Reviews Hangkai 5hp Outboard Motor

2 Stroke 3.5HP Outboard Motor, 49CC 40cm Short Shaft Outboard Motor Boat Engine with Water Cooling CDI System for Inflatable Boat, Kayak, Canoe, Fishing Boat

  • Fitment: The outboard motor propeller is especially designed for Hangkai 3.5HP..
  • Excellent Quality: Made of high quality CNC aluminum material, durable and practical..
  • Light weight and portable to carry, stable characteristics, high reliability..
  • Easy and convenient to install, directly replace the old or broken one..
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

Suuonee Boat Motor Propeller, 7 1/4 5-A 3 Blades Aluminum Boat Propeller Outboard Motor for Hangkai 3.5HP

  • Fitment: 7 1/4 5-A 3 Blades Aluminum Propeller, Especially designed for Hangkai 3.5HP..
  • Applied High Quality Material: Made of high quality CNC aluminum material, fine lacquering, durable and practical. Stable characteristics, high reliability..
  • Easy and convenient to install, directly replace the old or broken one. Light weight and portable to carry..
  • Perfectly Match: Produced according to original standards level, high accuracy, this Outboard Motor Propeller will perfectly match with your Hangkai 3.5HP..
  • Quality Guarantee: We provide 24-month worry free warranty, please feel free to contact us if you have any questions after received our products..
Check Stock

Recoil Pull Starter for 2 Stroke Outboard Motor 2hp 3.5hp Hangkai Boat Engine

  • Fits two-stroke outboard motor 2hp 3.5hp hangkai boat engine..
  • Package includes: 1 pull starter + 1 pawl.
Check Stock

Recoil Pull Starter for 2 Stroke Outboard Motor 2hp 3.5hp Hangkai Boat Engine

  • Fits two-stroke outboard motor 2hp 3.5hp hangkai boat engine..
  • Package includes: 1 pull starter + 1 pawl.
Check Stock

WINGOGO Water Pump Impeller 6E0-44352-00 6E0-44352-003 Replacement for Yamaha Outboard 4 5 6 HP F4 F6 Boat Motor Engine Parts Sierra 18-3073 6E0-44352-00-00 6EO-44352-00 47-96305M

  • This Water Pump Impeller fits Yamaha Outboard Motor OEM P/N 6E0-44352-00-00 Sierra 18-3073. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure..
  • Replacement for Yamaha Outboard 4HP 5HP 6HP Mercury Mariner 4A 5C Boat Motors Engine Cooling System. More Detailed Information Please See Description Below..
  • Water pump impeller dimensions measured that shaft size 11.0 mm, overall diameter 40.0 mm, thickness 12.6 mm, Blades 6. Water pump impeller is made with neoprene and hardened nylon as pictures showed, Please see the pictures..
  • Compatible with the outboards boat motor Mercury Mariner 96305M/47-96305M Sierra Marine 18-3073 Mallory Marine 9-45611 GLM 89860 SEI Marine 96-499-03B. This Impeller Makes Repair and Maintenance of Water Pumps Easy..
  • To ensure this Impeller is suitable for your boat motor, It is VERY IMPORTANT to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not comfirmed this Water Pump Impeller fits Your Outboard Boat Motor or not. We’r....
Check Stock

Propeller, Aluminum Alloy Propeller 7.8×8 for Tohatsu for Nissan for Mercury Outboard 4HP 5HP 6HP

  • 100% brand new aftermarket Outboard Propeller, Suitable for Tohatsu for Nissan for Mercury Outboard 4HP 5HP 6HP.
  • Made of materials aluminum alloy material, flexible and high reliability.
  • This is a durable marine propellers with good performing.
  • Original standard, directly replace your old one or broken one.
Check Stock

Co-parts Recoil Pull Starter for 2 Stroke Outboard Motor 2hp 3.5hp Hangkai Boat Engine

  • Fits two-stroke outboard motor 2hp 3.5hp hangkai boat engine..
  • Package includes: 1 pull starter + 1 pawl.
Check Stock

Water Pump Impeller 369-65021-1 47-16154-3 18-3098 for Mercury Sierra Tohatsu 2HP 2.5HP 3.5HP 4HP 5HP 6HP

