Reviews Head Gasket Leak Tests

Sherco-Auto K-Seal Multi Purpose One Step Permanent Coolant Leak Repair 8 oz Gasket Radiator

  • Permanent coolant leak repair - Just shake, pour and go. Mixes with all antifreeze. No draining or flushing..
  • Fixes cracks and leaks in radiator, head gasket, freeze plugs, cylinder heads, heater core, water pump casing and engine blocks.
  • The Safe and Easy Way to Fix a Coolant Leak. Works also a Radiator stop leak, head gasket stop leak and engine stop leak..
  • Permanent Coolant Leak Repair with K-Seal.
Check Stock

K-Seal ST3501 Pour and Go Permanent Head Gasket and Block Repair

  • Just Pour & Go – No Need for Expensive Head Gasket Repairs – The Safe and Easy Way to Fix a Coolant Leak.
  • Fixes blown head gaskets, cracked heads and blocks.
  • A permanent repair, guaranteed for the lifetime of the engine.
  • Scientifically Tested – K-Seal is the only product to have been successfully tested by the equipment at Brighton University and classes as meeting the demands of ASTM D3147.
  • If product did not seal head gasket leak, the system might be Over-pressurized, which causes back pressure and doesn’t allow the product to reach the problem area, on this page below under Technical Specification is a PDF Guide with instructions to follow to complete the repair successfully.
Check Stock

K-Seal ST5516 HD Multi Purpose One Step Permanent Coolant Leak Repair

  • Permanent coolant leak repair – Just shake, pour and go.
  • Fixes cracks and leaks in radiator, head gasket, freeze plugs, cylinder heads, heater core, water pump casing and engine blocks.
  • If product did not seal head gasket leak, the system might be Over-pressurized, which causes back pressure and doesn’t allow the product to reach the problem area, on this page below under Technical Specification is a PDF Guide with instructions to follow to complete the repair successfully.
Check Stock

Sterling Seal CRG7237.400.062.300X5 7237 Red Rubber Ring Gasket, 4.5\ ID, 4\ Pipe Size, 1/16\ Thick, Pressure Class 300# (Pack of 5)

  • You will get maximum performance from our gasket materials when you use our gasket installation procedure. [1] clean and inspect the flanges, surface or parts that require gasket.
  • Clean or replace your bolts, nuts & washers. Lubricate the bolt's, thread, nuts, washers and the underside of the head with graphite based compound.
  • Flat washers are recommended to assure even distribution of the bolting force. Ensure lubricant doesn’t contaminate gasket. Carefully insert the gasket between the mating surfaces.
  • The use of a torque wrench is highly recommended. This assures a longer life and leak free performance. Whether an automotive head gasket or a flange gasket, it should be torqued.
  • Make four even increment passes in a 12-6-3-9 o'clock pattern sequence. The appropriate stress on the gasket material you use is key to its success which varies depending material chosen.
Check Stock

Shower Head Extender, Stainless Steel Yandls Shower Arm Extension Built-in Hex Wrench, Adjustable Lower Shower Head, Chrome Shower Head Extension Arm, Bathroom Shower Accessory (5 inches)

  • 【Comfortable Shower】Shower head extension arm, lower the shower head arm, the perfect solution for high showering, relax and enjoy the showerhead comfortably.
  • 【Built-in Hex Wrench】Shower pipe extension has a built-in hex wrench, just hand tighten the pipe (no need to use pliers or wrench to tighten the pipe), and comes with a leak-proof sealing rubber gasket for quick and easy installation. Note: No tape is required, otherwise it may cause leakage..
  • 【Safe&Sturdy】Yandls shower head extender made of stainless steel, the connectors (G1/2 thread) at both ends are made of copper, and the surface is chrome-plated, safe, durable, sturdy, and not leak..
  • 【Universal Connection】Fit most shower accessories with 1/2 " IPS female and male, suite most standard shower system-shower base, shower arm, shower head, and shower hose..
  • 【What You Get】 Silver shower pipe extension tube and leak-proof gasket, 12-month product support, and our friendly and easy-to-reach customer service at no additional cost..
Check Stock

Sterling Seal CRG7237.750.062.150x20 7237 Red Rubber Ring Gasket, 1.06\ ID, 3/4\ Pipe Size, 1/16\ Thick, Pressure Class 150# (Pack of 20)

  • You will get maximum performance from our gasket materials when you use our gasket installation procedure. [1] clean and inspect the flanges, surface or parts that require gasket.
  • Clean or replace your bolts, nuts & washers. Lubricate the bolt's, thread, nuts, washers and the underside of the head with graphite based compound.
  • Flat washers are recommended to assure even distribution of the bolting force. Ensure lubricant doesn’t contaminate gasket. Carefully insert the gasket between the mating surfaces.
  • The use of a torque wrench is highly recommended. This assures a longer life and leak free performance. Whether an automotive head gasket or a flange gasket, it should be torqued.
  • Make four even increment passes in a 12-6-3-9 o'clock pattern sequence. The appropriate stress on the gasket material you use is key to its success which varies depending material chosen.
Check Stock

