Reviews Harmonic Drive

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

  • Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Package dimension is 4.5 inches width by 5 inches height by 2 inches depth.
Check Stock

Performance Tool W89710 Harmonic Balancer Installer

  • Works on most European and Asian vehicles including BMW, VW, Toyota, Honda, Kia and Hyundai.
  • Services harmonic balancers as well as under drive pulleys and recessed crank threads on Dodge Hemi, GM Gen III/IV, and Ford 4.6 and 5.4 modular engines.
  • Set includes the traditional installer adapters as well as long reach adapters for late model applications.
  • Special adapters make this a complete master harmonic balancer installer set for most car and light truck applications.
  • Heavy-duty forcing screw has internal threads to fit the threaded adapters, Blow molded case keeps set components organized for easy selection.
Check Stock

Yoursme 77080 19mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Removal Holding Spanner for Honda and Acura Engines

  • 【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper....
  • 【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and....
  • 【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while....
  • 【Using of 50mm Tool】Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating....
  • 【Premium Support: 】Our focus on products and customer services is 2nd to none. We provide friendly 1 years’ warranty support, easy-to-reach....
Check Stock

77080 Harmonic Balancer Socket Tool 19mm Fits for Honda Use with 1/2 drive & 50mm Crank Pulley Wrench Holder Crankshaft Pulley Removal Tool Fits for Honda Acura

  • 【Application】19mm Harmonic Balancer Socket used in conjunction with a 1/2-inch drive for Honda engines using 19mm hexagonal pulley damping bolts....
  • 【Function】19mm Harmonic Balancer Socket is suitable for removing the lug nuts from the tightening wheel. 50mm Crankshaft Crank Pulley Wrench....
  • 【Advantages】19mm Harmonic Balancer Socket has thicker walls reduce bending and vibration to provide maximum torque. 50mm Crankshaft Crank Pulley....
  • 【Superior Material】Made of sturdy, heavy-duty steel with black coating, anti-corrosion for professional level reliability and durability. Ensure....
  • 【100% Satisfaction Guarantee】Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products,....
Check Stock

BETOOLL 19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Tool Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • 50mm Crankshaft Pulley Removal Tool: Used to maintain the harmonic damper pulley position and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Using of 50mm Tool: Works with a 1/2 inch breaker bar or ratchet. Small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain..
  • 19mm Harmonic Balancer Socket: BETOOLL socket could be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
  • Using of 19mm Tool: Used with 1/2” square drive. This Harmonic Balancer Socket features a deep counter-weighted design to increase torque, so you could quickly and easily break stubborn bolts loose..
  • Tough and Sturdy: Made of high strength alloy steel,heavy duty and durable.Coated with black paint which prevention corrosion. Backed by a lifetime replacement guarantee..
Check Stock

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

Sunluway for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with Crank Bolts

  • GREAT FITMENT: Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7.
  • HIGH QUALITY: Made of high quality-42CrMo Steel, heavy duty and durable, surface coated with black paint to ensure resistance to corrosion and rust,....
  • NICE DESIGN: Designed to hold the crankshaft pulley while loosening or tightening the centre screw. Needn't to remove radiator or other components to....
  • USE SIMPLLY: To tighten crankshaft pulley by 2 screws (M8 x 1.25) Extend operation needs 1/2" Drive Wrench. Prevent the harmonic damper pulley from....
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Damper Pulley Holding Tool, simply return it for a full refund in 30 days,....
Check Stock

77080 19mm Harmonic Balancer Socket 3 Times Momentum Power of Standard Impact Sockets Fits for Honda Engines

  • COMPATIBILITY: Fits for Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. OAL 89mm, Used with 1/2” square drive..
  • HIGH STANDARD QUALITY: Made of superior heat-treated, impact quality steel, greatly dealing with high impact and absorbing some of the shock by....
  • PERFECT DESIGN: Designed with more than 3 x the mass of standard impact sockets to reduce flex and vibration, delivering maximum torque and more....
  • EASY TO INSTALL: 19mm Harmonic Balancer Socket - a must have tool to install or remove 19mm damper bolts in minutes..
  • 100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this 77080 Harmonic....
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

Harmonic Balancer Socket Tool 77080 19 mm Crank Bolt Socket for Honda 3 Times Momentum Power of Standard Impact Sockets

  • GREAT COMPATIBILITY: OAL 89mm, 1/2" square drive.
  • can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
  • SUPERIOR QUALITY: Made with heat-treated, impact quality-GB 40CR alloy steel which has longevity longer much than other ordinary steel..
  • PERFECT DESIGN: Provide more energy to removing the bolt for designed with more than 3 times the standard socket mass to direct..
  • EASY INSTALLATION: Easy to install and remove, can be perfect to install to your 19mm Hex Pulley Damper Bolt with the 19 mm Harmonic Balancer Socket..
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Balancer Socket Tool, simply return it for a full refund in 30 days, no....
Check Stock

JOYO JF-02 Ultimate Drive Overdrive Guitar Effect Pedal

  • Ultimate Drive Overdrive Guitar Effect Pedal.
  • Hybrid OCD distortion of solid state or vacuum tube tone.
  • Effects of electron tube amplifier and complex harmonic spacious sound.
  • Intermediate between distortion and overdrive, different from the normal diode clipping circuit..
  • Hybrid OCD distortion of solid state or vacuum tube tone, create the tone of a tube amplifier at volume..
  • Soothing and sweet tone & more active redundancy..
  • Effects of electron tube amplifier and complex harmonic spacious sound..
  • Also added High and Low switch to tailor overdrive frequencies to your liking..
  • Powered by: 1 * 6F22 9V battery / DC 9V adapter (neither included).
  • Effect pedal size: Approx. 12 * 6.7 * 5.6cm / 4.7 * 2.6 * 2.2in.
  • Package size: 12.8 * 7.5 * 6cm / 5.0 * 3.0 * 2.4in.
Check Stock

OEMTOOLS 25090 Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Fits Most Late Model Automobiles & Trucks, Forcing Screw Fits a 3/8” Square Drive, Includes 4 Forcing Rods, 6 Piece

  • FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt.
  • Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers.
  • WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995).
  • EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process.
  • INSTRUCTIONS AND STORAGE CASE INCLUDED: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case.
  • Easily take this harmonic balancer puller set from job to job.
  • PRODUCT SPECIFICATIONS: Includes Puller Body, 3-Jaw Puller, (3) Jaw Retaining Pins, (3) Wave Washers, (4) Pressure Screw Adapter Rods (4.
Check Stock

Mofeez 77080 19mm Harmonic Balancer Socket for Honda

  • HIGH QUALITY-----Made of high strength alloy steel,heavy duty and durable.Coated with black paint which prevention corrosion..
  • USE WITH-----Mofeez harmonic balancer socket use with 1/2" drive..
  • USE FOR-----Our heavy duty socket can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications.Also good for....
  • FEATURES-----Thicker wall,reducing flex and vibration to deliver maximum torque..
  • WARRANTY-----18 MONTHS Limited Warranty..
Check Stock