Reviews Grommet Insertion Tool

Jonard FT-6 Flaring and Insertion Tool, 4-1/4\ Length

  • The flaring end of the tool facilitates the expansion of the cable providing easier insertion of "F" connectors.
  • The insertion end makes "F" connector insertion fast and easy, even in cold weather.
  • This tool is recommended for use on polyethylene jacketed cables and plenum cables, and is especially helpful when using tri-shield and quad-shield cables.
Check Stock

All-in-One Snap Grommet Eyelet & Rivet Plier Tool Kit Ideal Enclosure for Tarps Shoes Shower Curtains Boat Covers Arts & Crafts Etc - by Ram Pro

  • ✓ The Ram Pro All-in-One Snap, Grommet, Eyelet & Rivet Plier Tool Kit is just the perfect tool kit for fastener installation setter for the tarps,....
  • ✓ SPECS: Our grommet setter tool is actually the complete fastener installation setter set which comes with the following. A 9 inch HD Plier, 18....
  • ✓ QUALITY: The grommet setter kit is just of the ideal quality so that none of the users can get even a single chance to complain. Being made up of....
  • ✓ DESIGN: The manufacturers have designed the grommet kit in such a way that the set is perfectly usable. The product is very well designed which....
  • ✓ USES: The grommet setter tool finds a wide range of applications where there is a need of installing buttons, replacing or removing snaps, press....
Check Stock

All-in-One Snap Grommet Eyelet & Rivet Plier Tool Kit Ideal Enclosure for Tarps Shoes Shower Curtains Boat Covers Arts & Crafts Etc - by Ram Pro

  • ✓ The Ram Pro All-in-One Snap, Grommet, Eyelet & Rivet Plier Tool Kit is just the perfect tool kit for fastener installation setter for the tarps,....
  • ✓ SPECS: Our grommet setter tool is actually the complete fastener installation setter set which comes with the following. A 9 inch HD Plier, 18....
  • ✓ QUALITY: The grommet setter kit is just of the ideal quality so that none of the users can get even a single chance to complain. Being made up of....
  • ✓ DESIGN: The manufacturers have designed the grommet kit in such a way that the set is perfectly usable. The product is very well designed which....
  • ✓ USES: The grommet setter tool finds a wide range of applications where there is a need of installing buttons, replacing or removing snaps, press....
Check Stock

General Tools 71262 Grommet Kit with 24 Rustproof Solid Brass Grommets, 3/8 Inch

  • RUSTPROOF: Solid brass grommets will never rust for years of durability and performance.
  • ALL-IN-ONE: This easy-to-use grommet kit set includes a hole cutter, a matched mandrel/anvil pair, a hardwood backer block and 24 grommets.
  • COMFORT: The grommet setting tool features a knurled body for greater comfort and safety.
  • VERSATILE: General Tools utility grommet kits are used to reinforce holes and prevent tearing with canvas, vinyl, leather and fabric.
  • REPAIR, DON'T REPLACE: Great for repairing canvas, tarps, tents, awnings, canopies, luggage, upholstery, curtains and pool or boat covers.LABELED: Setting tool and anvil are coded with lines for each individual size grommet.REFILLS AVAILABLE: No need to buy another kit, 3/4 -Inch solid brass grommet refills available with General Tools Grommet Refill, Model# 1261-2.
Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

  • 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
  • Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
  • The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
  • Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
  • Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
  • Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
  • Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
  • It can help you drill easily and fast and save time and energy for you.
  • The combination of blue and black color makes the dr....
Check Stock

Connectors Pro Pc Accessories 2-Pack DB Pin Tool, D-Sub Insertion/Extraction Tool

  • Pin Insertion Tool On One End And The Extraction Tool On The Other.
  • This Pin Insertion And Extraction Tools Makes The Job Easier By Properly Setting Or Removing Typical Contact Pins From D-Sub Connectors.
Check Stock

Jonard Tools WK-7 IC Insertion Extraction 5 Piece Tool Kit

  • DIP IC INSTALLATION: This tool kit is designed to facilitate the installation and extraction of DIP IC and PLCC chips on circuit boards.
  • CMOS SAFE: All tools that engage conductive surfaces are CMOS safe and include grounding lugs where appropriate.
  • INCLUDES: EX-1 DIP IC Extractor (8-24 pins), EX-2 DIP IC Extractor (24-40 Pins), EX-5 PLCC Extractor, ESD Safe, MOS-1416 Insertion Tool (14-16 Pins), and MOS-2428 Insertion Tool (24-28 Pins).
Check Stock

