Reviews Hand Crimp Tools

Wire Crimper Tool Qibaok Ratcheting Insulated Wire Terminal Connectors Crimping Tool for AWG20-10

  • CRIMPING WIRE SIZE AWG20-10:Steel jaw contains color-coded wire size markings for red (20-16 AWG), blue (16-14 AWG), and yellow (12-10 AWG) terminals..
  • HIGH QUALITY MATERIAL:This Wire crimping plier kit is made of high quality Alloy steel. It is a high strength hand tools for your home improvement..
  • RATCHETING DESIGN:There is a ratcheting mechanism design for this Insulated terminals crimping tool, one-hand operation could make a perfect crimp. And you can take less strength..
  • DOUBLE CRIMPING DIE:Double crimping die creates a secure crimp that resists pull-out.Ratcheting function allows you to secure a wire connector in the die before inserting the stripped wire into the barrel..
  • QUICK RELEASE LEVER:Quick release lever frees the crimper jaws in any position and when double crimp is complete, acts as a built-in safety measure that can open the handles whenever tool is jammed or stuck..
Check Stock

JOOKKI Fishing pliers Hand Crimper Tools fishing leaders kit ,Braid Cutters Hook Remover Fish Holder,Saltwater with Resistant Teflon Coating

  • 【Orrosion-Resistant Aluminum】resistant The titanium coated stainless steel Hand Crimper Tools .saltwater fishing pliers advanced surface coating....
  • 【Single barrel sleeve】This hand crimper crimps from 1.4mm smallest to 3.2mm largest copper / aluminum sleeves. (100 pcs free copper single barrel....
  • 【Firmly Crimp】Six little teeth that individual pressure points on the crimp make sure that crimps are tight and secure.fishing leaders kit.
  • 【Fishing Pliers Non-slip】The ergonomic textured rubber handle provides . slip resistant,comfort and reduce hand fatigue. It's easy to smash the....
  • 【Thicker stainless steel material】Braid cutters hook remover fish holder thicker material than ordinary fishing tongs, unlimited times individual....
Check Stock

SharkBite PEX Crimp Ring Removal Tool, 1/2, 3/4 and 1 Inch Copper Crimp Rings, Orange Handles, Plumbing Fittings, 23055

  • SHARKBITE CRIMP RING REMOVAL TOOL: This SharkBite plumbing tool removes copper crimp rings from brass or poly crimp connections for fittings to be reused.
  • has 200 lbs of crimping force and features a 6 inch handle.
  • COMPATIBILITY: This plumbing disconnect tool works with 1/2 inch, 3/4 inch, and 1 inch copper crimp rings.
  • EASY TO USE: This intuitive SharkBite crimp ring removal tool allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Olsa Tools Ratcheting Wire Crimper | Crimp Tool for Wire Connectors, Butt Connectors, Spade Connectors and Insulated Electrical Connectors | Wire Terminal Crimping Tool | Professional Terminal Crimper

  • ★ PROFESSIONAL CRIMPING TOOL - This high-leverage crimper tool delivers reliable crimps every time. The tool automatically releases when the proper amount of force has been applied, ensuring every crimp is consistent..
  • ★ EASIER CRIMPING - Featuring a dual-lever design, the crimper amplifies your crimping force, easing strain on hands and ensuring an extra strong connection. Works with color-coded red, blue, and yellow terminals for 22–10 AWG wires..
  • ★ RATCHETING ACTION - The ratcheting action allows you to pause mid-crimp to get a better grip and will release automatically once the crimp is complete. It also conveniently enables you to secure a wire connector in the jaw before inserting the stripped wire into the barrel..
  • ★ ERGONOMIC HANDLES - These large, non-slip handles are designed to ensure a strong and comfortable grip. Compared to the cheap crimpers that usually come bundled with a wire terminal set, this tool is way easier on your hands, and won't leave your hands sore at the end of the day..
  • ★ OLSA TOOLS TRUST - Our deep commitment to quality is the reason why tool fanatics like you keep coming back to us for more. All hand tools from Olsa Tools are backed by a limited lifetime warranty that protects your investment against any manuf....
Check Stock

