Reviews Heat Conductive Tube

2pcs, Copper Metal Round Tube, 99.9% High Purity Copper Tube, Good Thermal Conductivity/Ductility, 500mm Long, 1mm Wall Thickness,Outer Diameter 14mm Inner Diameter 12mm

  • Available in 3 different outer diameters: 12mm, 14mm, 15mm, wall thickness: 1mm, length: 500mm..
  • 99.9% copper tube, T2 copper metal tube, high purity, fine structure, low oxygen content and high strength..
  • Second only to silver in electrical conductivity and thermal conductivity, it is widely used in the manufacture of thermally conductive and thermally conductive devices..
  • Good heat resistance, ductility, corrosion resistance, weather resistance and processability. Easy to solder and solder. The surface is smooth and seamless..
  • Applications: DIY projects, handicrafts, architectural models, architectural decoration, industry, garden products, wires, heat conduction, etc..
Check Stock

Thermal Adhesive Tape 20mm by 25M, HPFIX High Performance Thermally Conductive Tape Apply for Coolers, Heat Sink, LED Strips, Computer CPU, GPU, Easy to Apply & High Durability

  • ???? HPFIX thermal adhesive Tape is a simple and practical heat conductive tape, very easy to use, even for beginners..
  • ???? Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better..
  • ???? HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands..
  • ???? Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power..
  • ???? Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C )..
Check Stock

Hotop 150 Pieces Solder Seal Wire Connector Heat Shrink Butt Waterproof Insulated Electrical Splice Terminals Automotive Marine for Boat Trailer (Red,22-18 AWG)

  • What will get: the package comes with 150 pieces of 22-18 AWG red heat shrink butt connectors with heat shrinkable, waterproof and conductive properties, which are sufficient to meet your various needs.
  • Insulated and waterproof: the electrical wire terminal comes with outer polyolefin tube and inner hot-melt ring, which can effectively improve waterproof performance, so it is very suitable for the automotive and marine industries.
  • Easy to use: you can just put 2 stripped wires into the solder sleeve and heat it with a hot air gun, and the insulating tube will shrink with a shrinkage ratio of 2:1 to form a waterproof seal, so as to complete the connection.
  • Practical design: these solder seal wire connectors are different from ordinary heat-shrinkable tubes, designed with solder ring and do not need crimping.
  • The solder seal terminals are transparent and can be accurately inspected when the wires are stripped and inserted inside.
  • Scope of usage: the insulated butt splices are useful tools to provide protection for wires, which are often applied in automobile, ship, marine, motorcycle and vehicles, and also applied for scientific wiring projects.
Check Stock

Thermal Adhesive Tape (40mmx10 Meters 0.3mm Thickness) Double Side Adhesive Thermal Conductive Tape for Heat Sink of LED Light,PC and More, Electrically Insulated,1 Reel Pack

  • Thermally conductive adhesive tape is made of advanced thermal conductive PSA. They satisfy the demand of high adhesion and excellent thermal conductive efficiency by providing a preferential heat-transfer path between heat-generating components and heat sink or other cooling devices..
  • High tacky thermal conductive PSA. Only pressure is needed to form an excellent bond and thermal interface, effectively replace the grease and mechanical fixation..
  • The performance of thermal conductivity, insulation, buffer and high tacky make it as the best choice for electronic application..
  • Flexible and conformable. Ideal for uneven surfaces..
  • Widely used in: Assembly of LED light bar module and metal frame bezel. Assembly of DDR-RAM module and heat sink. Electronic components - IC, COP, CPU, MOS, etc. M/B, PS, PCB, LCD, PDP, PC, etc..
Check Stock

Ceramic Tweezers, Stainless Steel Ceramic Tweezers, Non-Conductive, High Temperature Resistance 3000 Degrees Applicable to Precision Electrical Operation (Silver)

  • CERAMIC TIP SHAPE: Ceramic tips are smooth,solid and anti-magnetic,ideal choice for precise electrical operation.Are one of the most needed tools for any DIY.
  • CERAMIC TWEEZERS have Solid and durable quality with long-life.Made by non-conductive & heat resistant ceramic tips and stainless steel handle..
  • TWEEZERS LIFE: durable , can work for a long time with few cracks.Non-Conductive & Heat Resistant so it will not short your coil while firing..
  • QUALITY MATERIALS: Precision-made for those precise adjustments to your coil while firing. Non-Conductive & Heat Resistant so it WILL NOT short your coil while firing.WIDE APPLICATION: acidity situation,soldering point,accurate mechanics,drug operation,clean room.Applicable to Precision Electrical Operation.Material: 304 Stainless Steel + Ceramic Size: 5.12 in. Weight：0.5 oz..
Check Stock