General Tools 1/2\ Grommet Tool Kit - 12 Solid Brass Grommets for Tarps Repair & 1261-4 1/2-Inch Grommet Refill, 2 Packs of 12 Sets, 24 Complete Grommet Sets

  • Product 1: CANVAS REPAIR KIT: This versatile set is used to reinforce holes and prevent tearing materials, including canvas, leather, fabric, and vinyl. Instead of replacing your possessions, repair your tarp, flag, awning, and pool or boat covers..
  • Product 1: PROFESSIONAL GROMMET KIT: Our easy-to-use set includes a hole cutter, single hardwood backer block, hardened mandrel, anvil, setting tool, and 12-1/2" brass grommets. They are solid and will never rust.
  • enjoy years of durability and performance..
  • Product 1: TARP RINGS: The anvil and setting tool are coded with lines for each size grommet, allowing you to quickly choose which eyelets you need for your project. For added comfort and safety, the appliance features a knurled body..
  • Product 1: EYELET SETTING TOOL: Choose your cloth, put the block under your item, and center the hole cutter where you're installing the grommet. Hammer to punch the hole and install. Place the grommet on the mandrel, beat it evenly, and complete your project..
  • Product 2: For use with General's 1/2" grommet kits.
Check Stock

1/4 Inch Grommet Kit 200 Sets Grommets Eyelets with 3 Pieces Install Tool Kit (4 Colors)

  • Grommet kit: 200 sets grommets in 4 colors, bronze, gun color, gold, silver, 50 sets per color.
  • 3 Pieces grommet tools include 1 base, 1 punch and 1 install tool.
  • Copper grommets: made of durable copper material, strong and solid.
  • Size: inside diameter is approx. 1/ 4 inch (6 mm), outside diameter is 3/ 8 inch (10 mm), barrel length is 1/ 8 inch (3 mm).
  • Easy to use: you can easily use the grommet kit to repair by yourself.
  • Please mark incisive end of the drilling tool on the leather, and then hit the leather with a hammer or another mounting tool.
  • If the leather is thicker, you need to hit the leather several times.
  • They are useful accessories for leather, tents, awnings, canvas, tarps and other cloth-made items.
  • Practical grommet tools: they can be applied for poking a hole on leather crafts, leather straps or clothing, then hammering to push grommets together.
  • Suitable storage way: all grommets and tools are contained in clear compartment storage box, which makes it more convenient to find the corresponding components.
Check Stock

D-Sub Pin Insertion and Extraction Tool

  • Tool to insert or extract D-Sub pins with ease.
  • Red side for insertion and the white side for extraction.
Check Stock

Cable Leader D-Sub Pin Insertion & Extraction Tool

Check Stock

C.S Osborne & Co No W-1 Hand Press Machine for BUTTONS GROMMETS SNAPS & VENTILATORS MPN #75000

  • 【Interchangeable Molds】: Package includes 1 x Grommet Machine, 3 sets x Dies, 3 bags x Grommets (Total 1500 pcs). The eyelet punch tool can....
  • 【Durable and Labor-Saving Operation】: Made of high quality material, built to last. This manual eyelet rivet press machine is very easy to operate....
  • 【Easy to Use】: Heavy duty hole punch tool machine can be mounted to a tabletop or stand alone, which can fit anywhere as you want, just install....
  • 【Multifunctional Grommet Machine】: Grommet kit is designed for banners, signs, awnings, posters, curtains, digital printing, scrapbooking,....
  • 【Wide Application】: This 3 die hand press grommet machine is an essential equipment for dress makers, arts & crafts, sign shops and manufacturers,....
Check Stock

CompuCablePlusUsa.com Best Pack of 3 Dsub Insertion/Extraction Crimp tool (Upgrade new version in 2021)

  • Pack of 3 Tool for RS232 Crimp type Contact Pin Use..
  • Item Comes with Red End for Pin Insertion and the White End for Extraction.
  • This Pin Insertion And Extraction Tools Makes The Job Easier By Properly Setting Or Removing Typical Contact Pins From D-Sub Connectors.
  • Tool Length 3.9" ( 99+/-3mm), Copper Material ABS Resin, Weight 5 g..
Check Stock