Reviews Headers For 3 Vortec

Remflex 2049 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Reflex's unique flexible graphite material has been proven for more than 30 years.
  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6 /6.0L- LS1, LS2 Vortec, 1-3/4" Round Port, For Headers, 2/Set.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

LSX Header Bolts for LS1 LQ4 LQ9 LS9 4.8 5.3 6.0 6.2L Grade 10.9 Silverado Tahoe (Iron)

  • These bolts are made with hardened Grade 10.9 steel, and can withstand a minimum tensile strength of 150,000PSI..
  • Flange Bolts are identified by the built-in washer under the head that acts to distribute the clamping load over a greater area..
  • They are designed to provide the same holding power as if you were to use a washer..
  • These bolts are superior to original or OEM product, and are made to withstand high strength and extreme conditions, generally found in Motorsports!.
  • Fits: LS1, LS2, LS3, LS6, LS7, LS9, GM Vortec 4.8 5.3 6.0 6.2L with OEM Exhaust Manifolds & Aftermarket Headers..
Check Stock

Z Whip Stainless Steel LS Header Exhaust Manifold Bolt Kit. Compatible with all GM Chevy LS Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L Hardened SS 304 (18-8) Bolts

  • Set of 12 Hardened 304 (18-8) Stainless Steel Bolts. These will not Rust or Corrode..
  • Compatible with all LS Series Engines 1997-2014 LS1, LS2, LS3, LS6, LS7, LS9, GM Vortec 4.8L 5.3L 6.0L 6.2L with OEM Exhaust Manifolds & Aftermarket Headers. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines.
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.
  • Meets or Exceeds Industry Standard ASME / ANSI Specifications.
Check Stock

A-Team Performance - Distributor Black Cap EFI VORTEC 1996-2002 and Red Spark Plug Wires Set 2 in 1 Kit - Compatible with Chevy GM Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500

  • Distributor Black Cap EFI VORTEC 1996-2002 and Red Spark Plug Wires Set 2 in 1 Kit.
  • Compatible with Chevy GM Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500.
  • EFI Vortec 1996-2002 Distributor - Direct EFI distributor replacement for stock units with improved features such as Zinc-coated steel hold down clamp for a secured fit.
  • Specifications - Magnetic Pick-Up Trigger, Computer-Controlled Advance Type, Crab-Style Female Cap, and 6 Cylinders. Spark Plug Wire - with Black Straight Boot for Crab Style Vortec Distributor, Black 90 Degree Boot for Spark Plug.
  • Long-lasting Service - Low-resistance heat conductor that can withstand wear and tear and last for years. Warranty and Compatibility - Spark Plug Wire is compatible with GMC Chevy GMC Truck SUV Vortec 5.0L 5.7L 5700 350 1996-2003 and comes with a one-year warranty.
Check Stock

A-Team Performance - Complete Distributor - Compatible with Chevy GM EFI VORTEC 1996-2002 Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500 Black Cap

  • EFI Vortec 1996-2002 Complete Distributor replacement for stock units with improved features such as Zinc-coated steel hold down clamp for a secured fit.
  • Compatible With Chevy / GM 5.0 L / 305 in3 commonly referred to as Vortec 50005 and .7 L / 350 in3 commonly referred to as Vortec 5700.
  • CNC-Machined — High-quality EFI distributor with CNC-machined aluminum housing, steel internal, and chromoly steel gear material construction.
  • Specification - Magnetic Pick-Up Trigger, Computer-Controlled Advance Type, Crab-Style Female Cap, and 6 Cylinders.
  • Direct replacements for stock units, but with improvements throughout.
Check Stock

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Michigan Motorsports Valve Seals

  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Michigan Motorsports Valve Seals.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and Michigan Motorsports Valve Seals.
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available..
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage..
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111.
Check Stock

Moroso 73220 Spark Plug Wire Set, Universal

  • Designed for routing wires under headers on old and new style Small Block Chevy engines  Includes four chrome plated brackets, two 4-hole looms, two 2-hole looms, two 4-hole separators, two 3-hole separators, two 2-hole separators and mounting bolts.
  • Designed for routing wires under headers on old and new style Small Block Chevy engines.
  • Includes four chrome plated brackets, two 4-hole looms, two 2-hole looms, two 4-hole separators, two 3-hole separators, two 2-hole separators and mounting bolts.
  • Package Dimension: 7.0 " L x 5.0 " W x 2.0 " H.
Check Stock

