Reviews Hayabusa Radiator Cap
Radiator Pressure Cap, Coolant Reservoir Cap Replace RS-527, RS527, 9C3Z-8101-B, 9C3Z8101B Compatible with Ford 6.0 7.3 Powerstroke - Explorer F150 F250 F350 Mustang Taurus, Lincoln, Mercury, More
- REPLACEMENT RADIATOR PRESSURE CAP : The radiator cap holds the coolant inside the radiator, but it also works as a two-way valve that keeps the right pressure inside so the radiator does it work correctly. If the pressure isn't maintained, the coolant can boil and evaporate, putting the engine at risk of overheating. Symptoms of a Bad Radiator Cap: air enters the system, low coolant level, coolant leaks, overflowing reservoir, overheating engine..
- COMPATIBLE WITH FORD VEHICLES : 1992-2011 Crown Victoria | 2003-2014 Ford E150, E250 | 2007-2014 Edge | 2000-2005 Excursion | 1997-2013, 2015-2017 Expedition | 2002-2005, 2011-2019 Explorer | 1997-2017 F150 | 1997-1999 F250 | 1999-2016 F250 Super Duty | 1997 F350 | 1999-2017 F350 Super Duty | 2009-2019 Flex | 2006-2013 Fusion | 1996-2014 Mustang | 2013-2019 Police Interceptor | 2001-2011 Ranger | 1996-2019 Taurus | 1994-1997, 2002-2005 Thunderbird | 1999-2003 Windstar radiator cap..
- REPLACES PART # : RS-527, 9C3Z-8101-B, RS527, 9C3Z8101B radiator cap. The radiator cap can compatible with Lincoln, Mercury : 2003-2005 Aviator | 1995-2002 Continental | 2000-2006 LS | 2009-2016 MKS | 2010-2019 MKT | 2007-2017 MKX | 2007-2....
Check StockATD Tools 3305 10-Piece Radiator Pressure Tester Update Kit
- Adapter update Kit to use with ATD-3300 Test Kit, 10 piece.
- Detects internal engine leaks caused by blown head gaskets and/or cracked block or heads.
- including radiator, heater core and radiator cap.
- Kit includes 8 radiator adapters and 2 radiator cap test adapters to fit the most popular domestic and import cars and light trucks.
- Kit Includes: 8 Anodized Aluminum radiator Adapters, 2 Radiator cap test adapters, Instructions, Storage and Carrying case.
Check StockHigh Pressure Radiator Cap with Temperature Gauge, 1.8 Bar Radiator Cap 25.6psi Compatible with Honda, Kawasaki, Suzuki, Yamaha, Polaris Ranger, Husqvarna Dirt Bike, KTM, More Motorcycle ATV Models
- REPLACEMENT 1.8 HIGH PRESSURE RADIATOR CAP : Accurate read out in Celsius and Fahrenheit - This high-pressure radiator cap will give you real-time temperature monitoring with accurate readings in both Celsius and Fahrenheit (32-400). It has a bright color gradient meter that provides high visibility to assist you in understanding what the temperature of your engine means, and can help prevent costly engine overheating..
- COMPATIBLE WITH THESE VEHICLES : Honda CR125R, CRF250R, CRF250X, CRF450R, XR650R | kawasaki KLR650, KX250, KX250F, KX450, KX450F, KX65 | Suzuki DR-Z400, DR-Z400S, DR-Z400SM, RM250, RMZ250, SV650 | Yamaha Banshee 350, Rhino 450 660 700, WR400F, WR450F, YZ400F, YZ450F, YZ450Z | Polaris Ranger, Does Not Fit RZR Models | KTM 250, 300, 350, 450, 500 & more vehicles 1.8 bar high pressure radiator cap. Please check the detailed description before purchase. Thank you!.
- REPLACES PART # : 1.8 high pressure radiator cap. This 1.8 High Pressure Radiator Cap with Temperature Gauge makes it easy to keep an eye on your machine's temperature. Our innovative design gives you the benefits of a standard radiator with temperature monitoring on your 2 or 4 strok....
