Reviews Granite Cutting Blades

QiNiuTools 3\ 76mm Dry Cutting Granite Continuous Diamond Circular Blade Cutting Disc Saw Blade

  • Diamond blades increase the density of diamonds and use higher-grade diamonds, which have high strength and are not easily deformed..
  • Granite saw blade adopts hot pressing process, combined with high-quality raw materials, to ensure the low amplitude and low noise of the product during high-speed operation..
  • Diamond blades can be used for both dry and wet, improving the diamond cutting speed..
  • Concrete blade adopts the design of turbine teeth and widens the cutter head, so that the cutting speed is faster and the performance is stable..
  • Saw blades are designed to improve efficiency and excellent performance, and can provide fast and smooth cutting in bricks, pavements, concrete, granite, quarries and other stones..
Check Stock

Makita 2 Pack - 4” Continuous Diamond Blades For 4”+ Grinders & Circular Saws - Precise Cutting For Tile, Porcelain & Stone - 5/8”, 20mm & 7/8” Arbors

  • ...Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for the best Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry | For Best Results, consider using Water to flush out debris and Extend Blade Life.
  • ✅ PRECISELY & EASILY CUT Marble, Granite, Stone, Glass, Porcelain & Ceramic Tile, including Flagstone & PermaBase with Minimal Material Crack OR Shatter Risk | TURBO & SEGMENTED Steel blades are ideal for FASTER and LONG-LASTING Cuts in General Concrete & Non-Tile/Stone Masonry.
  • ✅ AVOID BLADEWEAR Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear.
  • ✅ DESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, Tile, Granite, Stone & general industrial applications, these blades are Quality tested and laser welded for unsurpassed blade integrity, planned to outperform other blades in its class | Each blade is engineered to work at 15,300 RPM at a 1 Inch maximum cutting depth.
Check Stock

SHDIATOOL Diamond Saw Blades Cutting Discs Set Segmented Cutter Wheel for Tile Ceramic Porcelain Marble 7/8\ or 5/8\ arbor 6 Pieces 4-1/2 Inch

  • Wet or dry cutting, For 7/8" or 5/8" Arbor(Adapter included for 5/8"),sutiable for angle grinder.
  • Blades Kit contains: continuous tile blade/segmented concrete disc/turbo rim granite saw bladeper 2 pieces.
  • 2 pieces continuous rim wheel For Smooth cutting of Tile,Ceramic,Marble,Granite.
  • 2 pieces segmented rim For Fast general purpose cutting for Concrete,Paver,Masonry,Terrazzo,Stone.
  • 2 pieces turbo rim For smooth & fast cutting of Granite,Stone,Masonry,Terrazzo,paver,Concrete.
Check Stock

WHIRLWIND USA LSS 5-Inch Dry or Wet Cutting General Purpose Power Saw Segmented Diamond Blades for Concrete Stone Brick Masonry (5\)

  • LSS diamond blades increase the density of diamonds and use higher-grade diamonds, which have high strength and are not easily deformed.
  • LSS granite saw blade adopts hot pressing process, combined with high-quality raw materials, to ensure the low amplitude and low noise of the product during high-speed operation.
  • LSS diamond blades can be used for both dry and wet, improving the diamond cutting speed and there are more sizes for selection.
  • Segment height 10mm. Arbor 7/8"-5/8". Size is 5"x.070"x.395"/10mm..
  • LSS concrete blade adopts the design of turbine teeth and widens the cutter head, so that the cutting speed is faster and the performance is stable.
  • LSS saw blades are designed to improve efficiency and excellent performance, and can provide fast and smooth cutting in bricks, pavements, concrete, granite, quarries and other stones.
Check Stock

SHDIATOOL 3 Pieces 4-1/2 Inch Diamond Saw Blades Cutting Discs Set for 7/8\ or 5/8\ Arbor

  • Wet or dry cutting, For 7/8" or 5/8" Arbor(Adapter included for 5/8").
  • Blades Kit contains: continuous/segmented/turbo rim per 1 piece.
  • 1 piece continuous rim For Smooth cutting of Tile,Ceramic,Marble,Granite.
  • 1 piece segmented rim For Fast general purpose cutting for Concrete,Paver,Masonry,Terrazzo,Stone.
  • 1 piece turbo rim For smooth & fast cutting of Granite,Stone,Masonry,Terrazzo,paver,Concrete.
Check Stock

WHIRLWIND USA LSS 14 Inch Diamond Saw Blade,Dry or Wet Cutting Concrete Saw Blades for Sharp Cutting Concrete Marble Granite Brick Masonry,Broadened Cutter Head

  • Diamond blades increase the density of diamonds and use higher-grade diamonds, which have high strength and are not easily deformed.
  • Granite saw blade adopts hot pressing process, combined with high-quality raw materials, to ensure the low amplitude and low noise of the product during high-speed operation.
  • 14 inch Diamond blades can be used for both dry and wet, improving the diamond cutting speed and there are more sizes for selection.
  • Segment height 10mm. Arbor 1 inch -20mm . Size is 14"x.125"x.395"/10mm..
  • Concrete blade adopts the design of turbine teeth and widens the cutter head, so that the cutting speed is faster and the performance is stable..
  • Saw blades are designed to improve efficiency and excellent performance, and can provide fast and smooth cutting in bricks, pavements, concrete, granite and quarries.
Check Stock

