Reviews Graphited Ptfe Pipe

VCELINK Teflon PTFE Thread Seal Industrial Tape Plumbing for Shower Head, Pipe Sealing, Water Leaks, Stainless Steel, 520\ Length, 1/2\ Width, White (8 Rolls)

  • VCELINK PTFE Water Plumbers Thread Tape used to connect threaded pipes. A good solution for enhancing the tightness of pipes and stopping leaks..
  • Widely Applicable: Tape Plumbing is designed for home and threaded pipe applications. Working for both air and water, suitable for most threaded-installing piping devices, including washing machine pipes, faucets, shower nozzles, etc..
  • Good Quality: Gas Teflon Tapes has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • Easy to use: Simply wrap the PTFE tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • Package and after-sales: 8 Rolls 520" length by 1/2" width PTFE pipe sealant tape. 18 months warranty for quality problem..
Check Stock

HANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines

  • You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
  • Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
  • The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
  • Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
  • Convenient to Use: the thread seal tapes are convenient to use.
  • Just clean the 2 threaded connections that need to be sealed.
  • Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
  • And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
  • Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
  • If the thread sealing is not good, you can increase the thickness of the tape.
Check Stock

Libraton PVC Cutter 1-5/8\，PVC Pipe Cutter, Pex Cutter 1-1/4\

  • One set for all: The plastic pipe cutter set includes PVC pipe cutter *1 PEX pipe cutter *1 replacement blade for PVC cutter *1 mini tube cutter *1 PTFE sealing tapes *3.
  • Different cutting range: PVC cutter (1-5/8.
Check Stock

YS-100 Auto PVC Heat-shrink Tube Cable Pipe Cutter Cutting Machine Cut Width100mm (110V)

  • In order to arrange shipment for you ASAP, please answer the following questions: ---1.What material is the pipe you want to cut? Is the pipe made of hose or hard pipe? It would be better if you could provide a picture of the pipe ---2.What is the total length of the pipe? How long do you want to cut each? ---3.Please tell us the width of the tube and the wall thickness on one side..
  • Cutting length: 0.1 - 9999.9mm，Cut speed: 100-120cut/ minute (50mm).
  • Blade width: 100mm， Max Cutting Diameter: 22 mm.
  • Can cut PVC pipe, heat shrinkable pipe, glass fiber pipe, silicone pipe, PTFE pipe, etc..
  • Multi-material cutting, high-quality guide strip discharge more smoothly, ensure cutting accuracy..
  • Use a special utility knife to ensure that the interface is flush..
Check Stock

Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

  • ...: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting：You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it right below the drainage outlet of the sink. P.S. You need to prepare the grease inlet pipe and water drainage pipe by yourself..
  • Well-designed For Wide Use: This commercial carbon steel interceptor calls attention to the thoughtful details as well, such as the solid outlet valve, a handle on the cover for lifting, and practical sealing ring and PTFE tape. You can apply it to restaurants, fast food chains, public canteens, home kitchens, etc..
Check Stock

Harvey 017065 Gas Line PTFE Thread Seal Tape

  • Yellow gas line thread seal tape with PTFE.
  • Extra heavy, full density PTFE tape especially for gas lines.
  • Recommended leakproof sealant for lines carrying natural gas, propane, butane.
  • and water, oil, and chemical installations.
  • Use on pipe, conduit, vales, bolts, anything with a thread.
Check Stock

Suburban Mfg # 6259Apw 10Gal Suburban Door Polar

  • Useful RV water heater tool kit, contains 1 wrench, 4 drain plugs and 1 PTFE tape..
  • Special angled design wrench, helps you reach tight places and rotate drain plugs. Suitable for 15/16 inch and 7/8 inch..
  • 1/2” NPT water heater drain plugs fit for most RV water heater..
  • Wrench prongs for rusted drain valves and petcock drains..
Check Stock

VEVOR Commercial Grease Interceptor 8 LB, Carbon Steel Grease Trap 4 GPM, Grease Interceptor Trap with Side Water Inlet, Under Sink Grease Trap for Restaurant Canteen Factory Home Kitchen

  • ...: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting: You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it right below the drainage outlet of the sink. P.S. You need to prepare the grease inlet pipe and water drainage pipe by yourself..
  • Well-designed For Wide Use: This commercial carbon steel interceptor calls attention to the thoughtful details as well, such as the solid outlet valve, a handle on the cover for lifting, and practical sealing ring and PTFE tape. You can apply it to restaurants, fast food chains, public canteens, home kitchens, etc..
Check Stock

Dixon Valve & Coupling TTB75-5 White Industrial PTFE Tape, 3/4\ (Pack of 5)

  • For use in wrapping pipe threads to create air and water tight connections.
  • 520" long, 3/4" wide, and 3.5 mil thick for multiple uses.
  • Operating temperature range of -212 to +500 degrees F.
Check Stock

Harbor Freight Tools 61377 HFT 1123 Plumber's Teflon Thread Seal Tape, 10 Rolls Per Box

  • No need to use sticky, messy pipe "dope" when you're remodeling or making plumbing repairs.
Check Stock

Libraton Pex Cutter 1-1/4\

  • 【Premium Quality】Libraton PVC pipe cutter is made of durable hardness aluminum alloy steel. The thick blade used is of SK4 material with precision sharped..
  • 【Widely Application】The pex pipe cutter (cutting range: up to 1-1/4-inch or up to 31mm) is designed up to cut pipes of various plastic materials (PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). The tube cutter (cutting range: 1/8inch to 7/8inch or 3-22mm) can be used to cut pipes made of aluminum and copper. It is an essential cutting tool set for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Working with Safety】There is a safe lock in the bottom of pex cutting tool. You can buckle it when you don't use the cutter..
  • 【Reasonable Cutting Tool Composition】The PVC pipe cutting tool set includes three compositions, PVC pipe cutter x1, mini tube cutter x1 and PTFE seal tape x3, which can meet your various need when doing the pipe or tube cutting work..
  • 【Attension】This PEX cutter is suitable for most PEX pipes and thin PVC pipes. IT IS NOT SUITABLE FOR THICK PVC PIPES AND PVC PIPES WITH METAL LAYERS. Also, we offer a 12-month lifetime warranty. We have an after-sale service team here for you to ensure your 100% satisfaction..
Check Stock

Lawrence Copper Plated Lead Shot #7.5 10 Pound Bag

  • Lead shot in a mixture of sized, Washed and Re-graphited.
  • Some rocks and foreign debris to be expected.
Check Stock

Lead Shot Balls #7.5 bag 2 lbs (32 oz / 907 gm) MADE IN USA

  • Lead shot in a mixture of sized, Washed and Re-graphited.
  • Some rocks and foreign debris to be expected.
Check Stock