Check Stock18 Pieces Radiator Pressure Pump Cooling System Car Leak Detector Tester Tool Water Tank Adapter Car Coolant Vacuum Cleaner Head Gasket
- ◇ Function --- This radiator pressure tester kit allows you to change coolant and test for leaks in your vehicle's cooling system, including the radiator, heater core and radiator cap, in a simple and straightforward manner..
- ◇ Premium Quality --- Made of high quality and durable material, high strength and toughness, providing higher stability and longer service life..
- ◇ Note ---If the temperature is too high, you may get scalded. Before you open it, make sure the tank is cool when you use it..
- ◇ Easy to Use --- Remove the original radiator cap, select an available radiator cap from the test kit, and install it on the radiator port. Operate the hand pump until the pressure reaches 10-15psi (avoid reaching 35psi). Check the pressure gauge reading. If the reading drops automatically, the radiator may be leaking. Have the radiator system checked and repaired if necessary. Typically, it takes about 10 minutes to test for leaks and is a very quick and easy operation..
- ◇ Packing list --- 1*pressure test pump with pressure gauge, 1* thermometer, 3*chrome-plated steel ....
Check StockBar's Leaks Cooling System Radiator Stop Leak 16.9 oz.
- ...ign and polished surface treatment, the repeatedly polished surface is not easy to stain and smooth. The blue logo on the black lid is more conspicuous and more fashionable..
- ❤[Install]Just unscrew the old cover and tighten the new cover to install, you can perfectly replace the original parts. Before removing the radiator cap, make sure that the engine has cooled down, because removing the radiator cap from the cooling system may cause sudden injection of coolant. And severe burns..
- ❤[High Quality]It is manufactured by the OE manufacturer according to strict OE specifications and is 100% inspected before leaving the factory to ensure product safety, stability and durability. It has been carefully designed for the outdoor cooling system and overflow box system to provide the same components and functions as the original version of the specific car..
- ❤[Quality Material]Coolant recovery bottle cap is made of high-quality ABS material, with excellent comprehensive physical and mechanical properties, good low-temperature impact resistance, air tightness, very durable, long service life, and can isolate the upper and lower spaces. The radiator cap keeps the coolant inside the radiator, but can also be used as a two-way valve to maintain the correct pre....
Check StockAiCooler Radiator Safety High-Pressure Temperature Gauge Cap Compatible with select BETA, HUSABER, KTMs(19XX-2016), and most Western Motorcycles 1.8Kg/cm2 (25.6PSI) Model: MW1RB Royal Blue MW1-RB
- (PROMISE)If our AiCooler Radiator Cap fails on your motorcycle, please be free to contact us for a replacement. Also if you have any other questions on AiCooler 1.8 high pressure radiator cap, please contact us at the first time. This is NOT a OEM/ genuine part, the Radiator Cap is a modified replacement part manufactured by AiCooler with our design Patent!.
- High-pressure 1.8 Bar radiator cap with a temperature gauge. Cap reads both Celsius and Fahrenheit with 32-400 degree F range and 0-200 degree C range..
- Providing an accurate temperature reading of your coolant/water. Ensure riding safety by keeping an eye on your machine's temperature..
- Designed to handle increased water pressure and temperatures. Actually compatible with most KTM from 19XX until 2016 If it doesn't fit please send it back for a full refund and try another model: MAJ1-B, it should fit then!.
- Upgrade your European and/ American bikes standard OEM Radiator Cap: compatible with most models of select BETA, HUSABERG, some HUSQVARNA Series, compatible with KTM( 19XX-2016 ), Husqvarna, and most Western Motorcycles, Dirt Bikes, ATVs, UTVs, and more..
- Included components: Radiator Safety High Pressure Cap.
Check StockABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit
- PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
- Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
- FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
- The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
- Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
- BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
- While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
- Constructed from opaque yellow hard-plastic components.
- 3 out of 5 cap adaptors include steel rings to hold the ada....
Check StockMASTERCOOL 43301 27 Piece Master Radiator Pressure Test Kit
- Detects and exposes external system leaks.
- Detects internal engine leaks due to blown gaskets or cracked block.
- Vacuum type cooling system, Purge and refill for quick change of coolant, Test Range: 0 - 35 psi, Includes 1 blue radiator cap test connector....
- Includes 1 black radiator cap test connector R123/R124 Includes 1 thermometer, 1 universal radiator cap, 1 vacuum purge and refill tool, coolant hose....
