Reviews Glow Plug Ignitor

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

HobbyPark RC Nitro Car Starter Kit for 1 8 1/10 Scale Monster Trucks Off Road Buggies

  • ✔Made by HobbyPark, Compatible with Traxxas/ HPI / Team Associated / Redcat Racing / Axial / Exceed RC / Losi / RC4WD / HSP / Himoto /....
  • ✔Require AA Battery. The Glow Plug Igniter come WITHOUT A Battery..
  • ✔Package include: Glow Plug Ignitor (AA Battery Type) & Charger/Fuel Bottle/Hex Crosses Wrench and Screw Drivers.
  • ✔Great Value Tools Kit Set, A must have for RC Hobby Players.
  • ✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable.
Check Stock

GLOBACT RC Glow Plugs 70117#3 N3 Hot Spark Nitro Engine Parts Replace OS 8 for Traxxas Redcat Kyosho HSP HPI 1/8 1/10 Scale RC Nitro Car Truck Buggy (4Pcs)

  • ✔️【Compatibility】Suit for Traxxas T-Maxx 3.3 EB-4 thunder tiger stock Redcat SHOCKWAVE, TSUNAMI, VOLCANO STX, TORNADO S30, VOLCANO S30, AFTERSHOCK 21, HURRICANE XL, AFTERSHOCK 3.0, AFTERSHOCK 3.5, BACKDRAFT 3.5, CALDERA 3.0, EARTHQUAKE 3.0, EARTHQUAKE 3.5, HURRICANE XP, LANDSLIDE 21, LANDSLIDE LT, MAELSTROM LT, MONSOON XP, SANDSTORM 21, SANDSTORM LT, TWISTER LT, TYPHOON XP, REACTOR RS 3.3, VOLCANO MX, VOLCANO SV, VOLCANO T2, VORTEX SS, TORNADO BB, Kyosho..
  • ✔️【Easy to Upgrade】Compatible with replacing OS #8 Traxxas 3232X TRX 2.5, 2.5R, and 3.3 engines, HSP 70117 N3 Redcat 70117H, 1/8 1/10 Scale RC nitro car truck buggy, For 4c Engines 5% - 40% Nitro Fuels..
  • ✔️【High Quality】Hot Glow Plug is made of steel for durability..
  • ✔️【Notice】 It should be noted that when the igniter is ignited, do not insert it in the Ignitor for too long, try not to exceed 10 seconds, To avoid damage to the glow plug..
Check Stock

767A-380 44744-2 601 41-604 for Norton Igniter White Rodgers Furnace Ignitor XBM

  • 767A-378 Furnace Hot Surface Ignitor for Norton 601 601TB 20165702.
  • Hot Surface Furnace Ignitor stock # 767A-378..
  • This igniter replaces Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
  • This Ignitor has a 2-1/4" long from bracket to end of ignitor..
  • 5" Wire Leads with Plug, wire nuts included..
Check Stock

Lipo Charger,Battery Charger Balance Charger Discharger with Power Supply for LiPo/Li-ion/Life Battery 1-6S ,NiMH/NiCd 1-15S ,PB 2-24V ,Smart Battery Lipo Battery Charger

  • For sale is 19 in 1 rc multifunction balance charging cable,perfect fit for RC Car Truck Lipo Charging.Suitable for RC airplane, rc quadcopter and rc....
  • Output Plug: TRX Style Plug, Tamiya Style Plug, Mini Tamiya Style Plug, Glow Ignitor, EC3, EC5, XT60,JR TX, JST,Deans Ultra-type, Mini Deans....
  • 19 in 1,used for different kinds of batteries,save you time and money when you are paying attention on what connectors you are getting for your....
  • Attention:Red is positive and Black is negative,so please pay attention to correct use of this multi charger adapter.
Check Stock

767A-378 White Rodgers Furnace Hot Surface Ignitor for Norton 601 601TB 20165702

  • 767A-378 Furnace Hot Surface Ignitor White Compatible with Norton 601 601TB 20165702.
  • Includes (1) Furnace Hot Surface Ignitor as pictured.
  • Part number # 767A-378. This igniter Compatible with Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
  • This Ignitor has a 2-1/4" long from bracket to end of ignitor. 5" Wire Leads with Plug, wire nuts included. 120V..
Check Stock

Space Heater Photocell PP236 M16656-24 for Reddy Remington Master Knipco Heaters Parts Replacement

