Reviews Hdf Mould Door Skin

Ice Roller for Face, Black Facial Ice Roller Mould, Silicone Face Ice Cubes for Skin Care and Pain Relief, Reusable DIY Facial Care Ice Mould

  • 【Easy to Make Ice & Demould】After frozen for no less than 12 hours in the environment below -10℃, submerge one end of the lid of the frozen ice mould under running water for 30 seconds, and then easily remove the lid horizontally..
  • 【Anti-Spill Design】We added a high quality silicone sealing ring to the seam in the middle of the ice mould, which can enhance the sealing performance of the ice mould and prevent the water in the mould from overflowing..
  • 【Good for Skin Care】The face roller with ice on the face can Improve puffiness, Moisturizing before makeup, Soothes and repairs after sun exposure, Shrink pores and tighten skin and Improve fine lines. Different DIY beauty materials can be matched according to your needs. (Such as Cherry Tomatoes, Milk, Rose, Cucumber, Lemon ect).
  • 【Also Good for Pain Relief】This ice mould is a very practical must-have gadget at home. In addition to good for facial rejuvenation, you can Use this ice mould to ice compresses for relieving physical discomfort. (Such as Toothache, Headache, Fever and Sprain ect).
  • 【Practical Gift】This ice mould is approx. 2.2 x 1.6 x 3.9 inch which is very comfortable to hold, small and light design, and easy to grasp, also the ice roller hea....
Check Stock

Bamboo Shower Caddy, This Over The Door Shower Caddy Is a Stylish and Eco Friendly Shower Organizer with Ample Shower Storage

  • Shower Door Caddy: Relax and enjoy your shower in a organized and tidy space..
  • Easy Installation: Ideal for showers with glass doors/enclosures, the hanging shower caddy easily mounts on to door or rail up to 1 inch, no fixings or tools required..
  • Eco friendly: this shower storage is made from sustainable bamboo, the bamboo shower caddy and packaging is plastic free..
  • Functional: this over-door shower caddy has two large shower baskets for shampoos etc and has two hooks for razors and loofahs etc..
  • Mould Free: Water and mould resistant design, tripple coat laquer finish, waterproof rated..
Check Stock

Lift Safety DAX CARBON FIBER CAP hard hat with 6 point suspension

  • 1 of Lift Safety HDF-15NG DAX Hard Hat, Natural.
  • 1 of Lift Safety HDF-18RS DAX Hard Hat Replacement Suspension.
Check Stock

HQRP 2-Pack Wick Filter Compatible with Kaz 3000, 3300, 3400, EV710 Evaporative Humidifers, WF1 WF-1 Replacement

  • HQRP® 2-pack Humidifier Wick Filter Replacement.
  • Compatible with Kaz filter WF1 (WF-1) / Emerson HDF1 (HDF-1).
  • For optimum performance, replace filter every 2-3 months.
Check Stock

Comfy Hour 4.72" Cast Iron Cat Door Stopper Home Decoration, Black, Antique & Vintage Collection

  • Dimensions: 5 inch (Length) x 2.44 inch (Width) x 4.72 inch (Height).
  • Play kitty cat door stopper in black color vintage or rusty looking. Home decorative and functional collection in rustic finish.
  • This product is completely controlled and made by hand and quality is strictly checked through every production process from beginning to finishing: making wooden mould then aluminium production mould, pouring cast iron, polishing surface, painting, and finally quality inspection before packing into box.
  • Heavy duty and quality guarantee-not only decorative but also functional-make your room corner more charming-perfect gift for cat lovers.
Check Stock

Ameriwood SystemBuild Clarkson Mini Refrigerator Storage Cabinet (Black)

  • The smartly designed SystemBuild Clarkson Mini Refrigerator Storage Cabinet is perfect for any space that needs a mini fridge, such as dorm rooms, recreation rooms, and basements..
  • Designed to be placed over the top of a compact refrigerator, the storage cabinet provides space for storing a variety of items..
  • The upper two doors lock, making this item a great liquor cabinet. The middle shelf is ideal for a microwave, snacks, cereal, or for showcasing collectibles..
  • Crafted in a sleek black finish, this HDF and laminated particleboard cabinet seamlessly blends with the rest of your décor, adding extra storage room at the same time..
  • Keys for the storage cabinet’s door locks come included. Some assembly is required. This item measures 72″ H x 23-1/2″ W x 15-5/8″ D and comes with a one-year limited warranty..
Check Stock

Seasonal Interchangeable Welcome Sign for Front Door Decor, Welcome to Our Home Sign with Interchangeable Holiday Pieces, Welcome Door Sign for Farmhouse Front Porch Decor and Housewarming Gift(Black)

