Reviews Hdpe Coupling

Ateco Cake Decorating Set - Couplers Decorating Bag and Decorating Tubes

  • This Universal Coupler accommodates ANY decorating tip with an bottom opening between 0.5 inch to 1.5 Inch, it will fit nearly all tips available from....
  • Eliminates the need to empty your decorating bag before changing tips.
  • Made of durable, white HDPE plastic with ridged sides along ring for easy assembly and the cap allows keeps icing from drying out between uses.
  • This Coupler replaces the need for multiple couplers and includes the coupling capabilities of the Ateco 398, 402, and 404 all in one coupler.
  • Ideal for bakeries and cafes or for family baking.
Check Stock

RecPro RV 39 Gallon Fresh Water Holding Tank for Campers, Trailers and RV Tank with Sensors

  • Blow-molded HDPE tanks are an integral component to all recreational vehicles.
  • The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and thermoformed varieties.
  • Tanks are built to standards specified by IAPMO (International Association of Plumbing and Mechanical Officials) and the Canadian Standards Association.
  • 27.7 Width x 53.5 Length x 7.5 Height Holding Tank 39 – Gallon, Blow-molded with 1 Inch Coupling.
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

RecPro RV 33 Gallon Black Waste Water Holding Tank for Campers, Trailers and RV's | Made in America

  • The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and thermoformed varieties..
  • Blow-molded HDPE tanks are an integral component to all recreational vehicles..
  • Built to standards specified by IAPMO (International Association of Plumbing and Mechanical Officials) and the Canadian Standards Association.
  • 22 Width x 54 Length x 8 Height Holding Tank 33 Gallon, Blow-molded with 3 Inch Coupling.
Check Stock

SharkBite 1/2-Inch Straight Coupling, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 1/2-inch straight coupling requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U008LF and U008LFZ.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

RecPro RV 45 Gallon Fresh Water Holding Tank for Campers, Trailers and RV Tank with Sensors | Made in America

  • The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and thermoformed varieties.
  • Blow-molded HDPE tanks are an integral component to all recreational vehicles.
  • Tanks are built to standards specified by IAPMO (International Association of Plumbing and Mechanical Officials) and the Canadian Standards Association.
  • 27.7 Width x 53.5 Length x 7.5 Height Holding Tank 45 - Gallon, Blow-molded with 3 Inch Coupling.
Check Stock

RecPro 44.5 Gallon RV Black Waste Water Holding Tank 63\ x 25\ x 9 1/8\ | Campers, Trailers and RV's | Made in America

  • The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and thermoformed varieties..
  • Blow-molded HDPE tanks are an integral component to all recreational vehicles..
  • Built to standards specified by IAPMO (International Association of Plumbing and Mechanical Officials) and the Canadian Standards Association.
  • 25 Width x 63 Length x 9.132 Height Holding Tank 44.5 Gallon, Blow-molded with 3 Inch Coupling.
Check Stock

Ateco Universal Pastry Coupler and Cap Set | 7 Piece Set | Works with 250 Ateco decorating Tubes plus tips from other brands

  • This Universal Coupler accommodates ANY decorating tip with an bottom opening between 0.5 inch to 1.5 Inch, it will fit nearly all tips available from....
  • Eliminates the need to empty your decorating bag before changing tips.
  • Made of durable, white HDPE plastic with ridged sides along ring for easy assembly and the cap allows keeps icing from drying out between uses.
  • This Coupler replaces the need for multiple couplers and includes the coupling capabilities of the Ateco 398, 402, and 404 all in one coupler.
  • Ideal for bakeries and cafes or for family baking.
Check Stock

