Reviews Graphite Sintering Mould

2 Pieces Graphite Ingot Mould Crucible Mould for Casting Gold Silver Metal Aluminum Copper Brass Melting Refining (4 x 2 x 1 Inch)

  • Reliable material: main material is graphite, the ash content is less than 0.1 percent, ensuring that the metal purity will not be affected during metal refining.
  • Rapid cold and hot use conditions, with nice thermal stability.
  • Nice characteristics: it has nice thermal conductivity, which can greatly shorten the melting time and save energy, and withstand 2000 degrees Celsius, nice acid and alkali resistance, nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance.
  • Widely applicable: the mould can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and so on.
  • Considering the size of this product, it is more suitable for small-capacity metal melting.
  • Ingot mould size: 1KG graphite ingot mould outer is 100 x 50 x 25 mm/ 4 x 2 x 1 inch, inner is 90 x 40 x 20 mm/ 3.54 x 1.6 x 0.8 inch.
  • 2KG graphite ingot mould outer is 100 x 60 x 40 mm/ 3.93 x 2.36 x 1.57 inch, inner is 85 x 45 x 30 mm/ 3.35 x 1.77 x 1.18 inch, melting and casting metals like gold, silver, brass, aluminum, copper, zinc, plumbum, and more.
  • The capacity is an approximate volume is 1 kg hold or 500g silver.
  • What you receive: there are 2 pieces of graphite ingot moulds in this package include 2 di....
Check Stock

Raw Materials  1pcs Graphite Anode Sheet Carbon Plate for Hull Cell 3mm x 70mm x 60mm

  • Package include: 2pcs high purity and high density graphite plate in one set, excellent thermal and electrical conductivity, high corrosion resistance, meet your needs.
  • Size: 50MM x 50MM x 20MM. Tolerance range: 0~0.05MM. Graphite content: 99.9%.
  • Good processability: Can be processed into various geometric shapes with enough mechanical strength and impact resistance, easy to process.
  • Application: Useful for electrode, electrolysis, sintering moulds, graphite furnace, heater parts, molds, graphite heat exchangers, insulation board and different kinds of graphite products.
  • Material: The material possesses the performance of high thermal stability and low expansion coefficient. Can be applied to crucibles and tubes for all kinds of chemical reactions. Can melt gold, alloys, silver and other high temperature melting products.
Check Stock

4 Pieces Graphite Ingot Mould Crucible Ingot Casting Mould Silver 1 KG Gold Ingot Mould for Gold Silver Metal Aluminum Copper Brass Melting Casting Refining (90 x 40 x 20 mm)

  • Package comes with: you will receive 4 pieces of graphite ingot moulds in the package, the sufficient quantities for you can meet your DIY requirements in daily life.
  • Quality material: our casting ingot crucible moulds are mainly made of graphite material, almost no ash content to ensure that the metal refining process does not affect the purity of the metal, which are durable, sturdy, reliable and reusable, not easy to break or deform, you can use them for a long time.
  • Size detail: the outside dimension of our silver gold ingot mould is approx. 100 x 50 x 25 mm/ 3.94 x 1.97 x 0.98 inch and the inner size is approx. 90 x 40 x 20 mm/ 3.54 x 1.57 x 0.79 inch, and the capacity is about 1 kg gold or 500 g silver, proper size can meet your daily needs.
  • Good performance: our ingot crucible mould has good thermal conductivity, which can greatly shorten the melting time and save energy, and can withstand a temperature of 2000 degrees Celsius, good acid and impact resistance, good alkali resistance and corrosion resistance, 89 MPA compressive strength and 48.7 MPa flex resistance.
  • Various applications: this graphite casting mould has a wide range of applications, it is suitable for experiments and melting of non-ferrous metals, such as gold, silver, metal, alumin....
Check Stock

4 Pieces Graphite Ingot Mold Stir Rod Stick Set, 5-in-1 Graphite Casting Ingot Mold Coin Combo Metal Refining Scrap Mold, 1 KG Graphite Ingot Crucible Mould, 2 Graphite Stir Rod Stick for Melting

