Reviews Gprs Software- BestItemr.com

Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V

Computer debugging USB--TTL. This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply must be able to supply 2A. The reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers..
Make sure your SIM card is not locked. The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default). Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..

Supports NGFF (M.2) KEY B cards or modules of type 30*42..
Supports M.2 card (Socket 2 SSIC-base WWAN) with USB port, such as 2G GSM, GPRS, 3G, CDMA, WLAN, WWLAN, HSPA MODEM, GPS, 4G WiMAX, LTE, Mini Card to desktop/Laptop PC, for example, for MU736/ME936/ME906V, for Sierra Wireless Airprime EM7305..
Easy installation requires no drivers, but make sure that your M.2 card or module is equipped with software drivers..
No external power supply required, and supports hot plug. Strong compatibility, for.
WindowsXP/Win7/Win8/Win8.1/Win10, for WinCE, for Linux/iMAC, etc..

1.Doesn’t support PCI-E bus type minicard such as Wifi module, only supports USB bus interface of Mini-Cards such as 2G GSM, GPRS, 3G, CDMA, WLAN, WWLAN, HSPA MODEM, GPS, 4G WiMAX, LTE, and Mini-Card to desktop PC.
2. Easy installation & no driver required, but make sure you have installed the software drivers for your WWAN card..
3. Support SIM 6pin/8pin card connector..
5. Supports Plug & Play and Hot-Swapping.

Computer debugging USB--TTL. This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply must be able to supply 2A. The reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers.Speaker and Headphone jacks..
The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default).Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
GPRS multi-slot class 10/8.GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz).Class 1 (1 W @ 1800 / 1900MHz).Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands..
Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).Embedded TCP/UDP stack - allows you to upload data t....

Mini GSM / GPRS breakout board is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission..
The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode..
It communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands..
AT command interface with "auto baud" detection..
TTL serial port for serial port, you can link directly to the microcontroller.

2.Doesn’t support PCI-E bus type minicard such as Wifi module, only supports USB bus interface of Mini-Cards such as 2G GSM, GPRS, 3G, CDMA, WLAN,....
3.Easy installation & no driver required, but make sure you have installed the software drivers for your WWAN card.
5. Supports Plug & Play and Hot-Swapping.

Supports USB interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, Mini Card to desktop/Laptop PC, such as, HUAWEI MU736/ME936/ME906V, Sierra Wireless Airprime EM7305.
Easy installation & no driver required, but make sure you have installed the software drivers for your M.2 card..
Support 30*42 type NGFF(M.2) Key B card,Support SIM 6pin/8pin card connector..
Supports Plug & Play and Hot-Swapping,Supports any OS, like Windows, WinCE, Linux &iMAC etc.

【Network Card】For LTE 700/AWS, for WCDMA 850/1900/2100 MHz, for EDGE/GPRS/850/900/1800/1900 MHz..
【Function】Support multiple input / multiple output (MIMO), convenient for LTE applications.Multi-mode capability ensures connectivity and support for roaming..
【Stable Speed】The download speed is up to 100Mpbs and the upload speed is up to 50Mpbs..
【Professional】Support for Gobi for API. Comprehensive SDK and software license for Linux and for Windows..
【Tip】Any questions,Please feel free contact us,we will provide you with high quality after-sales service..

The download speed is up to 100Mpbs and the upload speed is up to 50Mpbs..
Multi-mode capability ensures connectivity and support for roaming. Standard form factor simplifies engineering and reduces production process costs..
Support multiple input / multiple output (MIMO), convenient for LTE applications. Support for Gobi for API..
Comprehensive SDK and software license for Linux and for Windows..
For LTE 700/AWS, for WCDMA 850/1900/2100 MHz, for EDGE/GPRS/850/900/1800/1900 MHz..