Reviews Harmonic Balancer Bolt Kit

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....
Check Stock

OEMTOOLS 25090 Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Fits Most Late Model Automobiles & Trucks, Forcing Screw Fits a 3/8” Square Drive, Includes 4 Forcing Rods, 6 Piece

  • FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt.
  • Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers.
  • WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995).
  • EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process.
  • INSTRUCTIONS AND STORAGE CASE INCLUDED: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case.
  • Easily take this harmonic balancer puller set from job to job.
  • PRODUCT SPECIFICATIONS: Includes Puller Body, 3-Jaw Puller, (3) Jaw Retaining Pins, (3) Wave Washers, (4) Pressure Screw Adapter Rods (4.
Check Stock

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
  • Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
  • The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

OEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer, Extra Long Forcing Screws for Hard to Reach Balancer Pulleys

  • MANY APPLICATIONS: The forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles.
  • M16 x 2.0 mm (GM), M14 x 1.5 mm (Dodge, Chrysler, and Jeep), M12x 1.75 mm (Dodge Chrysler, and Jeep), and M12 x 1.5 mm (Ford).
  • SAVE TIME AND MONEY: Car repairs can be expensive.
  • By using this harmonic balancer installer, you will be saving over $600.
  • You can also save time with this balancer installation tool by not waiting for repairs at the auto shop.
  • CONVENIENT PACKAGE: All of the pieces in this harmonic balancer installer kit come in one convenient package, making the pieces both easy to find and easy to store.
  • Never worry about losing pieces with this harmonic balancer puller set.
  • EASY TO USE: Assemble the threaded rod nut bearing with the bearing facing away from the hex.
  • Insert the threaded rod through the balancer and fastener into the crankshaft.
  • Use a second wrench to rotate the assembly.
  • EFFECTIVE: The three puller arms have a significant bite to grip and remove pressed-on harmonic balancers.
Check Stock

AUTOAND GM Harmonic Balancer Remover Puller, Automotive Replacement Engine Harmonic Balancer without Tapped Holes, Crank Pulley Puller Compatible with Ford Coyote 5.0

  • [QUICK & SAFE] GM harmonic balancer puller kit is intended to quickly and safely remove harmonic balancers without tapped holes. This tool features a "clip-in" design allowing removal without bolting the puller to the balancer. The harmonic balancer without threaded holes can also be easily removed..
  • [APPLIACABLE VEHICLE] The harmonic balancer puller tool is compatible with GM models: 5.3L, 5.7 LS1, 6.0 LS2, 6.2 LS3, 7.0 L. Compatible with Chrysler, Jeep, Dodge models: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8..
  • [INAPPLICABLE VEHICLES] This tool is not applicable to 1997 or earlier GM LT (5.7L LT1003c4) series engines (with threaded holes), and does not apply to 2018+ Ford 5.0 engines and newer Coyote balancers. Also will not work with the truck pulley. (If you have any issue, please feel free to contact us by email).
  • [EASY TO USE] Lubricate and tighten the pressure screw, after inserting the jaws into the spokes, turn them carefully clockwise to engage the harmonic balancer. Tighten the pressure screw to reach the crankshaft, finally use a wrench or a ratchet to turn the compression screw carefully until the harmonic balancer is removed..
  • [HIGH QUALITY] The harmonic balancer removal tool allows you to complete the work faster and save your time, w....
Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

  • 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
  • Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
  • 【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
  • Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
  • Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Check Stock

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

  • Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Package dimension is 4.5 inches width by 5 inches height by 2 inches depth.
Check Stock

ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

  • [Car Maintenance Made Easy]: When removing harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys, depend on the ABN 13 Piece....
  • [Even Application]: No need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts.
  • [Built to Last]: Steering wheel puller kit bits are hardened and tempered to ensure longevity and strength.
  • Machine precision flywheel puller tool....
  • [Fit for Your Tool Kit]: Wheel puller set includes (1) floating swivel, (2) 5/16 by 4 inch (7.9mm x 101mm) bolts, (2) 1/4 by 3 inch (6.3mm x 76mm)....
  • [Blow-Molded Case]: Steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure....
Check Stock

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

Harmonic Balancer Socket Tool 77080 19 mm Crank Bolt Socket for Honda 3 Times Momentum Power of Standard Impact Sockets

  • GREAT COMPATIBILITY: OAL 89mm, 1/2" square drive.
  • can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
  • SUPERIOR QUALITY: Made with heat-treated, impact quality-GB 40CR alloy steel which has longevity longer much than other ordinary steel..
  • PERFECT DESIGN: Provide more energy to removing the bolt for designed with more than 3 times the standard socket mass to direct..
  • EASY INSTALLATION: Easy to install and remove, can be perfect to install to your 19mm Hex Pulley Damper Bolt with the 19 mm Harmonic Balancer Socket..
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Balancer Socket Tool, simply return it for a full refund in 30 days, no....
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

Dorman 594-006 Harmonic Balancer , Black

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

VQL Harmonic Balancer Steering Wheel Puller Kit (13 Piece) with Blow-Molded Case Use for Removing Harmonic Balancers, Gear Pulleys, Steering Wheels and Crank Shaft Pulleys

  • 【Widely Used】 Harmonic Balancer Steering Wheel Puller Tool are used to removal of harmonic balancers, gear pulleys, steering wheels and crank shaft pulleys. This is a universal type puller.003c/p003e.
  • 【Durable】 13 Piece Harmonic Balancer Steering Wheel Puller Kit are made of high-quality steel, Drop Forged, Heat Treated, this tool set is very durable.003c/p003e.
  • 【Apply Pressure Evenly】 Yoke allows for either 2 or 3-hole application. The harmonic balancer puller allows uniform pressure on the parts, No need to worry about the steering wheel puller and harmonic puller puller kit will damage the auto parts.003c/p003e.
  • 【Package Included】 1* center screw, 1* Floating swivel, 2* 5/16 x 4 bolts, 2* 1/4 x 3 bolts, 3* 1/4 x 2 bolts, 3* 5/16 x 2 bolts and 1* Blow-molded Case.003c/p003e.
  • 【Various Sizes】 Steering wheel pullers has a caster with four slots for using in nearly any configuration. Various sized provides necessary versatility.003c/p003e Buy with confidence. We provide refund and exchange service, if you have any questions, please feel free to contact us.003c/p003e.
Check Stock