SmallRig Full Camera Cage for Sony Alpha 7R V / Alpha 7 IV / A7R IV / Alpha 7 S III / Alpha 1 - 3667B
- For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V..
- Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment.
- the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428..
- Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV.
Check StockNICEYRIG Camera Cage for Sony A7III/ A7RIII/ A7IV/ A7RIV/ A7SIII/ A7SII/ A7RII/ A7II/ A9, with M6 Thread Rosette NATO Rail Cold Shoe - 172
- This camera cage is compatible with camera A7 IV/ A7 III/ A7R IV/ A7R III/ A7S III/ A7S II/ A7R II/ A7 II/ A9 to prevent damaging. SD card slot, battery compartment, and all camera controls are accessed..
- The built-in cold shoe on the top allows to attach articulating arm, EVF mount, Rode Video microphone, monitor, etc..
- Rosette at right side is provided to mount compatible with ARRI rosette handgrip for handheld shooting..
- A NATO rail is also at left side to mount nato handle and other NATO compatible accessories quick release..
- The plate at the bottom of the cage enables you to attach an optional Raiser Block, applicable arca swiss compatible with manfrotto plate..
Check StockMindShift Gear BackLight Elite 45L Camera Backpack for DSLR, Mirrorless, Photography and Video
- Fits Nikon D3S attached to 70–200mm f/2.8, SB-910 Speedlight, 105mm f/2.8 Macro, Sigma 35mm f/1.4 ART, 50 f/1.4, Filter Nest Mini, 24–70mm f/2.8, 14–24mm f/2.8 or Sony A7R II attached to 24–70mm f/2.8 GM, GoPro Hero 5, DJI Mavic Pro, Mavic Controller, Filter Nest Mini, A7R II attached to 16–35mm f/4, 70–200mm f/2.8 GM, 90mm f/2.8 Macro.
- Storm proof construction with YKK AquaGuard zippers and waterproof/tearproof Sailcloth.
- Superior Fit: Robust lumbar padding, hip-hugging waist belt, quick-dry back panel, and foam ridges for increased ventilation.
- Back and top panel access to all of your camera gear, allowing you to work out of your bag without getting your harness dirty or wet.
- Exterior Dimensions (travel mode): 13” W x 23.5” H x 8” D (33 x 59.7 x 20.3 cm), Camera Compartment: 11.4” W x 19.3” H x 6.8” D (29 x 49 x 17.3 cm), Laptop Pocket: 11.2” W x 16.1” H x 1”D (28.5 x 41 x 2.5 cm), Tablet: 10.6” W x 10.2” H x 0.6” D (27 x 26 x 1.5 cm), Weight: 3.9–7.0 lbs. (1.8–3.2 kg), Volume: 45 Liters, (Travel mode denotes waist belt and top pocket removed with an empty front pocket except for a laptop).
Check StockIRWIN Tools VISE-GRIP Locking Pliers, Original, Straight Jaw, 7-inch (302L3)
Check StockUpgraded 500W D500EPM-00 DPS-500AB-49A Power Supply Compatible with Dell Optiplex 7080MT 7070MT 7060MT 3050MT G5-5090 3050 3650 3670 3671 5090 5060 3260 3681 XPS 8940 MT 5K7J8 Y7R0X H500EPM-00
- 【Compatibility】500W D500EPM-00 DPS-500AB-49A Power Supply Compatible with Dell Optiplex 7080MT 7070MT 7060MT 3050MT G5-5090 3050 3650 3670 3671 5090 5060 3260 3681 XPS 8940 MT.
- 【Compatible Model Number 】D500EPM-00 DPS-500AB-49A H500EPM-00 4FWF7 04FWF7 L460EBM-00 H460EBM-00 , Replacement for Part Number: 05K7J8 5K7J8 0Y7R0X Y7R0X.
- 【Input & Output】100-240 V, 50-60 Hz, 7.0A. DC Output: Max Output 500W.
- 【Connector】 4+4+6+6+8 pin,1* 500W power supply.
- 【Warranty】1 Year warranty, For any reason you're not completely satisfied, you can ask for a replacement or full refund..