SharkBite 1-1/4 to 2 Inch PEX Crimp Tool, 24675

  • Capability: IWS-FA PEX Crimp Tool Kit works with 4 sizes of PEX tubing - 3/8-in., 1/2-in., 3/4-in., 1-in. (The tool itself) and includes a Decrimping Tool (for crimp ring removal) -all in a compact and durable carrying case. Compatible with all types of PEX copper crimp rings and crimp style PEX fittings.
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp style PEX fittings (F1807/F877 or F2159 standards respectively).All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, Zurn, etc..
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Crimp Ring Removal Tool: Allows PEX fittings to be used more than once. It is designed to remove copper crimp rings with gentle action that will not damage fittings. The easy dial setting adjusts for crimp ring sizes. Compatible with brass and PPSU fittings.
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked ....
Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

  • Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
  • Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
  • Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Terminal Crimper： IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..
Check Stock

Zhushan Spark Plug Wire Crimping Tool Kit, Ratchet Spark Plug Crimper Diameter 8.5mm for Crimping and Stripping Plug, 24PCS 180 °/90 °/Straight Spark Plug Coil Terminals and 24PCS Terminals Boots

  • 【Spark Plug Crimp Tools】Spark Plug Crimp Tools are made of high quality steel, hardened and durable.
  • crimp spark plug wire terminals and strip 8.5mm spark plug wires, spark plug wire crimp tools are suitable for most types of connections.
  • 【Crimp Tool Kit Includes】1 x spark plug crimping tool ,180, 90 and 180 degree spark plug coil terminals with boots,8 of each type.
  • 【Adjustable Crimping Force】The tool is equipped with a star wheel, built-in thickened ratchet automatically adjusts to the appropriate to ensure proper crimping force. The quick release lever allows the crimping jaws to be opened at any position.
  • 【Spark Plug Coil Terminals】Spark plug coil terminals for 8mm wire. They are made of high-quality brass for good electrical conductivity, and the black rubber boots protect the terminals from dust and moisture.
  • 【Appication】Professional insulated wire terminal ratchet crimping tool can be used for home appliance repair, home circuit repair, car circuit connection, and everything about circuit connection.
Check Stock

IDEAL Industries, Inc. 30-495 FT-45 Feed-Thru Modular Plug Crimp Tool for CAT5e, CAT6, CAT6A RJ-45 Connectors, 5 1/2', 1 Crimper

  • MODULAR PLUG CRIMP TOOL: FT-45 is a simple, compact and highly effective modular plug crimp tool for installers and techs to terminate RJ-45 connectors on to CAT5e, CAT6 or CAT6A twisted pair cable..
  • COMPATIBILITY: This tool works with both IDEAL Feed-Thru Modular plugs and standard modular plugs. Feed-Thru plugs allow the individual conductors to "feed-thru" the end-face of the connector and to verify the wires prior to crimping connector..
  • PRECISE TERMINATION: During crimping, the FT-45 crimp tool cleanly shears the excess conductors and leaves a smooth finish at the end face of the Feed-Thru connector. This minimizes accidental shorting of conductors or inadvertent contact in plug jacks..
  • VERSATILITY: FT-45 is designed to crimp IDEAL Feed-Thru, standard and shielded RJ-45 connectors for CAT5e, CAT6 and CAT6A cables. It is compatible with many non-IDEAL connectors as well. One tool covers current and future twisted pair applications..
  • SPECIFICATIONS: This patented tool requires only 1/3 to 1/2 the hand force as compared to traditional tools to crimp the connector. The crimping tool is 5 ½ in long and weighs approx. 1/2lb. It easily fits in your pocket and lightens the tool bag load..
Check Stock

RJ45 Crimp Tool for Pass through and legacy connectorsProfessional High Performance Crimper Tool by Ethernet Connector for pass through and legacy connectors Bonus CAT6 Connector 20 Pack

