Reviews Hard wearing Wiper Cowling

OTC 4676 Windshield Wiper Puller

  • Safely removes wiper arms on a wide variety of foreign and domestic Cars, SUVs, Vans, and Light Trucks.
  • Engineered to ensure no damage will occur to wiper arm hood or cowling during wiper arm removal.
  • Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft to remove the wiper arm.
  • Tool features a throat depth of 1-1/16 inches.
  • foot spacing accomodates wiper shafts up to approximately 5/8 inch diameter.
  • Features a rugged metal frame and forcing screw with rounded tip to engage small depression on windshield washer shaft or loosened nut - keeping the screw centered on the shaft for optimum performance.
Check Stock

DNA Motoring ZTL-Y-0219 Left & Right Factory Style Black Front Outer Windshield Window Wiper Cowl Cover Panel Compatible with 2004-2008 F-150

  • Fitment: Factory Style Outer Windshield window Wiper Cowl Covers are Compatible with 2004-2008 F150..
  • Replaces Part Number: 4L3Z-15022A69-AA , 4L3Z-15022A68-BA.
  • High Performance: Built to Strict Quality Control Standards, Durable Enough for Long-Lasting Performance..
  • Direct Replacement: Designed to Fit Perfectly with Your Existing Cowling Weather Strip.Great for Replacing Worn, Faded or Missing Wiper Cowling End Pieces..
  • Easily to Install: Installs with Provided Hardware, No Need to Replace the Entire Unit..
Check Stock

2Pcs Factory Style Windshield Window Wiper Cowl Cover Panel Compatible with Ford F-150 04-08, Left and Right Side, Matte Black

  • ▶️ These windshield cowls are compatible with Ford F-150 2004-2008..
  • ▶️ Come with [2] brand new windshield cowls, which are great for replacing worn, faded or missing wiper cowling end pieces and also can bring a brilliant appearance to your vehicle..
  • ▶️ It is constructed of sturdy and heat-resistant ABS plastic to ensure a long-lasting performance life in outdoor conditions..
  • ▶️ It is designed to fit perfectly with your existing cowling weather strip and there is no need to replace the entire unit..
  • ▶️ Direct replacement for the part #4L3Z-15022A69-AA 4L3Z-15022A68-BA, easily for the installation without any drilling or modification..
Check Stock

Early Bus Wiper Cowling Rubber End Pieces for 2004-2008 Ford F-150 & 2006-2008

  • 【COMPATIBILITY】Wiper Cowls Set Replacement Parts fit for 2004-2008 Ford F-150 & 2006-2008 Lincoln Mark LT..
  • 【REFERENCE NUMBER】PART NO: 4L3Z-15022A69-AA, 4L3Z-15022A68-BA & 4L3Z15022A69AA, 4L3Z15022A68BA.
  • 【EASY INSTALLATION】Easy to install, requires slot screwdriver and approx 5 minutes time.Replace thebroken or missing windshield wiper cowl..
  • 【PROTECT YOUR CAR】Made of Thermoplastic Elastomers (TPE), highly resistance to damage from sunlight and weathering.No more leaves falling in..
  • 【SAVED OVER $200】Good fit and matched the cowl hood perfectly.You don't need to buy the entire upper cowling to get these 2 end pieces..
Check Stock

OEMTOOLS 25319 Windshield Wiper Arm Puller

  • Will Not Damage Wiper Arm or Hood Cowling During Removal.
  • Designed for professional auto mechanics and heavy duty applications..
Check Stock

Right+Left Outer Windshield Window Front Wiper Cowl Cover Panel Compatible for Ford F-150 2004-2008

  • Front Windshield Window Wiper Cowl Cover Insert Trim Panels is a direct replacement for Ford 2004-2008 F-150.
  • Direct replace Part Number:4L3Z-15022A68-BA, 4L3Z-15022A69-AA.
  • Constructed from Durable ABS plastics with upgraded UV protection to prevent fadingc.
  • It is designed to fit perfectly with your existing cowling weather strip and there is no need to replace the entire unit.
  • The Passenger & Driver Side Outer Windshield Panels,Easy installation, professional installation recommended.
Check Stock

Replacement for 2008-2012 Ford Escape Rear Wiper Arm and Blade OE:8L8Z17526-C

  • Fit For: Replacement for 2008-2012 Ford Escape , 2008-2011 Mazda Tribute.
  • Replacement OEM: 8L8Z17526-C 100% New rear wiper arm with blade kit.
  • Imported Materials: Rubber strip's surface has undergone three special treatments, high definition, quiet, wear-resistant, Prevent cracking..
  • Strict Craftsmanship: Hard-molded frame with steel insert for additional strength..
  • ★ Guarantee ★ OTUAYAUTO Rear wiper kit provides 60-Day return refund and 1-Year quality warranty.
Check Stock