TOOLEAGUE Diamond Saw Blade, 4-1/2 inch Super Thin Tile Blade, Diamond Cutting Wheel for Cutting Porcelain Tile Granite Marbles, 10 Pcs

  • CUTTING DISC SIZE: 115 x 10 x 1.2 x 22.23 mm, thickness: 1.2 mm, outer diameter: 115 mm/4.5 inches..
  • APPLICATION: Diamond saw blades are specially designed for cutting porcelain, ceramic tiles, granite, sandstone, marble, brick, slate, and cement liners..
  • HIGH QUALITY: High-quality ceramic tiles require high-quality blades and high-quality cutting blades to provide you with a fast, precise, smooth, and chip-free cutting experience. And it will not harm your tiles, nor will it break..
  • SPECIAL DESIGN: The new generation of X gear rim design can speed up the cutting speed, ensure longer service life. It can be dry-cut and wet-cut, and the cutting effect is better with water..
  • APPLICABLE MACHINES: suitable for most tile saws with 7/8" or 5/8" blades, hand-held angle grinders, and hand-held cutters..
Check Stock

BOSCH DB766 Rapido Premium Continuous Rim Diamond Blade for Porcelain Tile 7 In.

  • Designed for porcelain, granite, and marble applications.
  • Special diamond mix features high-quality industrial diamonds and specialized distribution for the best performance in hard porcelain tile.
  • Flexibility in cutting blades is suitable for both wet and dry cutting.
  • Application focused: these blades are fine-tuned specifically to provide clean cuts in porcelain tile.
  • Precision manufacturing: optimized blades for low vibration and improved blade life.
Check Stock

DT-DIATOOL Turbo Mesh Diamond Blade 10 Inch with X Rim Segment for Tile Porcelain Ceramic

  • QUALITY MATERIAL: Gunpla diamond cutting blades are manufactured with high quality and durable heat-treated manganese steel and diamond. This angle grinding set has 3 of the most used cutting saws to make sure you are always ready for any project..
  • 3 PIECES SET: The includes 1 continuous rim for smooth cutting of marble, granite, tile & ceramics, 1 segmented rim for fast cutting for masonry, concrete, pavers, terrazzo, roof tile and 1 turbo rim diamond cutting saw blade..
  • CONVENIENT CUTTING: Fashioned to provide exceptional and efficient cutting performance, Gunpla diamond grinding saw blades ensure quick and precise cuts with clean and perfect results..
  • PERFECTLY HONED: Our cutting diamond blades perfectly sharpened to ease use and can be used several times before any new honing. They have a thinner kerf that favors increases the cutting speed and minimize dust..
  • IDEAL FEATURES: Diameter: 115mm (4.5inch).
  • Arbor size: 7/8 inch(22.2mm) with reduce ring 5/8 inch(16mm).
  • Speed max. 80m/s and can used dry or wet. Balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

Benchmark Abrasives 14\ Turbo Combo Diamond Blade with Steel Core, Saw Blades for Angle Grinder, Cutting Porcelain Ceramic Tile Granite Concrete Marble

  • Benchmark Abrasives diamond saw blades are ideal for cutting concrete, roofing tile, stone ceramic, granite, marble, and other hard materials, etc..
  • The turbo combo diamond blade is designed with a steel core and suspended diamond metal matrix technology. It helps to perform cutting fast and smoothly..
  • High-performance blades support all models of saws. It is used with high-speed saws. Durable blades are ideal to use for dry or wet cutting applications..
  • Efficient diamond blades are used in automotive, transportation, by professional contractors and DIY users, foundries, construction, welding, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Makita E-02624 5\ Diamond Blade, Turbo, Hard Material

  • Taller 13mm segments are designed for longer life and faster cutting.
  • Up to 4x longer life than competitive blades.
  • Hard material blade for cutting concrete, granite, stone and fire brick.
  • Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade.
  • Carefully tensioned for less vibration and a superior user experience.
Check Stock

SHDIATOOL Metal Cutting Diamond Blades Set of 2 Pieces

  • 1PC Metal Cutting Diamond Disc plus 1PC All Purpose Metal Cutting Blade.
  • Metal Cutting Diamond Discs are specially designed for cutting steel tube, iron rebar (Less than dia 25mm), angle steel.
  • All Purpose Metal Cutting Blade has Wide Application - Granite, Marble, Aluminum, Steel, Wood....
  • No risk of break of disc,so much safer than abrasive cut-off wheel.
  • Blades are made with high hardness diamond, could be used for cutting all ferrous and non-ferrous metals, with a Lower Cost per Cut.
Check Stock

Benchmark Abrasives 14\ Segmented Diamond Blade with Steel Core, Saw Blades for Angle Grinder, Cutting Brick Ceramic Tile Granite Concrete Marble

  • Benchmark Abrasives 14" diamond saw blades are ideal for cutting concrete, roofing tile, stone ceramic, granite, marble, and other hard materials, etc..
  • The segmented diamond blade is designed with a steel core and suspended diamond metal matrix technology, which helps to perform cutting fast and smoothly. High-quality construction with improved blade design ensures operations without vibrations..
  • High-performance blades support all models of saws. It is used with high-speed saws. Durable blades are ideal to use for dry or wet cutting applications..
  • Efficient diamond blades are used in automotive, transportation, by professional contractors and DIY users, foundries, construction, welding, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock