Reviews Hart Miter Saw 4

Metabo HPT MultiVolt 36V Sliding Miter Saw 10-Inch Blade Dual Bevel Includes Battery & Charger C3610DRAQA

  • MULTIVOLT: Miter saw can be powered by a MultiVolt 36 Volt battery (included) or the MultiVolt AC adapter(sold separately).
  • FEATURING: Dual bevel sliding miter saw providing the power and precision a pro demands.
  • INCLUDES: 36 volt miter saw, 4 AH battery and charger.
  • AWARD: Rated Best 10-Inch Miter Saw by Pro Tool Reviews 2020.
  • MITER AND BEVEL: Miter and bevel: 0-60 degree miter angle to the right and 0-55 degree miter angle to the left and also 0-48 degree bevel angle range....
Check Stock

BOSCH CM8S 8-1/2 Inch Single Bevel Sliding Compound Miter Saw Blue

  • CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without....
  • SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece....
  • CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed....
  • PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1 4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive....
Check Stock

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge 18 Inch

  • MAKE ACCURATE CUTS: The DCT | Table Saw Miter Fence with Miter Bar Gauge & Flip Stop offers safety and accuracy when cutting or sanding precise,....
  • USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact....
  • NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts.
  • Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm)....
  • BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip....
  • PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge....
Check Stock

Rockler Clamp-It Corner Clamp Jig - Glass-Filled Polycarbonate Woodworking Clamps - Corner Clamps to Hold Panel Parts Together - Right Angle Clamp for Fastening Work - Woodworking Tools

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8\ x 3/4\ Miter Slot – Fence Accessories

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

THE SMART CUT Aluminum Table Fence 18 ft with Universal Saw Attachment Mounts | For Any Portable Chop or Miter Saw Stand | Compact & Lightweight | Easy Setup Jobsite Table

  • LESS BOARD STRUGGLE: The Smart Cut Aluminum Table Fence universally attaches to any saw or stand (not included) giving you a flush fit to your saw back fence and base. Table sections can be configured left or right of the saw for cutting work pieces of any size. This table eliminates board struggle at the saw and keeps boards on plane for precise, accurate cutting..
  • COMPACT & LIGHTWEIGHT: The aluminum Table Fence is very lightweight, portable, and jobsite tough. Our miter saw accessories are heavy-duty, yet fast and easy to set up and tear down so you can go home at the end of the day. It’s a great addition to your miter saw stand, the table breaks down into (4) 4.5ft sections, it fits easily into your truck bed. Cost, quality, and versatility make this a superior product to other miter saw tables, miter saw fences, and miter saw accessories competitors..
  • SATISFACTION GUARANTEED: Made in the USA and Veteran Owned, we are confident you will love our miter saw products. We are committed to providing the highest level of customer satisfaction. If you are ever unsatisfied, reach out to us directly, and we will do all we can to make it right. Your satisfaction is our #1 priority..
Check Stock

391926-01 391926-00 for Dewalt Miter Saw DW703 DW705 Replacement Power Switch

  • 【PART NUMBER】 391926-01 Replace 391926-00 Miter Saw Power Switch.
  • 【This Trigger Switch】( For Eaton Style) is an over hang Trigger Switch replaces for Dewalt 391926-01, 391926-00. Used in table saws and power tools with higher ratings.
  • 【Features】Switches are commonly replaced parts in power tools. A switch handles all on/off and variable speed functions. They also have a role in electric breaking.
  • they can momentarily reverse electrical polarity. Because switches use mechanical internals, they tend to degrade and wear out over time, eventually requiring replacement. This particular switch comes as a worthy replacement because it offers high quality at a lower price tag..
  • 【Specifications】 Voltage: 125/250V. Amperage: 24A/12A..
  • 【This part is compatible with】Fits DeWalt: DW703 Type 1 10 Inch Compound Miter Saw, DW703 Type 3 10 Inch Compound Miter Saw, DW705S Type 6 12 Inch Compound Miter Saw, DW705S Type 7 12 inch Compound Miter Saw, DW705S Type 8 12 inch Compound Miter Saw, DW705 Type 6 12 Inch Miter Saw, DW705 Type 7 12 Inch Miter Saw, DW705 Type 8 12 Inch Miter Saw, DW706 Type 1 12 Dual Bevel Miter Saw, DW713 10 Miter Saw.
Check Stock

DEWALT Miter Saw, Single Bevel, Compound, 10-Inch, 15-Amp (DWS713)

  • Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops.
  • The mitre saw has a precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right.
  • 2-inch x 6-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 4-inch dimensional lumber at 45 degree.
Check Stock

MUK LUKS womens Pull on Slipper Dark Sapphire X-Large US

  • Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops.
  • The mitre saw has a precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right.
  • 2-inch x 6-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 4-inch dimensional lumber at 45 degree.
Check Stock

