Reviews Grit Hole Saw

2 inch Carbide Grit Hole Saw, 1-1/2 Inch Cutting Depth for Brick, Concrete Block, Stucco

  • 【PACKAGE】This Carbide grit hole saw kit includes 4 3/8 Inch(111mm) Black SAW BLADE, 1 SDS PLUG MANDREL, 1 DRILL BIT, and 1 CARBIDE TIPPED PILOT DRILL BIT to satisfy your different needs.
  • 【UNIVERSAL APPLICATION】This Carbide grit hole saw is your ideal choice for brick, concrete block, fiber cement siding , backer board, stucco & old plaster.
  • 【EASIER TO CUT】Carbide grit hole saw cuts through a wide range of abrasive materials.
  • 【100% Satisfaction Guarantee】We are dedicated to providing every customer with satisfying products and services.If you are not satisfied with our product, we will provide a free return or refund for you.
Check Stock

IVY Classic 26632 2' Carbide Grit Edge Hole Saw Kit, USA, 1/Card

  • Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit.
  • Cuts ceramic tile, marble, slate and fiberglass.
  • Continuous rim of carbide grit ensures smooth cutting.
  • Carbide Grit Hole Saw Made in USA, Diameter 2-inch, Cutting Depth: 1-inch.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

  • This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
  • This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
  • The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

Lenox Tools - T29964-64CG LENOX Tools Hole Saw, Carbide Grit, 4-Inch or 102mm (2996464CG)

  • Carbide grit hole saw cuts through a wide range of abrasive materials.
  • Hole saw has a clean-cutting carbide grit edge that won't snag or chip when cutting thin materials.
  • Use the hole saw with a 2L or 7L standard arbor or a 2L SNAP-BACK arbor.
  • Heat resistant carbide teeth for long life in tile and stainless steel..
Check Stock

PLG2SUPT Recessed Light Hole Saw Kit 6-3/8,5-3/8,4-3/8,3-1/8 Inch Carbide Grit for 6”,5”,4”,3” Light Cutting Drywall, Ceiling Tile

  • This recessed light Carbide grit hole saw cutter Install kit includes: 3-1/8”(79mm), 4-3/8”(111mm), 5-3/8”(137mm), 6-3/8"(162mm) hole saw bit, 1 of 0.43”(11mm) hex shank large arbor, 2 of 3.5" (89mm) pilot HSS drill bits.
  • The carbide grit edge hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • The hole saw teeth is specially designing. It’s more sharp and more fast than tradition one. 4 pack hole saws are good match. It’s for professional choice..
Check Stock

HLOFIZI 4-3/8 Hole Saw for 4' Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock

  • LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
  • FAST EASY CLEAN CUTTING - HLOFIZI 4-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
  • PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 4" can light fixture fits.
  • MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
  • Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.
Check Stock

HLOFIZI 6-3/8 Hole Saw for 6\ Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock, Green

  • LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
  • FAST EASY CLEAN CUTTING - HLOFIZI 6-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
  • PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 6" can light fixture fits.
  • MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
  • Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.
Check Stock

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw 2-Inch or 50.8mm red

  • LENOX Diamond hole saw has a brazed diamond edge for more holes in tile and stone.
  • Diamond-tip hole saw has a durable, robust design for greater versatility in tough applications.
  • Diamond-tipped hole saw cuts holes in less time than carbide-grit or carbide-tipped hole saws.
  • Round holes make removing plugs faster and easier.
  • Uses a 2L, 3L, 6L or 7L standard arbor or a 2L or 6L SNAP-BACK arbor.
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • 【Bi-Metal 6-3/8-Inch Hole Saw】The 6 3/8in hole saw made of HSS carbon steel & Bi-metal steel, heavy-duty steel construction and carbide grit edge, ensuring perfect drilling performance and providing the fastest, most consistent and longest lasting cutting.
  • 【Recessed Lighting Hole Saw】The 6 3/8inch recessed lighting hole saw can drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gy....
Check Stock

LENOX Tools Hole Saw, Carbide, 4-1/8-Inch (2996666CG)

  • Features a hard tungsten carbide grit cutting edge.
  • It will cut tough abrasive materials such as fiberglass, ceramic tile, laminates.
  • Carbide grit edge will not snag or chip when cutting thin materials.
Check Stock