Reviews Hand Tap Sets

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • ...s and dies are cutting tools used to create threads on components such as screws, bolts, nuts and to create a threaded hole to screw components into..
  • A tap is a threaded tool that cuts or forms threads in the female portion of a mating pair. Therefore, a tap will create threads in the inside of a hole. On the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
  • Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
  • Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for thre....
Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

  • Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the li....
Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

  • Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do wan....
Check Stock

Thread Forming Tap Bttm 1/4-20 Uncoated

  • Price For: Each Tap Dimension Type: Inch Tap Style: Thread Forming Number of Pieces: 1 Thread Direction: Right Hand Tap Finish: Uncoated Item: Tap Number of Flutes: 0 Standards: ANSI Tap Grouping: Tap List Number: 5502 Shank Dia.: 0.255" Thread Length: 5/8" Overall Length: 2-1/2" Tap Thread Size: 1/4"-20 Tap Thread Type: UNC.
  • Tap Material: Vanadium High Speed Steel Tap Chamfer: Bottoming Pitch Diameter Limit: H4 Country of Origin (subject to change): United States.
Check Stock

IRWIN Tools Metric Tap and Hex Die Set, 41-Piece (26317)

  • We're working with a variety of tradesmen to solve endless fastening challenges: Irwin Hanson Taps and Dies are the answer. Whether creating new tools from raw steel or repairing damaged and worn threads, achieving a precise fit is essential.
  • Irwin Industrial Tools sets the standard for delivering quality every step of the way in your threading applications.
  • TR-88 adjustable handle tap wrench, TR-73 two-in-one tap wrench, TR-50 2-in-1 tap wrench.
  • 18 leaf standard thread pitch gauge and screwdriver.
Check Stock

Xenoblade Chronicles: Definitive Edition (Nintendo Switch)

  • Discover the origins of Shulk as he and his companions clash against a seemingly-unstoppable mechanical menace.
  • wield a future-seeing blade, chain together attacks and carefully position your party members in strategic, real-time combat as you journey across a massive world.
  • During an attack from the mechanical invaders known as the Mechon, Shulk discovers that he can tap into the full power of a mysterious blade known as the Monado.
  • with the mighty Monado in hand, Shulk sets out to defeat the Mechon once and for all.
  • In addition to the Mechon, you'll run into wildlife that ranges from docile to deadly.
  • keep an eye on what attracts monsters' attention to avoid unwanted conflict...or try your hand at bringing down an ultra-powerful Unique Monster.
  • Upgrade your party as you progress through the adventure by selecting equipment, enhancing weapon skills and using benefit-granting gems.
  • put your dependable companions to work by filling the party gauge to trigger a Chain Attack and attack enemies in quick succession.
Check Stock

BOSCH BDT1032 10-32 Plug Tap and No 21 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

BOSCH BDT632 6-32 Plug Tap and No 36 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

BOSCH BDT1024 10-24 Plug Tap and No. 25 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

BOSCH BDT516F18 5/16-18 Plug Tap and Size F Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

R134A Self-Sealing Can Tap with Right Hand Thread, R134A Valve Tool Bottle Opener with 1/2" Female R-H Thread and 1/4’’ SAE Male Connector, Fits for R134A Automotive Air Conditioning Charging

  • 【COMPATIBILITY】 -- This R134A self-sealing dispensing valve bottle opener fits for a self sealing 1/2" right hand thread for use with most R134A self-sealing/reusable designed cans. Please note there are two kinds for self-sealing can taps, R134A and R1234YF can tap, R134A self-sealing can tap with right hand threaded, but R1234YF self-sealing can tap with left hand threaded. Please check your can before purchase..
  • 【THREAD 】 -- R134A valve can tap connecting thread 1/4’’ SAE Male, interface thread 1/2’’ right hand female thread..
  • 【EASY INSTALLATION】 -- Aupoko R134A self-sealing valve can tap is designed with safety check valve, and easy to open R134a self-sealing can with valve to turn off to reserve for future use..
  • 【PREMIUM QUALITY】 -- The R134A self sealing can adapter is made of aluminum alloy with heavy-duty construction, with gasket protected to prevent leaks for durable use..
  • 【1 YEAR WARRANTY】 -- Order R134A self sealing can tap from Aupoko, we offer 1 YEAR WARRANTY, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time..
Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
  • total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

Century Drill & Tool 93201 1/8-27 NPT Tap and 21/64' Drill Combo Pack

  • Tap and drill Combo pack offers correct drill size for the tap in one convenient package.
  • Tap offers precision cut threads, accurately formed for consistent, exact threading.
  • Tap is heat treated and tempered for file hard threads, and longer, useful life.
  • Tap designed for hand cutting applications.
  • Drill bit made of premium grade high speed steel.
Check Stock