4410 4412 4000 3915 5412L 4100DG-09 4405 5412 GTS1031 Carbon Brushes compatible with Bosch Miter Table Saw

  • compatible with: Bosch: 4412 (0601665039) 12" Miter Saw 4412 (0601665039) 12" Miter Saw 4000 (0601476139) Table Saw 4000 (0601476139) Table Saw B3915....
  • compatible with: Bosch: 4212L () 12" Dual-Bevel Upfront Control & Laser Tracking Compound Miter Saw 4212L () 12" Dual-Bevel Upfront Control & Laser....
  • compatible with: Bosch: 4212 (060166F035) Miter Saw 4212 (060166F035) Miter Saw 4410 (060166E139) Miter Saw 4410 (060166E139) Miter Saw 4212L....
  • We have been specializing in the production of carbon brushes for 20 years. Our products are not only supplied to Chinese customers, but also sold to....
Check Stock

Miter Saw Protractor, XUNTOP 7-Inch Aluminum Miter Protractor with Mini Level Gauge Rust Proof Angle Finder Featuring Precision Laser Engraved Scales for Carpentry, Crown Molding, Baseboard, DIY-Black

  • 【Accurate Miter Saw Protractor】Compare with the plastic miter protractor, XUNTOP miter saw protractor can provide accurate angle calculations for the highest precision Single/Miter cutting, beacuse it is made of high quality anodized aluminum alloy steel. And the internal Teflon O-ring mechanism swivels during operation and ensures smooth & precise read on inside/outside corners..
  • 【Easy to Use】This miter saw protractor rotates a full 360 degrees for measuring any odd angles, and it tells you where to set your saw directly for an accurate Miter cut, and Single cut with no calculations. Very easy to transfer an odd angle from piece to piece, making most cutting work much more accurate and reducing hand fitting for making nice clean cuts without guessing at angles and wasting material.
  • 【Easy to Read Numbers】The markings on miter saw protractor is precision laser engraved,and white markings on black background are much easier to read, even without bright light..
  • 【Durable Saw Protractor】This miter angle finder is made of solid CNC-machined anodized aluminum alloy steel with a black anodized finish, and the 1/4-inch thick aluminum alloy is stronger and won't bend like the plastic ones, resistant to scratch for daily use. It feel....
Check Stock

Gohelper Miter Saw Protractor Angle Finder Tool Guide case, 7 inch Aluminum Measuring Miter Gauge Protractor Inside & Outside Corner Angle Finder Protractor for Woodworking, Metal, Crown molding

  • Accurate Measurement: The miter saw protractor angle finder provides two scales: single cut and miter cut, external scale to measure a single cut and internal scale to measure a miter cut, conversion table which allows values of the spring and corner angles being converted into mitre and bevel angles..
  • Exquisite Craftsmanship: The O-ring design makes the saw protractor angle finderrotate full 360 degrees, ensures mitre saw protractors fit the corner smoothly when doing measuring operation, precise read on inside or outside corners. precision laser engraving scale ensure the dial is clear and easy to read..
  • Excellent Material: The miter saw protractor tool is made of aluminum alloy, which has strong wear resistance and corrosion resistance, expand itself service life, 7inch size and lightweight material makes it easy to carry..
  • 4. Wide Applications: the miter saw protractor guide can perform applications, such as measuring external angles, measuring internal angles, and measuring height angles, it is suitable for saw protractor for woodworking, metalworking, miter single cut, miter cut, crown shaped, pipe, and other carpentry applications..
  • Quality Assurance: We have great quality aluminum saw protractor, if you have any questions or problems in the proce....
Check Stock

Mini Cut-off Miter Saw, 110V Mini Benchtop Cut-Off Chop Saw-Adjust Miter Gauge with 2' Blade 1/2' Cuting Depth Miter for Arts Cutting Wood Plastic Metal DIY Working

  • Mini cut-off miter saw fit for cutting soft wood, plastic, aluminum, copper, fiberglass, brass perfect for all your DIY projects..
  • 110V mini benchtop cut-Off chop saw fit to cuts upto 1/2″ thick wood or 1/2″dia metal tube, cuts miter corners from 0° to 45° with adjustable miter guage..
  • Mini miter cut-off chop saw of main parameters: Maximum speed 7800 rpm and 3/8-Inch arbor, 2-Inch blade diameter and 0 .02 inch blade thickness..
  • mini craft miter saw, mini cut off saw, 2 inch chop saw, mini miter table saw, 2 chop saw, power mini miter saw, miniature miter saw, mini bench saw, miniature cut off saw, miniature craft miter saw.(Note:it can only cut softmetal (like brass, aluminum) with thickness less than 3mm, it can not cut hard metal (like stainless steel/iron) and thick metal..
  • 100% satisfactory service, if you have any questions, please feel free to contact us by email ! We will solve it for you in the first time!.
Check Stock