Stainless Steel Tweezers,Stainless Steel Ceramic Tweezers, Antimagnetic, High Temperature Resistant, Non-Conductive, High Temperature Resistance 3000 Degrees (Stainless Steel Ceramic Tweezers)

  • CERAMIC TIP SHAPE: Ceramic tips are smooth,solid and anti-magnetic,ideal choice for precise electrical operation.Are one of the most needed tools for any DIY..
  • CERAMIC TWEEZERS have Solid and durable quality with long-life.Made by non-conductive & heat resistant ceramic tips and Carbon Fibre handle..
  • TWEEZERS LIFE: durable , can work for a long time with few cracks.Non-Conductive & Heat Resistant so it will not short your coil while firing..
  • QUALITY MATERIALS: Precision-made for those precise adjustments to your coil while firing. Non-Conductive & Heat Resistant so it WILL NOT short your coil while firing..
  • TWEEZERS QUALITY: Ceramic Tips are Pointed for Precision yet Flat at the very end for easier pinching of the coils.high quality stainless steel handle, anti-rust, acid and alkali resistant, anti-magnetic. WIDE APPLICATION: acidity situation,soldering point,accurate mechanics,drug operation,clean room.Applicable to Precision Electrical Operation.Material: Carbon Fiber + Ceramic. Size: 5.12 in. Weight：0.5 once..
Check Stock

Ceramic Tweezers, Carbon Fiber Ceramic Tweezers, Non-Conductive, High Temperature Resistance 3000 Degrees Applicable to Precision Electrical Operation (Black carbon fiber handle)

  • CERAMIC TIP SHAPE: Ceramic tips are smooth,solid and anti-magnetic,ideal choice for precise electrical operation.Are one of the most needed tools for any DIY..
  • CERAMIC TWEEZERS have Solid and durable quality with long-life.Made by non-conductive & heat resistant ceramic tips and Carbon Fibre handle..
  • TWEEZERS LIFE: durable , can work for a long time with few cracks.Non-Conductive & Heat Resistant so it will not short your coil while firing..
  • QUALITY MATERIALS: Precision-made for those precise adjustments to your coil while firing. Non-Conductive & Heat Resistant so it WILL NOT short your coil while firing..
  • TWEEZERS QUALITY: Ceramic Tips are Pointed for Precision yet Flat at the very end for easier pinching of the coils.high quality stainless steel handle, anti-rust, acid and alkali resistant, anti-magnetic. WIDE APPLICATION: acidity situation,soldering point,accurate mechanics,drug operation,clean room.Applicable to Precision Electrical Operation.Material: Carbon Fiber + Ceramic. Size: 5.12 in. Weight：0.5 oz..
Check Stock

OdontoMed2011 New O.R Grade YANKAUER Pediatric Suction Tube INTSTRUMENT ODM

  • NON-CONDUCTIVE SUCTION TUBING: Provides easy handling and drapability with low coil memory. It also has thick tubing walls that offer safety and collapse-resistance at high vacuum pressures..
  • MAXI-GRIP CONNECTORS: Tubing is equipped with female patented connectors to accommodate a wide range of surgical instruments and equipment with a secure fit..
  • RIGID MALE CONNECTOR: In addition to the Maxi-Grip Connector, every sterile tube includes a rigid male connector for coupling additional tubes..
  • ECONOMICAL AND NON-STERILE: A cost-effective solution with the quality and reliability you need to remove fluids from the surgical field..
  • PRODUCT QUANTITY: The Cardinal Health Medi-Vac Non-Conductive Suction Tubing comes in a case of 50..
Check Stock

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

  • ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
  • ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
  • ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
  • ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
  • ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Check Stock

Wontolf H1 LED Headlight Bulbs 130W 20000LM 700% Brighter H1 LED High Beam Low Beam 6500K Cool White CSP Chips Conversion Kit IP68 Waterproof