  • "What you get: this package includes 1 piece of 5-in-1 graphite casting ingot mold, 1 piece of 1 kg graphite ingot crucible mould, and 2 pieces of graphite stir rod sticks, totally 4 pieces in 1 package, convenient combination set to meet your DIY needs for melting casting refining metal jewelry gold silver".
  • "Size information: the 5-in-1 metal refining scrap mold measures about 72 x 57 x 12 mm, and the 1 kg crucible mould is 100 x 50 x 25 mm in outer diameter, and 90 x 40 x 20 mm in inner diameter.
  • Each crucible stir rod is about 12 inches/ 30 cm long, and 5/16 inch/ 0.8 cm in diameter, please check these sizes carefully before purchasing".
  • "Wide range of applications: these graphite ingot molds are suitable for experiments and smelting of non-ferrous metals, including gold, silver, copper, aluminum, and so on, which are designed for lab, test analysis and other purposes.
  • Considering the product size, it is more suitable for small-capacity metal melting projects".
  • "Product advantages: these graphite casting molds are featured with nice thermal stability and corrosion resistance to strong acid and alkali, fast cooling, nice thermal conductivity properties can highly shorten the casting time and save energy".
  • "Nice material: these melting casting molds ar....
Check Stock

7pcs Graphite Crucible Set, Ingot Mold Set High Purity Graphite Torch Melting Casting Kit for Metal,Gold,Silver and Copper Ingot Torch Melting Kit Tool Mould Set

  • Graphite Crucible Set, Ingot Mold Set High Purity Graphite Torch Melting Casting Kit for Metal,Gold,Silver and Copper Ingot Torch Melting Kit Tool Mould Set.
  • High Purity Graphite Crucible, Well corrosion resistance, impact.
  • Grooved graphite crucible made of natural graphite with good thermal conductivity.
  • Comes with: 2 x graphite rod, 1 x quartz crucible, 1 x clamp, 2 x square graphite, 1 x cylindrical graphite.
  • If our products have any problem, we promise to help you within 24hrs..
Check Stock

Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass

  • 8" Ingot Mold Mould is equipped with a wooden handle, which is safer to use..
  • 8" iron Ingot Mold Mould, more durable than graphite crucible..
  • There are three iron blocks, you can easily adjust the capacity of Ingot Mold Mould..
  • You can apply release agent or some oil before use, so that it can be released easily..
  • If our products have any problem, pease sontact us,we promise to help you within 24hrs..
Check Stock

Skyley Cross Graphite Casting Ingot Mold Metal Refining Scrap Melting Casting Mould for Gold Silver Metal

  • Quality material: our graphite casting ingot mold is mainly made of graphite, hardly ash content ensures that the metal purity will not be affected during the metal refining process.
  • Fast cold and hot conditions, with good thermal stability, exquisite refining effect.
  • Ingot mold dimension: capacity: 5-6 ml, outside dimension: 88 x 47 x 8 mm (3.45 x 1.85 x 0.31 inch), inner dimension: 63 x 38 x 4 mm (2.48 x 1.5 x 0.16 inch), suitable for melting and casting metals such as gold, silver, brass, aluminum, copper, zinc, plumbum, etc..
  • Exquisite performance: the mold has nice thermal stability for fast heating and cooling, well corrosion resistance to strong and alkali, good thermal conductivity properties which highly shorten the melting time and save energy, exquisite impact resistance performance to ensure the reliability of product quality.
  • Wide uses: our graphite ingot mold can be widely applied for smelting of gold and silver or other metals, test analysis tools and ingot mould for making bars or necklace pendant charms.
  • What you get: the package comes with 1 piece of graphite ingot mold with exquisite craftsmanship and versatile usages, which can meet your daily needs, can meet you making bars or necklace pendant charms.
Check Stock

3 Pieces Heart Star Cross Graphite Casting Ingot Mold Metal Refining Scrap Melting Casting Mould for Smelting Gold Silver Metal Aluminum Copper Brass Zinc

