Reviews Groove End Butterfly Valve

DERNORD Sanitary Butterfly Valve Repair Kit, Silicone Seat w/ (2) Bushings - for 1-1/2\ Valves

  • Size (spec): for 1-1/2" Sanitary Butterfly Valve.
  • This sanitary butterfly valve repair kit is mainly suitable for DERNORD butterfly valve.
  • Temperature Rating (spec): 15°F thru 200°F.
Check Stock

DC 24V 1.5\/Φ38 Port Motorized Butterfly Valve, 304 Stainless Steel Tri Clamp GDAE10 for Food, Pharmaceutical, Beverage, Cosmetics, Sanitary 8W

  • 【FOOD-GRADE 304 STAINLESS STEEL】 - The pneumatic butterfly valve comprises 304 stainless steel material, no odor, high strength, and good corrosion resistance. They are specially designed for long service life. There is a silicone ring inside to ensure the tightness so that the liquid is not easy to leak..
  • 【HASSLE-FREE OPERATION】 - Convenient operation allows you rapid opening and closing, only to rotate 90° from fully open to fully closed. Control mode: single-acting, automatic return, You can perform local control and remote control, saving human resources and time to a large extent..
  • 【ACCURATE PRODUCT PARAMETER】 - The outer diameter of the sanitary pneumatic valve is 2 in / 51 mm, the size of the ferrule is 2.5 in / 64 mm. Our butterfly valve adopts a disc-shaped butterfly plate, which can better control the flow of liquid..
  • 【EXCELLENT & STABLE PERFORMANCE】 - Applicable temperature: ≤176 °F.
  • Environment temperature: 14 °F to 176 °F.
  • Sterilization temperature can reach to 392 °F. Air supply pressure: 5bar-8bar. Maximum pressure 1.6Mp. Our pneumatic butterfly valve is more adaptable than other models on the market..
  • 【APPLICABLE MEDIUM】 - Our tri-clamp butterfly valve is simple in structure, compact in body, light in weight, an....
Check Stock

275 330 Gallon IBC Tote Adapter,IBC Tote Brass Valve with 5/8' Outlet,2' Coarse Thread

  • The valve is used for plastic container outlet control to prevent liquid from splashing around..
  • It has the advantages of acid resistance, alkali resistance, corrosion resistance, high mechanical strength..
  • Inner diameter input end diameter: 75mm,Operating temperature -20 degrees centigrade ~ 70 degrees centigrade..
  • The butterfly valve introduces foreign technology, is made of high-density polyethylene and other engineering plastics,and is assembled, with novel structure and beautiful appearance..
  • Widely used in chemical process and acid, liquid storage buckets, tanks, container outlet control valves..
Check Stock

NMN Precision NON MDS Lifters Set 53021720AA 53021720AB Replacement for 2003-2018 Chrysler 300 Dodge Ram 1500 Charger Challenger Grand Cherokee 5.7L 6.1L 6.4L HEMI Replace# 5038784AD 5038686AA

  • ...rom an engine's normal thermal expansion process.
  • A guide and anti-rotation device for the valve lifter comprises a vertically-disposed leg which seats in a slot formed on the valve lifter and a pair of cylindrically shaped arms, extending horizontally from opposite edges of the leg, which seat in a circumferential groove also formed on the valve lifter. A hook, connected to an upper end of the leg by a reverse bend, seats in a bore formed in the cylinder block.
  • Quality materials used, meets or exceeds OEM standards, 100% tested before shipping..
Check Stock