MotoAlliance EVOLUTION 12' UTV Wiper Kit - Hard Coated, Polycarbonate Windshield

  • Use with flat, hard-coated polycarbonate windshields ONLY.
  • Integrated ON/OFF switch on back of 12V, self-contained motor.
  • 90 degree wiper action with self-parking feature.
  • Includes: Motor, wiper blade, wiper arm, 12 foot harness, installation instructions.
Check Stock

Bosch 15' Clear Advantage Beam Wiper Blade (2 Pack)

  • Compatible: Wiper trim cover fit for Jeep Wrangler JL JLU & Gladiator JT 2018 2019 2020 2021.
  • Package: 2* Front window windshield wiper arm blade trim, 1* rear window windshield wiper arm blade trim.
  • Excellent Appearance: The window windshield wiper arm add a variety of colors to your car, while also protecting your car from nails, keys, small stones while driving, covering existing scratches, wiper arm paint, loss of gloss, etc. Exterior Problems.
  • Easy to Install: The window windshield wiper arm just stick on the wiper arm with the included 3M glue, no other tools required, and it can be done in minutes.
  • Material: The window windshield wiper arm made of high-quality ABS plastic material, the surface is polished.
  • wear-resistant, corrosion-resistant, high-temperature resistant, flexible and stable, long service life.
Check Stock

Kemimoto UTV Windshield Wiper Kit Hand Operated Manual Windshield Wiper for Hard Coated Or Glass Windshields Compatible with RZR Ranger General Maverick X3 Commander Defender Pro Golf Cart

  • Universal UTV windshield wiper kit will keep a clearer view when the mud gets splashed up or rain while you go out for a race or venture outside..
  • UTV windshield wiper kit and Golf Cart windshield wipers size: 16" Rubber Blade, 18" from the center for the handle to the end of the wiper on most....
  • Manual wiper kit replaces most manufacturers attaching straps. Will not rust or rattle, mounts to Hard Coated Polycarbonate or Glass Windshields..
  • Hand operated winshield wiper with the precision-tensioned steel spring, utv windshield wiper can uniform pressure along the entire blade length..
  • UTV manual windshied wiper can be replaced free of charge within one year, you may need to drill 1/2 inch hole in your windshield for mounting..
Check Stock

Qarmar 12 Volt Electric Windshield Wiper Motor Kit Fits Hard Coated Or Glass Windshields, UTV Windshields, 110 Degree Wipe Size: Arm: 350mm Blade:400mm

  • √- This motor w/ 110 Degree wiper action, Produced in strict accordance with the original product standards.
  • √- Package: 1 x 12V Electric Motor, 1 x Wiper Arm, 1 x Wiper Blade, 1x Professional Intallation Instruction. Make your installation easier..
  • √- This motor wiper kit used for flat, hard-coated polycarbonate windshields or glass windshields.
  • √- ON/OFF switch on the back of 12V Electric Motor, You can control your wiper sweep..
  • √- Please check part number before ordering it.Any question, please contact us on Q&A section or email us..
Check Stock

Xislet UTV Hand Operated Windshield Wiper Compatible with Polaris Ranger RZR Can Am Kawasaki Honda Pioneer Golf Cart Manual Windshield Wiper Blades Assembly Windshield Kit Instruction Included

  • UTV Hand Operated Wiper help to keep a clear view of the trail ahead when the mud gets splashed up or if it starts to rain.
  • Great range utv manual winshield wiper, 16" Blade 18" from the center for the handle to the end of the wiper mounts to UTV / SxS windshields.
  • Uniform pressure along the entire blade length applied by precision-tensioned steel spring, Pre-Installed adapters and easy to follow instructions for....
  • Improved airflow aerodynamics, boneless screen wiper free of scratches noise and friction.
  • FREE 1 wiper blade to spare, same fits Hard Coated Polycarbonate Windshields or Glass Windshields for most UTV'S, You must drill a 1/2" hole in your....
Check Stock

Compact Boot Scraper Brush and Wiper | Sports Shoe and Cleat Cleaner

  • FREESTANDING BOOT WIPER – Standing at 3ft (0/9m) tall, this compact boot scraper has been manufactured to provide maximum shoe cleaning while also saving space. Due to its self-weighted design, the standalone boot cleaner doesn’t need bolting into the ground..
  • HANDLED SPORTS SHOE SCRAPER – For optimum control and comfort, the compact boot wiper features soft grip handles. These extra supple handles offer stability to the cleat scraper when vigorously cleaning sports or industrial footwear..
  • STRONG STEEL MANUFACTURING – This metal boot wiping device has been made from strong and robust steel, finished in a black powder coating for durability and weather protection. The weatherproof boot cleaners can be used in indoor or outdoor environments..
  • HARD BRISTLED BOOT CLEANING BRUSHES – Coming equipped with highly effective boot wiper brushes, the shoe wiper quickly and effectively removes dirt. The densely bristled brushes provide a comprehensive clean to all footwear it’s applied to..
  • EASY TO ASSEMBLE – Suitable for sports clubs of all standards, leisure centres, schools, home, farming/agricultural, warehouse and industrial use, the footwear wiper and scraper is easy to set up and doesn’t take up a huge amount of space in your facility..
Check Stock