- Includes hand pump and 19 adapters (No. 's 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) to fit most popular domestic and....
Check StockMr. Gasket 2470S Domestic ThermoCap 13 PSI-SLVR
- Combines a pressurized radiator cap with a thermometer element that eliminates potentially dangerous guesswork.
- Lets you know exactly when your coolant temperature is low enough to safely open your radiator cap.
- To install just take off your old cap and screw on the new one.
- If the temperature gauge indicates that the coolant is too hot just rinse the radiator with cool water until the temperature drops into a safe zone.
- Also available in blue (part number 2470B) and red (part number 2470R).
Check StockFEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm
- ...ter in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
- Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
- Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
- Wide Application: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible for Cadillac, B....
Check StockDASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters
- Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
- Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
- Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check StockRadiator Surge Tank Cap,Coolant Reservoir Cap Compatible with Ford F150 F250 F350 F450 F550 F600 Bronco Edge Escape Ranger Focus Mustang Fusion Expedition Explorer Transit &Lincoln Aviator MKC MKX MKZ
- 【COOLANT RESERVOIR CAP】Radiator Surge Tank Cap Is 100% Rigorously Tested Before Shipping. Check The Part Number To Confirm The Compatibility Before Purchase..
- 【COMPATIBLE WITH FORD】Radiator Surge Tank Cap Compatible With Ford 2021-2022 Bronco | 2021-2022 Bronco Sport | 2013-2018 C-Max | 2018-2022 EcoSport | 2015-2022 Edge | 2013-2022 Escape | 2018-2022 Expedition | 2020-2022 Explorer | 2015-2022 F150 | 2020-2022 F250 F450 F550 F-600 Super Duty | 2011-2019 Fiesta | 2012-2018 Focus.
- 【COMPATIBLE WITH FORD】Radiator Surge Tank Cap Compatible With Ford 2013-2020 Fusion | 2022-2022 Maverick | 2015-2022 Mustang| 2021-2022 Mustang Mach-E | 2020-2022 Police Interceptor Utility | 2019-2022 Ranger | 2019-2020 SSV Plug-In Hybrid | 2014-2022 Transit Connect | 2015-2022 Transit-150 Transit-250 Transit-350 Transit-350 HD.
- 【COMPATIBLE WITH LINCOLN】Coolant Reservoir Cap Compatible With LINCOLN 2020-2022 Aviator | 2017-2020 Continental | 2020-2022 Corsair | 2015-2019 MKC | 2016-2018 MKX | 2013-2020 MKZ | 2019-2022 Nautilus | 2018-2022 Navigator.
- 【CUSTOMER SERVICE】If For Any Reason....
Check StockTomGoo Universal 1L Radiator Coolant Overflow Tank,Recovery Coolant Bottle,Polished Aluminum(Silver)
- ...Level Indicator.Two Barbed Hose Connector, Two Plugs And Liquid Level Indicator Are Pre-installed On The Product, Which Can Be Used Directly. This Coolant Overflow Tank Universal Fit For Most Car,Additional Accessories Can Help You Modify The Overflow Bottle To Fit Your Car!.
- 【How To Work】When The Coolant In The Radiator Expands During Heating And The Pressure In The radiator Exceeds The Design Pressure Of The Radiator Cap, The Coolant Will Flow Into The Radiator Overflow Tank Through The Overflow Port. When The Radiator Cools Down, A Vacuum Is Created And Fluid Is Drawn From The Coolant Recycling Box Back To The Coolant Recover Tank!.
- 【Advantage】Coolant Overflow Tank Made Of 6061 Aluminum For Enhanced Strength, Anodized Polished And Durable, Better Than Plastic Material。Radiator Coolant Overflow Tank Tight Closed Cap, Fully Tig Welded And Thread Come With O-Ring Gasket, Keep A Good Closed Environment And Prevent Coolant Leakage.Magnetic Drain Plug At The Bottom For Easy Draining And Cleaning..
- 【High Performance】Catch The Overflow Coolant From The Radiator And Store. Due To The Way Coolant And The Radiator Works, The Air Is Sucked Into The Radiator Instead Of Coolant Which Results In The Formation Of Rust. Install Overflow Bottle For Radia....
Check Stock