Reviews Guitar Volume Tone Pots

Musiclily Pro Brass Shaft Full Metric Size A500K Guitar Pots Audio Taper Potentiometers for Electric Guitar/Bass (Set of 4)

  • These pots are widely used guitar tone and volume controls. Metric sized pots mostly use in import guitar or Asia made guitar.
  • 6mm knurled split brass shaft fits a coarse-knurled (18-spline) knob. It will fit modern Squier/Epiphone/ibanez/ESP etc made in China/Korea/Japan guitar's stock knobs.
  • Metric sized, Thread M8 x 0.8, Thread height 10mm (3/8"), aluminum. 24mm (15/16") diameter full sized base . Standard solid construction.
  • Audio taper with standard ±20% resistance tolerance, 500K-ohm pots are standard controls for humbuckers. A250K gives a slightly warmer tone than a 500K, and bleeds off (attenuates) some of the high frequencies to ground.
  • Package included: 4 pieces potentiometers, nuts and washers.
Check Stock

Metallor Guitar Volume Tone Control Knobs Knurled Metal Dome Style 18mm Diameter 6mm Solid Shaft Knobs Compatible with Tele Telecaster Style Electric Guitar or Bass Guitar 4Pcs Chrome.

  • These control knobs push fit onto the 6mm(0.24inch) diameter split shaft of the tone and volume pots on your guitar. No screw hole on the knob, fits most guitar bass, perfect used for your Tele, LP, EPI, ST, SQ style guitar and control the volume tone..
  • Overall height of the knob is 18mm(0.71inch) and is 18mm(0.71inch) in diameter. Hollow shaft diameter: Aprox.6mm(0.24inch), Please be sure to verify the pots diameter of your guitar before you order the item..
  • Material: Durable metal body with plastic inside. Shape: Cylinder with a dome. Color: Chrome, as the picture shown. Package includes: 4Pcs guitar knobs..
  • If your knobs are dirty, dingy and old, or just want to dress up your guitar, these will work great..
  • Brand new, testing is fine, high quality, item 100% like the picture shown..
Check Stock

Musiclily Pro Metric Size 18 Spline Top Hat Bell Reflector 2 Volume 2 Tone Knobs Set for Epiphone Les Paul SG Electric Guitar Asia Import Guitar Bass Split Shaft Pots, Black with Silver Top

  • Fits most Asia made guitar bass pots like Alpha pots, after 2000's Epiphone Les Paul/SG/ES and almost all Ibanez/ESP/Cort guitars which made in Japan, Korea, China and Indonesia.
  • This knob will NOT fit imperial inch Size pots like CTS/Fender/Dimarzio/Burns pots, you can find our imperial inch Size knobs for them.
  • 18 coarse splines, 6.0mm inner diameter, numbers 0-10. Bell-shaped volume and tone knobs with metal top.
  • Correct color, shape and font, it will dress your guitar/bass right.
  • Made of acrylic, Set of 4 ( 2 Volume, 2 Tone).
Check Stock

HEALLILY Dual Concentric Control Knobs Stacked Knobs for Electric Guitar Bass

  • Dual knurled concentric knobs, strong metal shell with great endurance and durability..
  • Great replacement for your broken, dirty or old volume tone control knob..
  • Control the tone and volume on the same pot. To be used with the dual concentric pot..
  • Compatible with all most Fender Strat/ Tele/ Gibson Les Paul electric guitar or bass..
  • Fits 6MM import concentric pots and split shaft pots,no screw hole on the knob..
Check Stock

Dopro 5pcs Linear Guitar Pots Volume 500K Electric Guitar Large Pots 24mm Base with Long Split Shaft Guitar Potentiometer B500K

  • Audio Taper (A) increases or decreases in a sloped curve fashion.
  • Linear Taper (B) increases or decreases in a linear fashion.
  • Audio Taper (A) are always used as Tone and Linear Taper (B) are always used as Volume, but you can use Audio Taper as Volume and Linear Taper as Tone as well, it usually depends on your personal preference..
  • Very hot quality metric guitar pots for most electric guitars.
  • Package includes 5pcs Guitar pots with nuts and washers.
Check Stock

Guitar Wiring Harness Guitar Prewired Harness Humbucker Wiring Harness Prewired 3 Way Chrome Box Toggle Switch 500K Pots for Electric Guitar with 2 Humbuckers guitar wiring kit

  • Sturdy & Durable: Electric guitar wiring harness is made of high quality material, sturdy and durable, ensure a long time use. Delicate workmanship with good texture, wires are antiaging and durable,great for you to use..
  • Prewired Wiring Harness: This Electric Guitar 2500K Pots Control Knobs harness is completely prewired. All you need to do is solder your pickups to the switch and ground them to the volume pot.Electric Guitar Wiring Kit is easy to install and use..
  • Perfect Replacment Parts: Use this prewired guitar wiring harness humbucker for electric guitar with 2 humbuckers. Great circuit replacement parts for electric guitar, suitable for banjo lovers..
  • Specifications: 3 Way Chrome Box Toggle Switch, One Volume / One Tone, 2500K Full Size Pots with 18mm Shafts / Base Dia: 16mm, 0.047 acitors, Chrome Input Jack, packlist include: 1 * Guitar Circuit Main Items..
  • Application: Electric Guitar 3way Selector Switch harness for use on most American, American Standard, American Special, Standard and Deluxe series guitars..
Check Stock

