Reviews Gpu Screws

Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket Anodized Aerospace Aluminum Single Slot Cards Support，Safe Without Magnet（Black）

  • ★ LASTING PROTECTING GPU CARD: this GPU support bracket is specially designed to protect and support the graphics card/GPU cards, prevent the....
  • STURDY AND STABLE GPU BRACE SUPPORT: this GPU support bracket made of all aviation aluminum with oxidation treatment, far stronger and last longer....
  • ★ TOOL-FREE INSTALLATION: easy to mount and adjust the height,.Tool-less screws are used for fixing the support module. The support module is....
  • ★MAGNET-FREE DESIGN: There is No maget for the the whole product, which will not hurt your Disk,No impact on the electromagnetic environment of your....
  • ★SLIDING TRACK DESIGN: the GPU support bracket main part is the vertical aluminum cylinder, which works as a track, and it will allow the supporting....
Check Stock

8 GPU Mining Rig Frame with Mining Motherboard/SSD/RAM/CPU/Cooling 4 Fans ,Crypto Ethereum Mining Rig Case 8 GPU Slots for Cryptocurrency Bitcoin/Crypto ETH Miner (Without GPU and PSU)

  • ...therboard design is great, the overall size of the chassis is 27.55in*15.75in*6.69in..
  • 【ETH Mining rig case Including】:motherboard, Intel CPU (with CPU cooling plate*1), power cord, 128GB mSATA SSD, 4G DDR 3, 5200 rpm cooling fan * 4, 8*(6+2)Pin graphics power cable (motherboard and fan power,all cables are 12V),screws*12, power switch cord*1. Compatible with Linux/windows/OS system (You need to install the system yourself) ,Without GPU and PSU..
  • 【Important Note 5 points】: 1. Our mining rig case does not have GPU installed and requires you to install your GPUS. 2. It fits most GPUs (except 3060), and the length of the GPU cannot exceed 34cm. 3. You need to reinstall the system. 4. The mining machine system does not come with instructions. 5. It is the best choice to place a 4U power supply in the power supply position (it is recommended that you purchase a 4U silent power supply), and it must be a single-channel power supply..
Check Stock

75MM T128010SU 0.35A Cooling Fan for Gigabyte AORUS GTX 1060 1070 1080 G1 GTX 1070Ti 1080Ti 960 970 980Ti Video Card Cooler Fan (A Set)

  • 85mm diameter of the fan , 40mm screws mount hole pitch, please check your own fan before buy it, please questions please contact us..
  • Suitable For MSI RTX 3070 VENTUS 3X Graphics Card.
  • Suitable For MSI RTX 3090 VENTUS 3X Video Card.
  • Please keep the screws from your own GPU , the fan not come with any screws.
Check Stock

inRobert RTX2080 GPU Fan Replacement for Zotac RTX 2080 Ti AMP Graphics Card Cooling Fan (Full Set)

  • With big screw mount hole, please check our photos..
  • The GPU Fan Compatible For ZOTAC GAMING GeForce RTX 2080 Ti AMP.
  • The Video Card Fan Compatible For ZOTAC GAMING GeForce RTX 2080 AMP 8GB.
  • The Graphics Card Fan Replacement do not come with any screws, please keep your own screws from your GPU..
  • Contact us if you have any questions or you buy wrong fan, we will send you correct fan..
Check Stock

inRobert 10cm 4Pin Graphics Card Fan Replacement for Sapphire Nitro Radeon R9 380 380X Video Card Cooling Fan (Black-1pc)

  • Suitable for Sapphire Nitro Radeon R9 380 GPU.
  • Suitable for Sapphire Nitro Radeon R9 380X GPU.
  • Contact us if you can not make sure which fan for your video card, Contact us if you buy wrong fan before return it..
  • The fan not come with any screws , please keep your own screws from your Video Card..
Check Stock

inRobert 85mm R9 390X GPU Cooling Fan for Sapphire Radeon R9 390 Nitro/R9 290X Tri-X Graphics Card Fan