  • PP236 M16656-24 Photocell for Reddy Remington Master Knipco Heaters Parts.
  • for DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, TSC: (PP236, M16656-23, M1665623, M16656-24, M1665624).
  • PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-016-1010, 710161010).
  • This photocell is used with heaters that have the hot surface ignitor (glow plug). UNLESS you have the DESA upper tier heaters that have the plastic handle and shroud that covers the fuel tank. That photocell is part M16656-21.
Check Stock

ZFLXH Space Heater Replacement Parts PP236 Photocell For Reddy Remington Master Knipco Heaters M16656-24

  • ⭐PP236: Photocell Assembly should be used with 104068-02 ignition control boards on oil fired heaters..
  • ⭐This photocell is used with heaters that have the hot surface ignitor (glow plug). UNLESS you have the DESA upper tier heaters that have the plastic handle and shroud that covers the fuel tank. That photocell is part# M16656-21.
  • ⭐PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-016-1010, 710161010).
  • ⭐DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, and TSC: (PP236, M16656-23, M1665623, M16656-24, M1665624).
Check Stock

Pro-Parts New Replacement PP236 Photocell Heaters for Reddy Remington Master Knipco DESA M16656-24

  • PP236: Photocell Assembly should be used with 104068-02 ignition control boards on oil fired heaters..
  • Apply to DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, and TSC: (PP236, M16656-23, M1665623, M16656-24, M1665624) PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat.
  • This photocell is used with heaters that have the hot surface ignitor (glow plug). UNLESS you have the DESA upper tier heaters that have the plastic handle and shroud that covers the fuel tank. That photocell is part# M16656-21.
  • A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable)..
Check Stock

WB13K21 GE Compatible Replacement Oven Range Flat Igniter Norton 501A 229C5216P001 Ignitor

  • 2 prong molex plug end on it. 2 porcelain wire nuts are included.
  • The wire leads measure 8″ long to end of plug.
  • The ceramic bar measures 1.5″ long & metal shield around ignitor.
  • It is a replacement Norton 501A, 229C5216P001, WB13K21, WB13T10045, AP2020569, AP3202322, PS231280 and PS952863.
Check Stock

Furnace Ignitor Igniter Directly Replaces Rheem 62-22868-02

  • Made from high-purity recrystallized silicon carbide (crystar) which combines physical and thermal strength with stable electrical properties.
  • Designed to reach ignition temperature(s) within 17 seconds.
  • Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity.
  • Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection.
  • Operate at 120 vac. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120 vac..
Check Stock

Pertronix D186604 Flame-Thrower VW Type 1 Engine Plug and Play Non Vacuum Cast Electronic Distributor with Ignitor Technology

  • All new lightweight cast aluminum housings.
  • Tailored advance curve for optimal performance and driveability.
  • Integrated Ignitor electronic ignition delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
  • Rotating cobalt magnets trigger a Hall Effect integrated circuit which enables precise timing.
  • High dielectric strength cap with brass terminals.
  • Tailored advance curve for optimal performance and driveability. 2:1 improvement over points in current fall time for increased coil output.
Check Stock

Gekufa Grill Hot Rod Ignitor Kit with Fuse Compatible with Traeger, Pit Boss, Camp Chef Wood Pellet Grills (Pack of 2)

  • 【COMPATIBILITY】Replacement hot rod ignitor kit compatible with all Traeger wood pellet grill models (EXCEPT PTG) : Traeger 070, 075, Texas Elite Series, Pro 22, Pro 34, Lil Tex Elite Series, BBQ Series ,Pit Boss 700 700FB 70112 820 820D 820Pro. It also fits for Camp Chef wood pellet grills..
  • 【POWERFUL FUNCTION】This grill hot rod ignitor ignites the hardwood, making starting your grill as simple as flipping a switch. And it keeps fire going, get delicious flavor with hardwood fuel..
  • 【EASY INSTALLATION】It can be installed easily, plug and play wiring. You just need to took about 10 minutes to replace. Located at bottom of firepot, for proper installation, only 1/8-1/4 inch should be showing in firepot..
  • 【DIRECT REPLACEMENT】When your current hot rod shortens or burns out, this hot rod ignitor kit replacement part will ensure that your grill continues to operate effectively..
  • 【PERFECT FIT】High density cartridge heating element, 200W/120V-24" wire lead, 5A/250V fuse, identical match to the OEM hot stick..
Check Stock