Supermicro Motherboard Micro ATX DDR4 C7Z170-M-O

  • 64GB Unbuffer Non-ECC UDIMM, DDR4-3200MHz (OC), in 4 DIMM slots.
  • 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x4, 1 PCI-E 3.0 x1.
  • Intel Z170 Express controller for 6 SATA3 (6 Gbps) ports.
  • RAID 0,1,5,10 + 1 PCIe M.2(PCIe x4, 2260/2280/22110)(No Raid Support).
  • Single LAN with Intel single Ethernet PHY i219V.
  • Intel 6th Generation Core i3 series/Core i5 series/ Core i7 series, Socket H4 (LGA 1151) supported.
  • 6 USB 3.0 ports (4 rear + 2 via header), 4 USB 2.0 ports (2 rear + 2 via headers),2 USB 3.1 (10 Gb/s) ports(Headers).
Check Stock

Flowmaster 615105 05-19, Mopar Cars, 5.7L, 6.1L, Performance Ait Intake

  • Exhaust Headers(11-17 Dodge Hemi 57L Shorty Tuned Length - 1-3/4in Chrome).
  • As always BBK Performance exhaust headers are CNC mandrel bent for maximum performance right out of the box.
Check Stock

SBC Vehicle to LS Engine Swap Mount 1973-1987 Square Body 1988-1998 OBS Chevy C10 C/K Full Size Truck Steel Adjustable Motor Conversion Bracket Adapter Plate Clamshell 1500 2WD Small Block

  • Z Whip Adjustable LS Swap Engine Mounts Allow you to swap an LS engine into a 1973 to 1998 GM Chassis that originally had a Small Block Engine that used the Clamshell Style engine mounts. These have ½” Rearward and 2-1/2” Forward Adjustability to help clear Heater Boxes, Brake Boosters, Headers, Oil Pans, ETC..
  • Made in The USA from ¼” USA Made Steel Plate, CNC Laser Cut and Bent on a CNC Brake Press Powder Coated Black with High Quality Zinc Coated Hardware. Mounts are marked with a D & P for driver and passenger side of engine and arrows will point to the front of engine..
Check Stock

Alex and Ani Women's Godspeed II ROG Bracelet, Shiny Rose Gold, Expandable

  • Optimal power & cooling solution: 12 power stages with ProCool II power connector, high-quality Chokes and durable capacitors to support multi-core processors, active cooling VRM heatsink, stacked-fin heat sink, with 8mm heat pipe, Dual on-board M. 2 heatsinks, a water pump + Header and multiple fun headers.
  • Best in class gaming networking: 2. 5Gbps LAN and Intel Gigabit Ethernet With Asus LANGuard, Wi-Fi 6 (802. 11Ax) with MU-MIMO, and Gateway teaming via GameFirst V.
  • Next Gen gaming connectivity: features 3x M. 2, USB 3. 2 Gen 2 ports and USB 3. 2 Gen 2 front panel Connector, 8x SATA 6 Gb/s..
  • Unmatched Personalization: OLED and ASUS-exclusive aura Sync RGB lighting, including RGB headers and addressable Gen 2 RGB headers.DIY friendly: ROG-patented pre-mounted I/O shield, Flex key, ASUS Safe Slot, ASUS Node connector and BIOS Flashback for a friendlier building experience.Industry leading gaming audio: high fidelity audio with Supreme S1220A, DTS Sound Unbound and Sonic Studio III to draw you deeper into the action.Ai overclocking: quickly optimizes your CPU performance based on the CPU and cooler, achieving results that are extremely close to manual tuning by experts.
Check Stock

2008-2014 Challenger R/T 2.5" Cat Back Exhaust - Violator Mufflers & Black Tips

  • Exhaust Headers(11-17 Dodge Hemi 57L Shorty Tuned Length - 1-3/4in Chrome).
  • As always BBK Performance exhaust headers are CNC mandrel bent for maximum performance right out of the box.
Check Stock