7382 Staggered Tooth Side Milling Cutter, High Speed Steel, 3.75\ Diameter, 1/2\ Width of Face, 1.25\ Hole Size
- 90Degree Cutting angle Nickel Plated. Screw down insert.
- All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
- Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
- with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
- Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check StockMARSWARE TIG Welding Tungsten Electrode 10-Pack Rod Rare Earth Blend Tri-Element Non-Radioactive 0.040 ×7 Ground Finish Arc Starts Easier and More Stable Purple EWG
- 【Premium Quality Tungsten Electrodes】The tig welding tungsten electrodes rod is perfect for tig welding. Durable. Good conductivity. Arc starts easier and more stable. Hardness ensured..
- 【High temperature-resistant, Non-melting】98% Tungsten, 1.0% Lanthanum, 0.5% Zirconium, and 0.5% Yttrium, non-radioactive. Annealed brittled for easier sizing. Melting point can reach 3,410 degrees Celsius. Conform to ANSI/AWS A5.12M/A5.12:2009 ISO 6848:2004 MOD..
- 【A Wide Range of Suitable Base Metal Type】Good for stainless steel, copper alloys, carbon steel, nickel titanium, copper alloys, magnesium, aluminum and its alloys, etc..
- 【Upgraded Vacuum Package】10 pcs 0.04''(1.0mm)×7''(175mm) ground finish tungsten electrodes. Anti-oxidation vacuum packaging. Ensure product quality and longer preservation time..
- 【Worry-free Purchase】Selling directly from MARSWARE factory. Returnable within 30 days of receipt of shipment. Experienced and professional customer service team to help you solve any issue..
Check Stock