  • 【700% Brighter】: H1 LED headlight bulb, used High Power upgraded Top CSP LED Chips,with 130W 20000 lumens 6500k per pair, which is 7 Times brighter than the original halogen lamp..
  • 【Excellent Heat Dissipation】: LED h1 headlight using whole aviation aluminum housing, thermally conductive copper plate and gas-liquid circulation superconducting copper tube and 14000 rpm high-speed silent turbo fan to improve maximum heat dissipation.Excellent heat dissipation and IP68 waterproof performance makes h1 LED bulb lifespan more than 60,000 hours..
  • 【Anti-radio Interference】: The driver is built-in EMC system, Used shield power cable to eliminate the possibility of radio interference, IP68 waterproof rate ensure it works well even in bad weather,like rainy, snowy, haze days..
  • 【Super Uniform Beam Pattern】: The illumination center point of the LED chips are consistent with the halogen lamp, without astigmatism, providing wider and farther 6 times illumination range and perfect beam pattern.No dark spots or uneven beam pattern, no glare to other drivers..
  • 【10-Min Quick Installation】: Almost an identical design to the original halogen bulbs really realizes 100% plug and play. No tools and any modification required. These bulbs are CanBUS Ready and o....
Check Stock

Silver Conductive Epoxy Adhesive, 1.0ML Electrically Conductive Adhesives for Repair Conduction Paint Connectors Board Paste Wire

  • Easy to use -- The pure silver powder medium of conductive silver paint has excellent electrical conductivity and moisture resistance and dryness..
  • Strong adhesion -- The silver glue has excellent adhesion and covering power on various materials such as PC, PET, PVC, PU and other films, resin plates, coated paper, glass, copper sheets, aluminum plates, etc..
  • Features -- The conductive adhesive silver glue has the feature of strong adaptability, stable conductivity, single component, low temperature curing, excellent adhesion and extremely low square resistance..
  • High‑purity silver -- This conductive silver paint is a high‑purity silver, low resistance, fast‑drying product, with controllable conductivity, low‑temperature curing and has a good electromagnetic wave shielding effect..
  • Application -- The conductive adhesive silver glue is widely used in home supplies, electrical items, CPU in computer, LED display, LCD display, optical fiber communication equipment, controller, heat sink and led etc..
Check Stock

AVNTKER Double Sided Thermal Tape 1-inch/25mm Super Strong Adhesive Non Conductive Heatsink Sticky Tape for CPU, GPU, SSD Drive, HDD, VGA, PCB, LED Strips, 3D Printer, Raspberry Pi Radiator

  • Material: Double sided thermal tape is made of a mixture of acrylic polymer, thermal conductive ceramic powder and silicone adhesive, full roll size 20m x 25mm x 0.25mm (Length:66 feet x Width:1-inch).
  • Excellent Performance: Thermally conductive sticky tape has super stickiness and can firmly fix the heatsinks to the heating element, effectively improving the heat transfer between electronic components. (substitute screws, rivets, welds, fastener and liquid glue).
  • High Durability: Thermal duct tape has extremely stable performance, durable adhesion on both sides, no residual glue, and can work for a minimum of 5 years in high temperature environment of 80-155°C. ( If combined with heat conduction paste or cooling silica gel pad, the effect will be better ).
  • Security Application: The heat dissipation tape is insulative and non-conductive, which eliminates any risks of causing short circuit, adding more protection to the CPU, GPU, VGA cards, HDD, SSD drive, VRAM, M2 hard disk, Water cooling kit, Laptop, PCB, IGBT, Mos tubes, Diode, Triode, Circuit board, Logic board, Raspberry pi, LED cooler, 3D printer.
  • Widely Applications: Heavy duty two sided stick tape can be used for attach aluminum/copper heat sinks to heating element, fixed the carpet to prevent sl....
Check Stock

Thermal Pad,100x100x1.5mm 6W/mk Thermal Conductivity,with Good efficient Heat Dissipation Performance,for Laptop Heatsink/CPU/GPU/SSD/IC/LED Cooler

  • ✔Good Heat Dissipation：Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between....
  • ✔Application：Thermal Pad used in the control board of electronic and electrical products.
  • Pads and foot pads inside and outside the motor.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature....
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be....
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is....
Check Stock