Prewired Wiring Harness Kit for LP Electric Guitar 2T2V 500K Pots 3-position Toggle Switch with Jack for Dual Humbucker Gibson Les Pual Style Guitar Electronics Replacements White Cap

  • Circuit wiring set for LP SG EPI Style electric guitar, Material: Metal and wire, Switch Cap: White.
  • 2 volume / 2 tones / 3 way switch, 2 capacitors, 1 input jack socket, prewired components make for an easy install, each tone pot has its own 2A473J capacitor, as well replace all the electronics..
  • 2 Volume and 2 Tone Knob Pots: 2 B500k full size potentiometer, 2 A500k full size potentiometer, Pots Shaft length: approx. 18mm / 0.71", Base diameter: approx. 16mm / 0.63", Switch: Approx. 18 x 28 x 49mm / 0.71 x 1.1 x 1.9 inch.
  • 2 tone potentiometers with the green capacitors and 2 volume potentiometer with no capacitor, pots are smooth and consistent, switch is excellent and cool that it came with a white tip.
  • Wiring diagram as the picture seventh shown, this harness is completely prewired. All you need to do is solder your pickups to the switch and ground them to the volume pots, more instructions please help to see the description as below. (Any other problem about product or replacement, please help to contact the seller, The way to Contact Seller: Find your order -- Contact Seller, thanks.).
Check Stock

Musiclily Pro Inch Size Jazz Bass Knobs Set for USA CTS Pots Fender JB Style Bass, Black (Set of 3)

  • Ideal for Fender Jazz Bass style bass. If your bass is other style and use imperial inch size 24-splines pots, it will work as well.
  • Fits common 1/4 inch split shaft imperial size pots, fits most USA made guitar and fine-knurled 24-spline shafts USA CTS/Fender/Bourns/DiMarzio standard pots.
  • If your pots are coarse-knurled 18-spline shafts or import metric size, do not buy it.
Check Stock

HENGYEE Guitar Screw Kit Assortment with Custom Acrylic Storage Box for Electric Guitar Bridge,Pickup Ring, Pickguard, Tuner

  • Circuit wiring set for SSS SSH style Fender Squier Stratocaster electric guitar, material: metal and wire, switch cap: Black.
  • Wiring harness: 1 volume / 2 tones / 5 way switch, 2 capacitors, 1 output jack socket.
  • 1 Volume and 2 Tone Knob Pots: Two A500k potentiometer, 1 B500k potentiometer.
Check Stock

Electric Guitar Circuit Wiring Kit Guitar Circuit Wiring Harness Kit with 3 Box Toggle Pickup Selector 2V/2T/1J fit for LP Electric Guitar

  • These include Two volume/ Two tones / Three way switch.Two A500k potentiometer, two B500k potentiometer, two 2A683J capacitors, one jack socket..
  • Circuit wiring set with 3 box toggle pickup selector 2V/2T/1J is especially designed for LP electric guitar..
  • If you want to install an electric guitar yourself,this harness kit to control the volume and tone is essential for guitar lovers..
  • This harness is completely prewired. All you need to do is solder your pickups to the switch and ground them to the volume pots..
  • Made of quality materials with fine machining, lightweight, wires are anti-aging and durable..
Check Stock

Unxuey 3PCS Guitar Top Speed Control Knobs for 6MM Shaft Pots Metal Volume Tone Knobs Electric Guitar Bass Parts

  • Fits any guitars or basses which have split shaft pots with diameter 6mm or less than 6mm,but they do not fit larger 1/4"(6.35mm).
  • Package includes: 2 tone knobs,1 volume knob.
  • Fits for most LP, TL, ST guitar and similar electric guitar or precision bass instruments.
  • Please be sure to verify the diameter of your pots as well as the dimensions of the knobs before you order the item.
Check Stock

Golden Age Premium Wiring Kit for P-Bass

  • Guitar wiring at its simplest: one volume and one tone - all the parts you need in one convenient kit.
  • This premium kit features the right wire for Fender and vintage-style guitar circuitry, and the pots in this kit are upgraded to CTS brand for longer life and a smoother, more accurate response.
  • See Product Description for full list of kit components.
Check Stock

Metallor Guitar Knobs Volume Tone Knobs Speed Control Knobs Compatible with 6mm Solid Shaft Tele Telecaster Style Electric Guitar or Bass Guitar Set of 4Pcs Chrome.

  • These control knobs push fit onto the 6mm(0.24inch) diameter split shaft of the tone or volume pots on your guitar. No screw hole on the knob, Great control knobs replacement for Telecaster P-Bass, Jazz Bass..
  • Overall height of the knob is approx. 20mm(0.79inch) and is approx. 20mm(0.79inch) in diameter. Hollow shaft diameter: Aprox.6mm(0.24inch), please be sure to verify the pots diameter of your guitar before you order the item..
  • Material: Durable metal body with plastic inside. Shape: Cylinder with a dome. Color: Chrome, as the picture shown. Package includes: 4Pcs guitar knobs..
  • If your knobs are dirty, dingy and old, or just want to dress up your guitar, these will work great..
  • Brand new, testing is fine, high quality, item 100% like the picture shown..
Check Stock