  • FAST, RELIABLE modular-crimp connection for data and voice-over applications. Create clean, flush trim on RJ11/12 and RJ45 extended copper with our precision ground crimping dies??Ratcheted, high leverage and stable platform for consistent, repeatable terminations,Compatible with RJ45 Pass through connectors and regular RJ45 connectors.
  • VERSATILE electronics tool lets you cut, strip and crimp Ethernet and telephone cable. Compatible with all RJ45 CAT6/7 connectors (including shielded), RJ45 CAT5E connectors, and RJ11/12 connectors (not AMP). HARDENED STEEL construction is durable and delivers more torque during the crimping cycle. Die head assembly provides 360 degrees of connector support for terminating modular plugs on stranded or solid cable..
  • These RJ45 crimpers / crimp tool’s blade guard on cutting and stripping knives reduces risk of injury and helps maintain razor sharpness. Textured handle grips reduce hand fatigue and prevent slipping during cutting, stripping and crimping..
  • Long-lasting durability and easy use PETECHTOOL RJ45 Wire Crimping Tool is made of professional-grade heavy-duty steel so it delivers exceptional torque without bending. Expanded surface area on contact drivers delivers full uniform crimp force for fast, accurate ....
Check Stock

Morris Products 12034 Piggy Back Disconnect Double Crimp Nylon Fully Insulated Blue 16-14 Wire Size 0.032 X0.250 NEMA Tab Pack of 100

  • HIGH-STRENGTH CONSTRUCTION: Each nylon fully insulated double crimp piggy back disconnect in this pack of 100 is manufactured from high-strength brass and electro-tin plated for corrosion resistance..
  • COLOR CODED: Enhance identification with these nylon fully insulated double crimp piggy back disconnects that are color coded in red or blue and available with 16-14 or 22-16 wire sizes..
  • EASY ENTRY: The nylon insulation of these nylon fully insulated double crimp piggy back disconnects help to eliminate strand hang up, ultimately increasing crimping rates and offering mechanical strain relief..
  • BULK PACK OF FEMALE DISCONNECTS: Easily stock up on all the tools you need for residential or commercial electrical jobs with this 100 pack of nylon fully insulated double crimp piggy back disconnects equipped with a butted seam on the terminal barrel..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

IWISS Pex Crimping Tool 1/2-inch & 3/4-inch Copper Ring Heavy Duty Dual Size c/w Go/No-Go Gauge Meets ASTM F1807

  • Capability: IWS-1234P PEX Crimp Tool Kit works with 2 sizes of PEX tubing-1/2-inch and....
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp s....
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate t....
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked for cor....
  • Innovation: Tool includes a gadget helps to reshape the deformed 3/4” rings and cinch rings a little bit smaller to avoid rings from slipping off....
Check Stock

Pandahall 1Set Red Steel Micro Tube Beads Crimper Crimping Pliers Wire Cutter Jewelry Making Tools 5x3.2 Inch

  • Package Included 1Set 45# Steel Jewelry Tools Crimper Pliers for Crimp Beads, Red Color.
  • Size: about 12.8cm long, 8.3cm wide, 0.9cm thick.(5x3.2x0.35 Inch).
  • Plier Design: These Pliers have a comfort handle designed for long term use. The actual pliers are designed to crimp the beads correctly for a longer....
  • Usage: This tool can be used to crimp beads and tube beads with the sizes about 2mm-5mm. Use them to crimp beading wire, beading chain, illusion cord....
  • A crimping tool is specifically designed to squeeze closed crimps. Crimps that are closed by using crimping pliers will give smaller, rounder and....
Check Stock

Hydraulic Cable Crimper and Swage Tool. Great for Crimping Battery Lugs, Large Electric Cables or Swaging Stainless Steel Cable/Rope.

  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we always accept returns in the first 45 days. Easily make a wire rail fence around the deck, yard, or install new rigging in your boat. Anytime you're installing new steel cable this does the job with less effort..
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this tool generates. Imagine trying to crimp a battery terminal under the hood with one of those. Trust us this is better..
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little effort to crimp. During our testing we had a lot of over-crimping. It should never feel like the crimp has to be forced. Especially important on the 00 electric or the 3/16th stainless.....
Check Stock