9 Pcs Ortho Drill Bit Set, AO 1mm,1.5mm,2mm,2.5mm,2.7mm,3mm,3.2mm,3.5mm, 4.5mm

  • Included: (1) 1 mm x 10 cm Drill Bit, AO Coupling (1) 1.5 mm x 14 cm Drill Bit, AO Coupling (1) 2 mm x 10 cm Drill Bit, AO Coupling (1) 2.5 mm x 14 cm Drill Bit, AO Coupling (1) 2.7 mm x 14 cm Drill Bit, AO Coupling (1) 3 mm x 10 cm Drill Bit, AO Coupling (1) 3.2 mm x 10 cm Drill Bit, AO Coupling (1) 3.5 mm x 14 cm Drill Bit, AO Coupling (1) 4.5 mm x 14 cm Drill Bit, AO Coupling.
  • Features: Autoclaveable, German Stainless Steel, 5 Year Warranty, O.R Grade.
Check Stock

American Standard AS738756-0070A Champion 4 Tank to Bowl Gasket, 1 pack, Black

  • BEST-IN-CLASS: The American Standard toilet bowl to toilet tank coupling kit ensures there are no surprise leaks with your toilet.
  • PERFORMANCE: American Standard toilet parts provide durability for bathrooms for years to come. With the Champion 2 coupling kit, expect reliable performance and durability.
  • COMPATIBILITY: Before you install, confirm compatibility by ensuring that your toilet will accept this toilet bowl to toilet tank coupling kit by checking repair part information.
  • FLAWLESS DESIGN: Designed to keep the toilet bowl and toilet tank connected with no leaks, this American Standard coupling kit is easy to install and is durably constructed.
  • INCLUDES: Coupling kit includes the toilet tank gasket, speed connect tank to bowl bolt kit with two 5/16 in. hex nuts, captive washers and speed connect bolts, two grommets, a Fluidmaster coupling nut, washer, and a close coupling washer.
Check Stock

285753A 285140, 280152, 285743, 285753, 285753AVP, 62672, 62693, 80008 3364003 3364002 AP3963893 Washer Motor Coupler, Motor Coupling Kit, Replacement for Maytag Kenmore Washing Machine

  • [285753A Packing Include] You will get 1Set 285753A Washer Direct Drive Motor Coupling..
  • [Part Number]280152, 285140, 285743, 285753, 285753A, 285753AVP, 21003, 62672, 62693, 80008, 661560, 3352470, 3363664, 1195967, AP3963893, PS1485646, EAP1485646, etc..
  • [285140 Compatible] Replacement for Kenmore, Crosley, Roper, Admiral, Amana, Estate, Inglis, etc., and Other Major Brands..
  • [Washer Direct Drive Motor Coupling Premium Quality] Our Washer Direct Drive Motor Coupling Made from heavy-duty plastic, It meets or exceeds all original manufacturer specifications for fit and performance..
  • [Service Gurantee] This Washer Direct Drive Motor Coupling comes complete with a 12-Month warranty. Our department Usually does a 100% quality inspection on the Washer Direct Drive Motor Coupling before delivery. We will refund if the Washer Direct Drive Motor Coupling is defective. If you have any problems, feel free to contact us..
Check Stock

CENTAURUS 4Pcs Universal Motor Joint Shaft Coupling 4mm to 4mm with Screws

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade Universal Motor Joint Shaft Coupling 4mm to 4mm is 100% brand new,wearproof, durable and widely used for motor etc..
  • 【HIGH QUALITY】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is made of high quality wearproof steel material which can use for a long time..
  • 【WIDE APPLICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is widely used for shaft connection,produced based on International Flange Standard..
  • 【MAIN SPECIFICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm ,Inner Diameter: 4mm to 4mm. Outer Diameter is 9mm. Height is 23mm. Color: Silver.
  • 【PACKAGE & SERVICE】Package Include: 4Pcsx 4mm to 4mm Universal Joint Shaft Coupling.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

5pcs M8 x 1.25 x 35mm Stainless steel Long Coupling Hex Nut Connector

  • 1/4-28 X 7/8" long, fine threads, 3/8" across the flats steel coupling nut with zinc finish.
  • Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
  • Zinc plate over steel - more rust resistant.
  • Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.
Check Stock