  • Quality Graphite Material: made of quality graphite material, the ingot molds won't affect the metal purity during the metal refining process.
  • Fast cold and hot conditions, with good thermal stability, producing exquisite refining effect for you.
  • Detailed Size Information: the outside dimension of heart graphite casting mold is about 50 x 50 x 20 mm/ 1.97 x 1.97 x 0.79 inch, the inner is about 10 mm high.
  • The cross graphite casting mold is about 88 x 47 x 8 mm/ 3.45 x 1.85 x 0.31 inch, the inner is 63 x 38 x 4 mm/ 2.48 x 1.5 x 0.16 inch.
  • The star graphite casting mold is 50 mm/ 1.97 inches in length and width, 11.45 mm/ 0.45 inch on each side, proper in size for you to cast metal and make your own jewelry.
  • Good Performance: the graphite molds for casting metal has nice thermal stability, which can withstand 2000 degrees Celsius, shorten the melting time and save energy, has good impact resistance and corrosion resistance to acid and alkali, good in performance to ensure the reliability of product quality.
  • A Wide Range of Application: the casting ingot mold has a wide range of application, suitable for experiments and melting of non ferrous metals, such as gold and silver, brass, copper, aluminum, zinc and so on, they can also be applied for test analysi....
Check Stock

Graphite Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass (40 x 40 x 45 mm, 1000 g Gold/ 500 g Silver)

  • Size information: the outside dimension is 50 x 50 x 50 mm and the inner is 40 x 40 x 45 mm, the capacity is about 1000 g gold or 500 g silver, general size can meet your most melting or casting needs for metals.
  • Durable material: the main material is graphite, hardly ash content ensures that the metal purity will not be affected during the metal refining process.
  • Fast cold and hot conditions, with good thermal stability, exquisite refining effect.
  • Nice performance: our casting ingot crucible mold has nice thermal conductivity, which can highly shorten the melting time and save energy, and withstand 2000 degrees Celsius, nice acid and alkali resistance, nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance, nice impact resistance performance to ensure the reliability of product quality.
  • Wide uses: this ingot mould is suitable for experiments and melting of non-ferrous metals, such as gold, silver, brass, copper, aluminum zinc, lead and so on, also can be applied as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mold and other purposes.
  • Taking the size of the product into account, small-capacity metal melting are more suitable.
  • Package contents: you will get 1 piece of gra....
Check Stock

Piscifun Viper X Spinning Reel - Ultralight 5.2 1 High Speed Spinning Fishing Reel 10+1BB Carbon Fiber 33 LB Max Drag,1000 Series

  • Lighter & Stronger - Based on high quality graphite material, new mould technology was applied for the Viper X fish reel on frame and rotor. This....
  • Multiple Retrieves - The Piscifun Viper X spinning reels features a lightning fast 6.2:1 gear ratio as well as a buttery smooth 5.2:1 in our 500,1000....
  • Smooth & Consistent - Double shielded 10+1 stainless steel bearings provide incredible smoothness for the Viper X fishing spinning reels. The....
  • Increased Waterproof - Innovative Waterproof Tech including the one way clutch bushing, one way clutch plate, stainless steel washer and shielded....
  • Unbeatable Affordable - Tiny details highlight premium quality. Such as the high density EVA knob, CNC machined braid ready spool and exquisite....
Check Stock

Megatron 4\ Diamond Cup Grinding Removing Disc Wheel for Concrete, Paint, Epoxy, Glue and Mastic with CDB Newest Technology (Megatron 4\)

  • CDB Technology - Cluster Diamond Brazing Technology, a new concept and invented technology of diamond segment production. The purpose of CDB product is to make high level grinding & coating removal, through molecular sintering method..
  • HIGH LEVEL GRINDING & COATING REMOVAL - Optimized design for high performance on grinding & coating removal. Works for concrete, asphalt, epoxy coating, tile glue, urethane and paint. Feel the finest surface grinding and removing..
  • FAST & LONG-LIFE - Longer working life with fast removing speed enables easy work and less working fatigue..
  • SPECIAL SHAPE & ANGLE DIAMOND BEADS - Excellent grinding & removing process by special shaped & angle diamond beads.
  • CLUSTER DIAMOND BRAZING TECHNOLOGY - Molded sintering and Single layer brazing creates solid shape brazed diamond tools. Molded diamond segments shows excellent performance with long-lasting life..
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock