Reviews Hart Tool Combo Kit

YJINGRUI USB Hart Modem USB to Hart Protocol Modem Hart Transmitter for All Hart Protocol Device Rosemount/ABB/Vega/E H/ETC Adapt to Windows XP/7/8/10 with Built-in Loop Resistor

  • Application: Provide a flexible PC communication link to HART networks and power kit and loop resistor, for commissioning, servicing, calibrating, or acquiring data from any HART instrument or transmitter..
  • Software: Make sure you have the correct software to communicate to the modem. Then you can connected to the field equipment successfully..
  • Parameters: {Interface: USB-A} {Hart connection: 2-wire and polarity insensitive test clips} {Option mode: 1) 24VDC/270Ω. 2) Normal. 3) 270Ω}.
Check Stock

Full Version USB Hart Modem WS232UP Hart -USB Modem Hart Transmitter with Built-in 24VDC & Loop Resistor for All HART Device

  • The Latest Full Version USB HART MODEM WS232UP, With Built-in 24V DC & Loop Resistor, Windows XP/7/8/10 Support, Suitable For All Devices Which Support HART Protocol, etc..
  • The WS232UP USB-HART Modem provides a complete and flexible PC communication link to HART networks and power kit and loop resistor, for commissioning, servicing, calibrating, or acquiring data from any HART instrument or transmitter. The WS232UP is developed based on BELL202 modem standard, this external interface is rugged and compact and ideal choice for field service, commissioning, engineering, training, table top shows, lunch and learns and demo cases..
  • Fully HART compliant for communication with any HART instrument and error-free slave testing * DC-DC isolation power draws from USB port and needs no external power supply.
  • * Three modes: 1) 24VDC/270Ω. 2) Normal. 3) 270Ω. The mode is easily slide-switch selected so you’ll always have a power supply or loop resistor with you * Easy installation and use, this modem can power all 2-wire HART devices-independent of supplier.
  • * Rugged aluminium alloy case gives you industrial-grade reliability in a small package * Free HART application software for you to configure your HART device * Smart Design, smaller than a normal name card.
Check Stock

Hart 40 Volt 4.0 Ah Lithium Ion Battery

  • Every HART 40V battery works with every HART 40V tool.
Check Stock

HART 40-Volt 5.0Ah Battery Accessory Lithium-Ion On-Board Fuel Gauge

  • Every HART 40V battery works with every HART 40V tool.
Check Stock

PORTER-CABLE Cordless Drill Combo Kit Power Tool, 4-Tool (PCCK616L4)

  • 1/2-inch two-speed drill/driver in the cordless drill combo kit has the power needed to complete applications with ease. Lightweight and compact design reduces fatique (3.5 lbs). Drill/driver features ergonomic handle, LED light and bit storage.
  • 5 1/2-inch circular saw delivers 3700 RPM for a variety of cutting applications. 5 1/2-inch 18T carbide blade is included in the cordless tools combo kit. Saw features tool free depth adjustment and bevels at 45 and 90 degrees.
  • Compact reciprocating saw in the cordless tool set features 0-3000 SPM, 7/8-inch stroke length, tool free blade change and pivoting shoe.
  • Compact reciprocating saw features 0-3000 SPM, 7/8-inch stroke length, tool free blade change and pivoting shoe.
Check Stock

PORTER-CABLE 20V MAX* Cordless Drill Combo Kit, 6-Tool (PCCK617L6)

  • 1/2-inch two-speed drill/driver in the cordless drill combo kit has the power needed to complete applications with ease. Lightweight and compact design reduces fatique (3.5 lbs). Drill/driver features ergonomic handle, LED light and bit storage.
  • 5 1/2-inch circular saw delivers 3700 RPM for a variety of cutting applications. 5 1/2-inch 18T carbide blade is included in the cordless tools combo kit. Saw features tool free depth adjustment and bevels at 45 and 90 degrees.
  • Compact reciprocating saw in the cordless tool set features 0-3000 SPM, 7/8-inch stroke length, tool free blade change and pivoting shoe.
  • Compact reciprocating saw features 0-3000 SPM, 7/8-inch stroke length, tool free blade change and pivoting shoe.
Check Stock

BOSCH Power Tools Combo Kit GXL12V-310B22 - 12V Max 3-Tool Set with 3\\/8 In. Drill\\/Driver, Pocket Reciprocating Saw and LED Worklight

  • 3 TOOL COMBO KIT: This 3 Tool 12V max Combo kit gives users a complete package with a powerful drill/driver, a compact reciprocating saw, a bright worklight, two 12V max 2.0 Ah batteries and a charger.
  • COMPACT: The compact, lightweight two pound PS31 drill/driver provides powerful performance, including 265 inch pounds of maximum torque but is able to fit into tight work spaces with a 7.0 inch head length.
  • BALANCE: The PS60 reciprocating saw features a balanced, easy to use, lightweight design. It’s great for overhead applications and delivers 0 3,000 no load strokes per minute for outstanding performance in a small saw.
  • CONVENIENT: The three tool combo kit also comes with a compact 12V max worklight for bright illumination in dark work areas with three hours of runtime for every battery amp hour. (Ah).
  • VARIABLE SPEED: The drill/driver provides variable speed settings.
  • high power (0 350 no load rpm) and high speed (0 1,300 no load rpm) options for versatility. The PS31 also features 20 plus 1 clutch settings so users can make detailed torque adjustments for maximum accuracy.
Check Stock

DEWALT 20V MAX* Cordless Drill Combo Kit , Brushless, (DCK277C2)

  • DEWALT brushless motor of cordless drill combo kit delivers up to 57% more run time over brushed.
  • Compact (5.4-inch front to back), lightweight (2.0 lbs) Impact Driver design of the corodless tools combo kit fits into tight areas.
  • Compact (7.52-inch front to back), lightweight Drill/Driver in thed drill/ impact driver combo kit is designed to fit into tight areas.
  • Ergonomic comfort grip handle provides ideal balance and tool control.
  • LED light with 20-second trigger release delay provides increased visibility in dark or confined spaces.
  • Impact driver's one-handed loading 1/4-inch hex chuck accepts 1-inch bit tips.
Check Stock

Powerworks 20V Cordless Drill Impact Driver Combo kit, 3/8” Drill & 1/4” Hex Impact Driver Brushless Power Tool Kit, Included 1 Battery, 1 Charger,1 Bag

  • [MAX 4ah Battery] The Combo kit comes with 4.0 Ah large capacity Li-ion battery, which means all-day operation is completely feasible and you never need to worry about running out of power in the middle of a project..
  • 【Drill Driver Features】3/8-Inch Keyless Chuck, 0-650 (RPM), 11 Position Clutch, 150-In-Pound of Torque..
  • 【Impact Driver Features】 1/4-Inch Coupler, 0-3, 000 (RPM), 3, 900 (IPM), 1, 375 In-Pounds of Torque..
  • 【Lightweight & Ergonomic】 Our 20V power tool combo kit weigh only ‎5. 6 Pounds (Tool), you can control them at ease, whatever how long you operate the drivers. Especially, it's more friendly to ladies. And the ergonomic non-slip handle is comfortable for you to grip..
  • 【One Battery for All & Widely Applications 】Our lithium-ion batteries are compatible with Powerworks tools in the same voltage range for total freedom of movement when gardening without tangled cables. Our Powerworks high quality power tool combo kit is ideal for hanging pictures, assembling or repairing furniture, tightening screws and many other DIY and craft projects. Our drill is also an ideal gift for your mom, wife, girl friend, daughter, or an independent friend..
Check Stock

Bosch 18V 2-Tool Combo Kit with 1/2 In. Compact Drill/Driver and 1/4 In. Hex Impact Driver GXL18V-26B22

  • COMBO KIT: The Bosch GXL18V-26B22 is a reliable compact combo kit that includes two 18V tools (impact driver and drill/driver) designed to fit in tight areas and to provide Pro performance, along with two 2.0 Ah 18V batteries and a charger.
  • EFFICIENT: Featuring an efficient impact driver hammer-and-anvil system, the combo kit delivers Pro performance, with 1, 400 in.-Lbs. of max. torque in a lightweight tool that weighs just 2.4 lbs.
  • LIGHTWEIGHT: The included drill features a light but powerful drill motor that provides outstanding drilling production in a tool that weighs just 2.8 lbs..
  • VARIABLE SPEED: Featuring a variable-speed drill that furnishes control for high-speed (0-1, 700 no-load RPM) and high-power (0-450 no-load RPM)..
  • POWER: With a robust impact driver motor, the Bosch GXL18V-26B22 delivers a max. Of 3, 600 BPM for professional power..
Check Stock

Milwaukee 2695-15 M18 Combo 15 tool Kit W/4 Xc Bat

  • 1/2-Inch Drill/Driver In The Cordless Drill Combo Kit Features 283 Units Watts Out, Two Speed Gear Box (0-350/0-1,500), Compact Design (8.25-Inch Long/3.5 Lbs), 1/2-Inch Chuck, Built In Led Light.
  • 1/4-Inch Hex Impact Driver Of The Cordless Tools Combo Kit Provides 1,450 In-Lbs Torque At 2,900 Max Rpm'S And 3,000 Bpm And Is Equipped With A Quick Release Chuck.
  • Circular Saw Features High-Performance Motor (3,700 Rpm'S) Of The Drill/Impact Driver Combo Kit, 5-1/2-Inch 18 Tooth Carbide Blade ( 2-1/8' Cutting Capacity) And Beveling Shoe (50 Degrees).
  • Reciprocating Saw Features High Performance Drivetrain (7/8-Inch Stroke Length And 3,000 Spm), Tool Free Blade Release, Variable-Speed.
Check Stock

Milwaukee M18 Cordless LITHIUM-ION 6-Tool Combo Kit (2696-26)

  • 1/2-Inch Drill/Driver In The Cordless Drill Combo Kit Features 283 Units Watts Out, Two Speed Gear Box (0-350/0-1,500), Compact Design (8.25-Inch Long/3.5 Lbs), 1/2-Inch Chuck, Built In Led Light.
  • 1/4-Inch Hex Impact Driver Of The Cordless Tools Combo Kit Provides 1,450 In-Lbs Torque At 2,900 Max Rpm'S And 3,000 Bpm And Is Equipped With A Quick Release Chuck.
  • Circular Saw Features High-Performance Motor (3,700 Rpm'S) Of The Drill/Impact Driver Combo Kit, 5-1/2-Inch 18 Tooth Carbide Blade ( 2-1/8' Cutting Capacity) And Beveling Shoe (50 Degrees).
  • Reciprocating Saw Features High Performance Drivetrain (7/8-Inch Stroke Length And 3,000 Spm), Tool Free Blade Release, Variable-Speed.
Check Stock

PREXISO 11.5'' Digital Level & WORKPRO 10\ Contour Gauge and 6-Sided Angle Measuring Tool Combo Kit

  • Package 1: PREXISO 11.5'' Digital Level - Accurate to the ±0.1° at 0° and 90° and ±0.2° from -1-89°. Measure slope angles 4 x 90˚ (total 360˚).
  • Package 2: WORKPRO 10" Contour Gauge and 6-Sided Angle Measuring Tool Combo Kit - This 10" contour gauge duplicator and 6-sided angle measuring tool combo are great for duplicate the shape on tiling, wallpapering, laying carpet, laminate flooring, and much more. The combo makes projects easier..
Check Stock