Check StockKICKER 45VL7R122 Single 12 L7R Loaded Vented Enclosure - 600 Watts RMS
- Each L7R sub box is engineered to exact specifications, so you get world-class sound quality in a ready-made enclosure. You’re just minutes away....
- The L7R ports are engineered to deliver smooth, powerful bass without the “huffing” sound you experience in inferior port designs..
- All L7R enclosures are engineered with extensive internal bracing, thick MDF construction and rounded corners..
- KICKER’s L7R square-sub technology gives you up to 20% more cone area than a round driver..
Check StockKicker 45DL7R122 Car Audio L7R Solobaric L7 Dual 12" Vented Sub Box Enclosure
- Each L7R sub box is engineered to exact specifications, so you get world-class sound quality in a ready-made enclosure. You’re just minutes away from the best bass you’ve heard!.
- The L7R ports are engineered to deliver smooth, powerful bass without the “huffing” sound you experience in inferior port designs..
- All L7R enclosures are engineered with extensive internal bracing, thick MDF construction and rounded corners..
- KICKER’s L7R square-sub technology gives you up to 20% more cone area than a round driver..
Check StockMoving Beam Lamp,Projection Bulb 7R 230w Moving Head Beam Light Lamp, MSD Platinum 7R Lamp
- 【230W 7R Bulb】 Moving beam light bulb, PBT integrated lamp body, MSD technology, luminous flux: 11200lm, color temperature: 8000k, CRI: 75.
- 【High-quality wick】 The core performance is greatly enhanced, high brightness, stability and durability, long range, high color rendering..
- 【Life 2000 hours】Strong heat dissipation, low energy consumption, high-intensity reflector lamp cup, enhanced light gathering, solid material, longer service life..
- 【Safe and easy to use】 No mercury, no ultraviolet/infrared rays. Installation is time-saving, labor-saving, convenient and suitable for all conventional lamp holders..
- 【Wide uses】 You can use it for moving head lights, projectors, 7R sharp lights, 7R scanner lights, 7R follow spot lights, stage lighting, stage equipment..
Check StockDJI RSC 2 - 3-Axis Gimbal Stabilizer for DSLR and Mirrorless Camera, Nikon Sony Panasonic Canon Fujifilm, Ronin SC, 3kg Payload, Vertical Shooting, Touchscreen - Black
- BATTERY: Charge less and shoot longer thanks to RSC 2’s advanced battery, which provides a 14-h runtime and supports fast charging.
- COMPATIBLE WITH MOST CAMERAS: DJI Ronin App requires iOS 11.0, Android 7.0 or above. Compatible devices include: Sony A9, A6600, A6500, A6400, A6300, A6100, A7R IV, A9 II, A7R III, A7M III, A7S III, A7R II, A7S II, A7M II, A7S, Nikon z6, z7, z50, D780, D850, Canon EOS r, r6, r5, RP, 6D Mark II, 5D Mark III, 6D, 77D, 800D, 80D, 5D Mark IV, 5DS R, M50, 90D, 200D Mark II, G7X 3, Panasonic GH5, GH5S, G9, S1, S1H, GH3, G95, GH4, Fujifilm X-H1, X-T2, X-T3, X-T4, X-T20, X-T30, X-E3, Blackmagic Design BMPCC 4K, Sigma FP, Olympus E-M1 II, Z CAM Z CAM E2,Display size: 0.0.
- Optical sensor resolution: 0.0 megapixels.
- Video capture resolution: 2K DCI 1080p,Lens type: Fisheye,.
Check StockQWORK 2 Pack 35W HID Ballast Ultra-thin Quick Start Xenon Lamp Bulb DC 12V or H1 H3 H7 H8 H9 H11 9005 9006 H4
- High quality material: Aluminum shell, good heat dissipation, long service life, dustproof, waterproof, heat resistant..
- Easy Installation: Plug and play, Easy to install..
- Power supply: voltage 35W /12V, average/maximum current 3.3a/ 4.8A..
- HID ballasts are compatible with :H series :H1, H3, H3C, H4-1, H4-2, H7, H7C, H7R, H8, H9, H10, H11, H13, H13-2, etc. 9 Series :9004, 9004-2, 9006,....