Sterling Seal CFF7237.400.125.150X5 7237 Red Rubber Full Face Gasket, 4.5\ ID, 4\ Pipe Size, 1/8\ Thick, Pressure Class 150# (Pack of 5)

  • You will get maximum performance from our gasket materials when you use our gasket installation procedure. [1] clean and inspect the flanges, surface or parts that require gasket.
  • Clean or replace your bolts, nuts & washers. Lubricate the bolt's, thread, nuts, washers and the underside of the head with graphite based compound.
  • Flat washers are recommended to assure even distribution of the bolting force. Ensure lubricant doesn’t contaminate gasket. Carefully insert the gasket between the mating surfaces.
  • The use of a torque wrench is highly recommended. This assures a longer life and leak free performance. Whether an automotive head gasket or a flange gasket, it should be torqued.
  • Make four even increment passes in a 12-6-3-9 o'clock pattern sequence. The appropriate stress on the gasket material you use is key to its success which varies depending material chosen.
Check Stock

C and R Racing Radiators 59-00001 Dike Stop Leak, 1 Pack

  • Can prevent a DNF in the event of a radiator puncture, cracked cylinder head, or head gasket Problem.
  • After extensive research, C & R racing has found a stop leak that doesn't leave a residue.
  • C&R Stop Leak stays suspended in the water so that when the water is drained, all of the stop leak is drained with the water leaving no residue.
Check Stock

12PCS 1 oz Small Empty Essential Oil Drop Bottle 30ml Square Essence Glass Dropper Bottles Lab Dropping Serum Container (Matte black)

  • Include:Each package include 12pcs square essential oil bottle with the head accessories.
  • Material:Thick Glass body,Plastic Glossy black rubber+neck,clear glass dropper,plastic white gasket for leak proof.
  • How to assemble:Each bottle is individually packaged,so you need assemble them.First put the rubber inside the black neck,than insert the dropper on the head ,final put on white gasket on the dropper screw the body.
  • Size:With the rubber head high is 10.3cm/4.06in,Long is 4.4cm/1.73in,width is 2.1cm/0.83in,capacity 30ml/1oz,Small size can easy carry.
  • Color:Have three color choose,Matte black, Matte clear and Clear color body, Accessories:rubber +neck is black , clear dropper and white gasket,use for filling essential oil,essence,serum liquid ect.
Check Stock

MP Michael Phelps XCEED Swimming Goggle Titanium Blue Lens/White/Blue One Size

  • Patented curved lens for expanded field of vision allows the swimmer to sight walls and the competition without altering head position.
  • Engineered with Exo-Core technology, which combines two materials for maximum performance.
  • Softer Anatomical Gasket provides a leak resistant seal and a low profile design.
  • Semi-rigid exoskeleton maximizes the structural strength and stability of the goggle.
  • Ultra soft Softer gasket provides a watertight seal and maximum comfort.
Check Stock

Mastercool 85510 R134a Can Tap Valve-Screw-On Model

  • M14-F x M10-FL-M. Gasket assures leak proof operation. Built-in safety check. Exclusive “full grip” valve knob..
Check Stock

BOX USA BHAZ1077 Metal Pail, Closed Head, 5 Gallon, Black (Pack of 1 Each)

  • Extra strong for safe P of hazardous materials.
  • Closed Head pails have a non-removable lid with a pour spout.
  • Open Head pails feature a leak proof gasket to ensure a tight seal.
Check Stock

Master Cooling System Test and Purge Auto Kit by Steelman, 27-Piece Kit, Leak and Pressure Test, Vacuum Purge Kit, Storage Case Included

  • 27-PIECE KIT – Kit contains 27 pieces including 22 different test caps, a vacuum pump, pressure pump, cone adapter, and air bleeding / coolant hoses.
  • LEAK AND PRESSURE TESTS – Perform leak and pressure tests on cooling systems, radiators and heater cores, head gaskets, headers, and water pumps.
  • TEST RANGE – Test for cooling system leaks at up to 35 PSI.
  • VACUUM REFILL – Includes vacuum purge kit to refill coolant systems and prevent air lock / contamination.
  • COLOR CODED CAPS – Test adapter caps are color coded for easy identification.
  • FOREIGN AND DOMESTIC – Fits a wide range of foreign and domestic models including Ford, GM, Honda, Mazda, Audi, Nissan, Toyota, Chevy, and more.
  • STORAGE CASE – Kit comes with a convenient blow-molded red plastic case for easy organization and storage.
Check Stock