  • Water motor impeller have 6 blades.Height:14.30mm,External Impeller Overall Diameter:33.58mm,Internal Shaft Insert Diameter:10.25mm..
  • This aftermarket impeller replaces Mercury outboard motor part #47-16154-3,Tohatsu outboard motor part 369-65021-1, impeller 18-3098..
  • Water pump impeller are 100% brand new and don't used or rebuilt..
  • Similar in design to stock OEM units and require only simple hand tools for installation.Direct replacement,OE level quality and durability..
  • Water pump impeller 100% compatible with OE parts and passed TS16949 certified.Fits for Mercury/Mariner (4-STROKE) Carb 2HP 2.5HP 3HP,Mercury/Mariner (2-STROKE) 4HP 5HP,6HP..
Check Stock

Boat Motor Propeller, 7 1/4 5-A 3 Blades Aluminum Propeller Boat Outboard Motor for Hangkai 3.5HP

  • Perfect Fit: Perfectly suitable for Hangkai 3.5HP, please check the product title or description make sure it fits for you..
  • Premium Quality: This Motor Propeller is made of high quality CNC aluminum material, durable and practical..
  • Easy to use: Light weight and portable to carry, it is perfect spare replacement to your old or broken one..
  • Easy to Install: This product is made with the original data, direct installation does not need to be modified, convenient and save your time..
  • Package list: 1 * Outboard Motor Propeller..
Check Stock

WINGOGO 19210-881-A02 Water Pump Impeller Replacement for Honda Outboard 5 7.5 8 10 HP Boat Motor Engine Parts Replace Sierra 18-3245 19210-881-A01 19210-881-003

  • Water Pump Impeller for Honda Outboard OEM P/N 19210-881-003 19210-881-A01 19210-881-A02 Sierra 18-3245. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure..
  • Water Pump impeller replacement for 5HP 7.5HP 8HP 10HP Honda Outboard Boat Motors Engine Cooling System. More Detailed Information Please See Description Below..
  • Water pump impeller dimensions measured that shaft size 14.2 mm, overall diameter 41.0 mm, thickness 23.7 mm, Blades 8. Water pump impeller is made with neoprene and metal alloy as pictures showed, Please see the pictures..
  • This water pump impeller makes repair and maintenance of water pumps easy. Professional installation is suggestion. Compatible with Sierra Marine 18-3245, Mallory Marine 9-45100, CEF 500327..
  • To find the right water pump impeller for your outboard,it is VERY IMPORTANT to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not sure, We're pleasure to help you..
Check Stock

SUNGZE Mercury Propeller 7.8x8 for Outboard 2-Stroke 5HP 12 Tooth/Boat Outboard Propeller 7.8 * 8 for Tohatsu/Nissan Engine 4HP 5HP 6HP

  • Diameter(in.): 7.8", Pitch(in.): 8", Blades: 3, 12 Spline Tooth.
  • Fit Mercury/Mariner Outboard Engines Prop 5HP/Tohatsu Propeller Engine 4HP 5HP 6HP.
  • Fit Mercury Outboard Part Number: 48-812950A02.
  • Tohatsu:3R1-W64516-0 (IMPT: check OEM part number before purchase!!).
  • This propeller is after market product. Diameter and Pitch are identical to original OEM ones. We guarantee the performance and quality..
  • Free return is accepted, Please feel free to buy the propeller.
Check Stock

YoHa Boat Engine Safety Kill Stop Switch Lanyard Emergency Cut Off Cord for Yamaha Tohatsu Outboard Motors

  • ⛴This is a engine stop safety lanyard tegher only,Clip-on style,Length of safety lanyard (red one):55 in.
  • ⛴Fits and replace all Yamaha /Tohatsu Outboard motors and all chinese brands of outboards (Parsun,Hidea,Yamabisi ,Hangkai,Powertec).
  • ⛴Used to cut off the power/ignition of the outboard engine.Also fit Chinese outboard engine brands: Parsun, Powertec, Seatec, Hidea Etc..
  • ⛴HIGH QUALITY - The extension length is 55 In, with reinforced nylon fiber in the middle, and the tensile strength is more than 100LB..
  • ⛴OUR GUARANTEE - 12-month service support-REPLACEMENT or FULL REFUND for defective item or dissatisfied one, no hassle to return.Order now without....
Check Stock