Check StockSony Cyber-Shot RX100 VII RX100M7 Premium Compact Camera DSC-RX100M7 24-200mm Zoom Lens Essential Bundle with Triple 3X Battery Pack + 64GB Memory Card + Deco Gear Travel Case Accessory Kit
- 【Wide Applications】The mini camera tripod can double as a handheld grip and is designed to provide a sturdy base of support for use with Sony DSLR....
- 【Compact Design】ABS environmental plastic and silicone. It's only about 145g (0.3 lbs). It is an ideal solution for photographers searching for a....
- 【Increased Stability】Non-slip feet design to keep the tripod steady. Maximum load weight is 1kg (2.2 lbs) for optimal performance. Legs fully....
- 【Compatibility & Multi-Angle Shots】Compatible with Sony DLSR Camera, comes with a standard 1/4 '' adaptor screw thread. Equipped with mini swivel....
- 【Compatible with】: A6000,A6100,A6300,A6400,A6500,A6600,A7,A7R II,A7R III,A7R IV,A7R M3,A7R M4,A7 III A77II,A7S,A9,A7S....
Check StockDJI Ronin-SC Pro Combo 3-Axis Gimbal Stabilizer for Mirrorless Cameras Compatible with Sony Panasonic Lumix Nikon Canon, up to 2kg Payload (CP.RN.00000043.01) (Renewed)
- Sony: A6000, A6100, A6300, A6400, A6500, A6600, A7, A7M2, A7M3, A7R2, A7R3, A7R4, A7S, A7S2, A9, Rx10 III, Rx10 IV, RX100 V, Rx100 VI, Rx100 VII.
- Axis locks on each arm allow for faster storage and individual axis balancing. The Quick-Release Plate includes a positioning block to memorize the perfect camera position for instant remounting. Offers a suite of advanced capturing features to unleash your imagination like Panorama, Timelapse, Motionlapse, Motion Control, ActiveTrack 3.0.
- What you get: DJI Ronin-SC, BG18 Grip (Built-in Battery), Extended Grip/Tripod (Plastic), Quick-Release Plate, Camera Riser, Carrying Case, Phone Holder, Lens Support, 2x 8-pin Port Cover, 2x Wrench, 3x Camera Screw 1/4"-20, 4x Screw M4, Multi-Camera Control Cable (Multi-USB), Multi-Camera Control Cable (Type-C), USB-C Cable, Multi-Camera Control Adapter (Type-C To Micro USB), Focus Motor, Focus Motor Rod Mount, Focus Wheel, Focus Gear Strip, 6x Screw, RSS Splitter.
- DJI Ronin App requires iOS 9.0, Android 5.0 or above Compatible Devices Include: iPhone 11 Pro Max, 11 Pro, 11, XS Max, XS, XR, X, 8 Plus, 8, 7 Plus, 7, 6s Plus, 6s, 6 Plus, 6, SE, iPad Mini 4, iPad Pro, Samsung Galaxy S10+, S10, S9+, S9 , S9+, S9, S8+, S7, Note8, Not....
Check StockAndoer Camera Cage Aluminum Alloy Video Cage with Dual Cold Shoe Mounts Numerous 1/4 Inch Threads Replacement for Sony A7IV/ A7III/ A7II/ A7R III/ A7R II/ A7S II
- 【Compact Video Cage for Camera】The video cage is compatible with S' A7IV/ A7III/ A7II/ A7R III/ A7R II/ A7S II camera. No block to camera button and battery compartment, convenient to operate and easy to replace battery..
- 【Multi-functional Camera Cage】This camera cage is a simple but versatile platform for you to add accessories to make your video recording more professional while protecting your camera from accidental damage..
- 【Stable Camera Installation】With a standard 1/4 inch screw for mounting your camera firmly, you can use the included hex key to fix the screw into the camera easily. And the rubber pads protect your camera from scratches..
- 【Multiple Mounting Options】With dual cold shoe mounts and numerous 1/4 inch screw holes for installing various accessories.
- 38mm standard Arca-Swiss bottom plate design, quickly connect the camera cage with tripod ball head..
- 【Solid Construction】Made of aluminum alloy material, CNC processing, with a black anodized finish, the camera cage is durable and anti-rust. It also gives your camera the best protection all the time..
Check Stock