  • ...bit, Sun, Daisy, Pineapple, U.S.A Star, Pumpkin, Maple Leaf, Turkey, Christmas Tree, Snowman. It meets the need of the holiday decoration throughout the year, such as Valentine's Day, St. Patrick's Day, Easter, July 4th Independence Day, Halloween, Thanksgiving, and Christmas Day. Furthermore, these interchangeable door signs very easy to replace since the magnetic design..
  • Excellent Details: Eucalyptus leaves and bow are fixed by bind wire on the welcome home sign board, which is very firm and avoids the problem of greenery easily falling like other similar products. The hanging rope is detachable and adjustable..
  • Plaque Material And Size: These welcome signs for front door decor are made of premium HDF, durable and beautiful. Diameter 12'', thickness 0.34'', thickened wood is more durable and textured..
  • Perfect For Any Home & Perfect Gift: Our welcome wreaths for front door with a detachable and adjustable hanging rope, you can easily place it at anywhere throughout your home, such as hang on the front door, front porch, back door, entryway, on the wall of living room, bedroom, gallery, or leaned on a shelf etc. In a word, in any home you can always find a perfect place to put it. Therefor this rustic farmhouse decor for door/wall decorations is ....
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

Household Double Head Automatic Dumpling Maker Mould,Sameme Dumpling Press with Kneading Pad,2 Dough Pressing Tools and Spoon.Quick Dumpling Empanadas Pierogi Maker Tools for Home,Kitchen Restaurant

  • ...fing Spoon.This flour board strongly adhesive to the countertop,which will not slip or crinkles.Great for kneading dough.The dough press is 8cm,match for dumpling trough perfectly.stuffing spoon will help you add dumpling fillings easily..
  • 【Food Grade Material】: The household double head automatic dumpling maker mould set is made of high-quality and food grade ABS and 304 stainless steel, no odor and BPA-free, durable.The non-slip rubber pads on the base are stable.The machine is easy to clean, just rinse with clean water..
  • 【How to use】: The empanada maker press is easy to use.First open the unlocking device, then put the dumpling skin into the dumpling slot, add dumpling fillings you prefer,press down and you will get 2 nice wavy dumplings in no time.(Before placing the dough on the mould, sprinkle some flour on the mould to prevent sticking)..
  • 【Convenient&fast】: The dumpling maker will allow you to wrap two at a time for quick dumplings even if you are a beginner.so It will drastically reduce your workload and even reduce your preparation time by at least half.Make dumplings more convenient and effective!.
  • 【Professional Design】: Our automatic dumpling maker machine is very professional,it can also be used as an empanada maker, momo make....
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock

Whaline Christams Gingerbread House Baking Tray Silicone Molds for Desserts Chocolate Candy,Cookies 2 Pieces

  • PACKAGE INCLUDE - 2 pieces Christmas theme silicone molds, totally 16 mould pits. Enough quantity and patterns for festive use and daily use. Delicate....
  • 3D HOUSE DESIGN - 2 roof mould pieces and 4 wall mould pieces can used for house building and tree, gingerbread, bird animal mould can stand beside....
  • SAFE MATERIAL - Made of good-quality silicone, our molds are available in ovens, freezers, microwaves and dishwashers. Flexible, non-stick and easy....
  • SIZE - Silicone mould is measuring 28.3x 18.1 x 0.8cm .1inx 7.1in x 0.31in. Each mould pit is suitable for making a chocolate house. You can put the....
  • GREAT FESTIVE DECOR- Perfect for Christmas party, holiday family gathering and new year party. You make chocolate house decor for cake, bakery,....
Check Stock

3 Shapes Storage Box Resin Moulds with Lids Crown Resin Jar Mould Jewelry Jar Silicone Mould Jewelry Ring Box Epoxy Mould Storage Bottle Casting Moulds for DIY Container Soap Candle Trinket Making

  • Nice combination: the package comes with 3 shapes storage box resin moulds with lids, including 1 crown resin jar mould, 1 vintage stripe edge box resin mould, 1 mini jewelry box mould, different styles for you to choose, allow you have a interesting making time.
  • DIY as you want: you can DIY your own jar with different options like glitter powder, mica powder, liquid resin dye or dried flowers and so on, to make a nice home decor or a gift for your family and friend by your imagination.
  • Reliable quality: made of silicone material, smooth and washable, you can clean and store the jewelry jar silicone mould easily, saving you much time and energy.
  • Easy to release: our jewelry ring box epoxy mould is easy to operate, you just need to twist the mould and release your creation out of your mould after the resin is completely cured.
  • Your piece comes out easily, no sticking, no tearing while the mould maintains its shape.
  • Functional usages: ideal for making craft projects and jewellery DIY storage box, gift box, candy box, candlesticks, items containers, flower pot or other items, the finished crafts will also be beautiful decorations for your home, office, shop and other places.
Check Stock