The Light We Lost

  • ★ Set Includes: 1 x pointed hook, 1 x bend hook, 1 x 45 degree hook, 1 x90 degree hook. Four different angles of groove head, to meet your different needs. Ultra-fine tips precisely probe, pierce, pry, pull, and position small parts in tight spaces..
  • ★ Materials: Made of high quality steel and rubber covered non-slip handle, durable in use..
  • ★ Rubber-coated Handle: Non-slip handle with padding provides extra control and helps with precision work or handwork. The handle is concave and convex with a striped front edge design that conforms to the hand grip pattern and is non-slip to save effort..
  • ★ Extended Size: Full length 9.45 inch, handle length 3.54 inch, rod length 3.54 inch, rod thickness 0.12 inch..
  • ★ Universal Design: This kit can be conveniently used for ignition system, intake valve, rifle bolt surface, seals, fuel valve O-ring, hose end O-ring and various electronic equipment. It is your right assistant for repair or disassembly. Ideal for assembly, repair, or removal of small parts..
Check Stock

DERNORD Butterfly Valve with Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 Inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • .... The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. Electric Exhaust Cutout Working Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. Electric Exhaust Cutout is not recommended to start work in heavy rain or extremely cold weather, the valve motor is NOT WATERPROOF..
  • SPELAB warrants the Electric Exhaust Cutout Valve Kit for 12 months warranty for quick-wear part. Include (motor, remote control, control box). We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will ....
Check Stock

Pelican 1120 Case With Foam (Orange)

  • Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring..
  • Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out..
  • Pelican's Pick N'Pluck foam lets you customize the interior..
  • Stainless steel reinforced padlock protectors.
  • Interior Dimensions (inches): 7.25 x 4.75 x 3.06.
Check Stock

GrooVex Golf High Precision Carbide Groove Sharpener, Maximum conforming Groove Geometry (.035" W .020" D .010" Edge Radius)

  • 2-in-1 tool for sharpening and cleaning grooves. Use the sharpening end to bring your grooves back into conforming spec. We recommend groove re-sharpening every 10-12 rounds. The cleaning end can be used for normal groove maintenance. Maximizing groove volume and maintaining a sharp .010" edge radius will have your clubs performing like new in minutes..
  • Premium grade (C2 sub-micron) solid tungsten carbide 92 Rockwell. The ultra-high quality and hardness of the material allows us to CNC grind a cutting edge that is durable and unmatched by any other golf groove sharpener on the market..
  • CNC precise conforming groove geometry holding aerospace tolerances of +/-.001" .035" W .020" D .010" Sharp Edge Radius. The most aggressive groove allowed, creating maximum spin and control. GrooVex is proudly made in the USA by a subsidiary of the world's largest cutting tool (carbide endmill/drill) manufacturers..
  • We created the GrooVex Golf Groove Sharpener because we love our clubs. We know how they perform around the greens, from specific distances, and consistent flight characteristics. New clubs are great, but re-learning how they perform can take time. Make your old gamers perform like when they were new. Bring back the bite with GrooVex Golf..
Check Stock

RAINPAL RBS022 LF Brass Rain Barrel Spigot(3/4" Quarter Turn Ball Valve w/Bulkhead Fitting, Thread Tape and Cord) (2 Pack)

  • Rust Proof Design: with Brass Body and Stainless Steel Handle..
  • Leak Proof Design: Thick and Strong Gasket in Groove, Make a watertight seal..
  • Free Proof Design: Thick Brass Body withstand Expansion when Freezing.
  • Lead Free Compliant Brass, Suitable for Potable Water.
  • Heavy Duty 4.0 oz Solid Brass Bulkhead Fitting, Female 3/4" NPT Threaded on Both Ends, install spigot on either end. Heavy Duty 6.0 oz 3/4" No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up.
Check Stock

Pelican 1450 Case With Foam (Black)

  • Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring..
  • Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out..
  • Pelican’s Pick N’Pluck foam lets you customize the interior..
  • Stainless steel reinforced padlock protectors.
  • Interior Dimensions (inches): 14.62 x 10.18 x 6.00. Lid Depth-1.75 inch, Bottom Depth-4.37 inch, Total Depth-6.12 inch.
  • Single folding front handle with no-slip overmolded cushion grip.
Check Stock