  • We are professional on graphics card fan , if you do not know which fan for your GPU, please feel free to contact us..
  • Suitable For SAPPHIRE Radeon R9 390X 8GB Tri-X.
  • Suitable For SAPPHIRE Radeon R9 390 8GB NITRO.
  • Suitable For Sapphire Radeon R9 290X Tri-X OC.
  • The fan do not come with any screws, please keep the screws from your own GPU..
Check Stock

inRobert 10cm 4Pin Graphics-Card-Fan-Replacement for Sapphire-NITRO-Radeon-R9-380-380X-Video-Card-Cooling-Fan Black-2pcs

  • Suitable for Sapphire Nitro Radeon R9 380 GPU.
  • Suitable for Sapphire Nitro Radeon R9 380X GPU.
  • Contact us if you can not make sure which fan for your video card, Contact us if you buy wrong fan before return it..
  • The fan not come with any screws , please keep your own screws from your Video Card..
Check Stock

inRobert DIY GAA8S2U Graphic Card Cooler Fan for ZOTAC GeForce GTX 1080 Ti AMP Edition GPU ZT-P10810D-10P

  • important: This is DIY fan , but can work. Please measure the fan from your own GPU, make sure the size , screw mount hole pitch are same as our fans..
  • Suitable for ZOTAC GeForce GTX 1080 Ti AMP Edition (ZT-P10810D-10P).
  • Suitable for ZOTAC GeForce GTX 1070 Ti AMP Edition (ZT-P10710C-10P).
  • The fan do not come any screws , please keep your own screws from your GPU.
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame, 70mm Mining Machine System & Platform, Barebone Motherboard for ETH with 4 Cooling Fans, Miner Frame Case with SSD, RAM (Without PSU/GPU)

  • ...ve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 4 , 6 PIN cable to (6 + 2) Pin * 8pcs, screws ​​package. Compatible with Win10 /iOS, but you'll need to install the system yourself. (Graphics cards longer than 320mm cannot be used.).
  • Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
  • Note - The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply to work, and our motherboard only supports single power supply. If you want to use a multi-channel power supply, you need to short-circuit it. Please feel free to contact us if you have any questions..
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock

SUOHUI GPU Mining Rig Complete System for Ethereum Classic ETC, ETH, RVN, Flux, Ergo Crypto Miner with 8 GPU Mining Motherboard,PSU, RAM,SSD, Stackable Mining Frame Machine(Without GPUs)

  • 【Stackable Frame Mining Machine】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being overshaped. The open-air frame ensures that the graphics card is not limited in length. You can easily stack multiple SUOHUI mining rigs at will without covering too much space..
  • 【8 GPU Mining Motherboard】: Our mining rig has installed a 8 GPU slots mining motherboard with SSD,RAM,CPU. 65mm spacing provides enough space between GPUs, suitable for AMD/NVIDIA GPUs. Note: The width of GPUs should not exceed 65mm..
  • 【1800W Stable Mining Power Supply】:This mining power supply uses 4U PSU rated output 1800W 12V full-voltage, can work under (110-220v）.10 long-line cables with 16x8 (6+2) pins and 6x6 pins, which can powers the mobo and GPU directly. Effectively improve conversion efficiency and reduce power loss..
  • 【4*4500rpm Silent Cooling Fans】4*4500rpm GPU cooling fans, professional silent design with adjustable fan speed controller, fully accelerating airflow to achieve the ultimate cooling effect. Let you easily enjoy the fun of mining at home..
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • ... escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use.Compatible with Win10 /OS, but you'll need to install the system yourself..
  • 【Kindly Note】The new version of mining case has 5 USB ports, enough for daily work. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating. The miner machine system doesn't come with GPU. Our products have undergone strict quality inspection before leaving the factory. If you encounter any problems during use, please feel free to contact us..
Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 Z690 Tested] Shielded Gaming PCI Express Gen4 Reverse PCIE Connector w/ 270 Degree Socket {24cm} Compatible with NZXT H1 Without Screw

  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets. (Compatible with NZXT H1).
  • Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount.
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
  • Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases.....
Check Stock