Reviews Hardened Steel Nozzle

26PCS 3D Printer Nozzles Kit,MK8 3D Printer Extruder Nozzles Compatible with Creality Ender 3 Ender 3 v2 Ender 3 pro Ender 5 Ender 5 pro CR-10 and so on,3D Printer Nozzle Wrench

  • Wide compatibility : nozzlethe input diameter is 1.75mm, m6 thread, suitable Compatible with 3D printer Makerbot Anet A8, MK8 Reprap Prusa I3,....
  • Storage box : convenient for you to carry and store.
  • Practical wrench : A special wrench suitable for nozzles of MK8, which not only makes the adjustment and replacement of the nozzle easier, but also....
  • Premium material : MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material is....
  • Value for money: package comes with 4 pieces of hardened steel nozzles, 16 pieces brass nozzles, 1 Nozzle Spanner ,5 nozzle cleaning needles, fficient....
Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • [Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle. The hardness is beyond HRC60, can reduce the abrasion to the inner and outer of the nozzle during long time printing, more heat-resistant and more durable than ordinary brass nozzle..
  • [Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible with material such as PLA, ABS to carbon fiber, even PEEK..
  • [High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK....
Check Stock

32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3

  • Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
  • High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
  • Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material....
  • Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
  • Extensive Compatibility: Outer Thread M6，Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • Nozzle Cleaning Kit: you will get 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

  • [Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
  • [High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
  • [High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....
Check Stock

SpeedBlaster® Red - Model 007R Red

  • GRAVITY FEED SAND BLASTER - Unique gravity feed design forces the particles into a replaceable hardened steel mixing chamber & passes through a ceramic nozzle..
  • A POWERFUL BLAST - Operating pressure 60-125 PSI.
  • HIGH PERFORMANCE - Complete with a one piece handle, safety vented tank, alumina ceramic nozzle, and adjustable material control valve that.
  • EASY TO USE - Perfect for all your small to medium size sand blasting jobs!.
  • AMERICAN MADE - Designed, Tested, Manufactured, and Proven in the USA since 1984.
Check Stock

Ultimate Washer UW16-SE1421 1/4 Male NPT Screw Type Surface Cleaner Nozzle 25 Degree 2.0 Orifice Spray Tip

  • This is a set (2pieces) of STAINLESS STEEL 25 Degree Angle High Pressure Spray Nozzles.
  • UNIVERSAL REPLACEMENT Threaded Nozzle for Surface Cleaners.
  • Screw Type Stainless Steel Nozzle with Hardened Insert.
  • Best suitable for 4000PSI @ 4.0GPM (will also work with pressure washers with 2000PSI @ 2.8GPM, 2500PSI @ 3.1GPM, 3000PSI @3.5GPM, 3500PSI @ 3.7GPM OR....
Check Stock

Hardened Steel Nozzle 0.4 mm/ 1.75 mm 3D Printer MK8 Nozzles Tool High Temperature Wear Resistant Compatible with Makerbot Creality CR-10 All Metal Hotend Ender 3/ Ender3 pro Prusa i3 5 Pieces

  • Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy....
  • Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but....
  • High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less....
  • Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also....
  • What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement,....
Check Stock

MIG Nozzle Cleaner, Arc Welding Torch Tip Shroud Reamer For Gas Shielded Welding Torch Accessory

  • High Quality: Made of premium material, 100% brand new, durable to use..
  • Advantage: The ceramic claw opening helps to extend the nozzle and is very effective in cleaning splatters quickly and easily..
  • Easy Operation: Simply insert the hardened steel blade into the mig torch and the rotate spatter-proof nozzle..
  • Easy to Carry: The nozzle reamer is portable and small enough not to take up much space in a toolbox or welding table..
  • Sevice: Enjoy a smooth & worry-free return service within a month! Any questions feel free to contact us..
Check Stock

Creality 8 PCS 3D Printer Hardened Steel MK8 Nozzles Upgraded Tungsten All Metal Extruder Nozzles 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • [Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle.....
  • [Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high....
  • [High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item....
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten....
  • [Parts Included] - Coming with 8 pieces of black different size MK8 nozzles, the size is 0.2mm/0.3mm/0.4mm/0.5mm/0.6mm, sufficient quantity and size....
Check Stock

CANTESCO TD-16 Blue Premium Nozzle Tip Dip, 16 oz Jar

  • Made of high-quality ceramics, strong heat insulation and long service life..
  • Very effective to clean splashes quickly and efficiently..
  • The blades extend the service life of the nozzle and reduce the chance of wire sticking..
  • Easy to use, so you need to insert the hardened steel blade into the blocked nozzle of the MiG torch and turn it..
  • Very practical to carry. You can put this handy tool on the toolbox or welding table..
Check Stock

YuenPau MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

  • Compatibility: Fit with MK10 hotend aluminum cooling block, such as FlashForge Creator Pro \ Creator X \ Dreamer \ finder \ inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S \ Duplicator 4X \ Duplicator i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
  • Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece..
  • Brass material advantage: The heat conductivity of brass is is several times that of stainless steel and hardened steel, It is the most suitable material for extruder nozzle to ensure accurate print temperature..
  • Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
  • Improved Version: An M3 thread hole has been added on the aluminum block to making it suitable for both M3 and M4 thermistor.
Check Stock

Skat Blast S-35-S Small Trigger-Operated Power Gun for Skat Blast Sandblasting Cabinets, Made in USA

  • ...and full-hand trigger let you "feather" the blast for special applications or use "full blast" for heavy rust and paint removal. (More comfortable to hold and more durable than finger control type.) Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life.
  • and has a case-hardened insert for better fit against back side of nozzle..
  • Stainless steel valve stem with a case-hardened steel valve stem guide make this gun the smoothest operating trigger gun on the market. Has 1/4" standard female pipe thread for your air inlet hose at bottom of handle. Your hose from pickup tube slips on power head. Accepts 5/8" ID siphon hose..
  • The S-35 Series Power Gun is used with all trigger-operated Skat Blast Cabinets. Complete with nozzle and air jet installed in gun, two extra steel nozzles, and allen wrench. Max 125 psi. 7-3/4" wide, 6-1/2" high, 1" deep. Made in USA. Patent No. D760,570..
  • Siphon gun requires 4-8 cfm, 3-5 HP air compressor. FOR SIPHON BLASTING ONLY..
Check Stock