Reviews Gloss Coating

Epox-It 80 Clear Epoxy Resin for Coating Wood Table Tops Bar Top Resin Art - 10 Gallon Kit

  • This is a 10 Gallon Kit. You will receive 5 Gallons of Side "A" and 5 Gallons of Side "B"DescriptionCrystal Clear Bar & Table Top Epoxy Resin For Coating Wood Tabletops.
  • Epox-It 80 is a multi-purpose high gloss clear epoxy resin. Epox-It 80 is used for coating bar tops, tabletops, coating counters, encapsulation, resin art, resin painting, fiberglass laminating, casting clear models, prototypes, jewelry, figurines, etc.. This is a two part professional grade clear epoxy resin that will produce a super gloss finish on a variety of surfaces. Instructions Included with every order..
  • Note: UV inhibitors have been added to the Epox-It 80 to resist yellowing better than most other epoxies. The fact is that all epoxy resins will yellow over time in direct sunlight some are better than others. Direct sunlight should be avoided to prolong the clarity of the resin..
  • Complies with FDA CFR 177.2600 (Indirect Food Contact).
  • Why Buy Old Out Of Date Resin When You Can Purchase Directly From The Manufacturer And Receive Fresh Material Every-Time.
  • Direct From The Manufacturer (Always Fresh!).
Check Stock

Autokcan 10H Nano Ceramic Coating for Cars, 50ML High Gloss Anti-Scratch SiO2 Ceramic Coating Car Kit Hydrophobic Paint Sealant Protection with Gloves Two Years Warranty

  • ✱[SCRATCH PREVENTION]:Anti-scratch 10h nano ceramic coating,is able to cover automotive surface with high gloss crystal to prevent scratch perfectly.But it can’t remove the scratch already existed..
  • ✱[HIGH GLOSS LAYER]:After painted with car ceramic gloss coating,the protective sealant layer would protect your car from salt fog corrosion, bird drops, UV light, scratches, stone chips, iron powder and etc..
  • ✱[LONGER PERSISTANCE]:Our Hydrophobic Car Ceramic Coating would last up to 12 months at most on your car if u did a great prep work before coating..
  • ✱[PREP WORK IS IMPORTANT]:Correct prep work can make the coating last up to 1 year or longer.If possible,after washing the car totally,using a cutting compound to remove paint defects (scratches, swirls, oxidation etc).Then we use a polishing compound to remove any finer scratches and swirls.Finally we use IPA (Isopropyl Alcohol) to remove any waxes, greases, oils to make sure the ceramic coatings can properly bond to the surface..
  • ✱[NOTE]: Please don’t drive the car out after coating within 24hours.Use the degreasant would be okay in 15 minutes if u want to remove the nano coating for cars..
Check Stock

Nasiol NL272 Ultimate Scratch Defender, Paint Protection with 5-Year Durable Anti-Scratch, Nano Ceramic Coating Sealant for Cars, Trucks, Motorcycles, and Aircrafts, Car Detailing

  • The nano ceramic coating for cars chemical bonds to all types of car paint and lasts up to 5 years..
  • Car care products simple application saves time . Only one coatings is needed to achieve maximum durability and protection..
  • Car Ceramic Coating Sealant Multi-3-Layer technology enables the ceramic car coating to achieve the best performance with perfect bonding, 9H hardness, and incredible gloss rate, in addition to slickness with high hydrophobicity..
  • Auto Detailing Kit — ultimate ceramic car coating - all items you will need are in the kit: 50 ml Nasiol NL272 with application pads, gloves, 2 microfiber cloths, and other accessories for easy application..
  • Ceramic automotive coating car kit -Resistant to PH12 detergents, which enables the crystal gloss effect to last for longer periods of time. Can also be used on rims, plastic trim, headlights, bumpers, and piano blacks. High Gloss: Nasiol NL272 provides your car with a glossy shine..
Check Stock

ABP Touch Up Basecoat Spray Paint Compatible with Olympic White Relay Saturn (WA8624)

  • SMOOTH: Low gloss matte black powder coating.
  • INTERIOR & EXTERIOR: Superior protection against corrosion in matte black.
  • Versatility: Matte / Flat Black: UB-0116-L powder coating can be applied to various alloy substrates..
  • SAFE TO USE: UB-0116-L Matte Black powder coating Is non toxic..
  • PRODUCT PROPERTIES: UB-0116-L Black Urethane, Powder Coating, Cure Schedule: 10 Minutes @ 400°F or 15 Minutes @ 190°C, Coating Properties for UB-0116-L Black Urethane, Impact Direct: 80 in-lbs - Pass Impact Reverse: 80 in-lbs - Pass Gloss 60°: 003c 10 Thickness: 2.5-3.5 mils Pencil Hardness: 2H. Each pack filled with high-quality powder, each bag containing 5 Pounds of colored powder..
Check Stock

Autokcan Nano Ceramic Coating for Cars, 10H High Gloss 50ML Anti-Scratch SiO2 Ceramic Coating Super Hydrophobic Mirror Paint Sealant Protection With Gloves 2 Years Warranty

  • ✱[SCRATCH PREVENTION]:Anti-sratch 10h nano ceramic coating,is able to cover automotive surface with high gloss crystal to prevent scratch perfectly.But it can’t remove the scratch already existed..
  • ✱[HIGH GLOSS LAYER]:After painted with car ceramic gloss coating,the protective sealant layer would protect your car from salt fog corrosion, bird drops, UV light, scratches, stone chips, iron powder and etc..
  • ✱[LONGER PERSISTANCE]:Our Hydrophobic Car Ceramic Coating would last up to 12 months at most on your car if u did a great prep work before coating..
  • ✱[PREP WORK IS IMPORTANT]:Correct prep work can make the coating last up to 1 year or longer.If possible,after washing the car totally,using a cutting compound to remove paint defects (scratches, swirls, oxidation etc).Then we use a polishing compound to remove any finer scratches and swirls.Finally we use IPA (Isopropyl Alcohol) to remove any waxes, greases, oils to make sure the ceramic coatings can properly bond to the surface..
  • ✱[NOTE]:Please don’t drive the car out after coated within 24hours.Use the degreasant would be okay in 15 minutes if u want to remove the nano coating for cars..
Check Stock

Deft 37125015138 Lacquer Sanding Sealer Spray, 12-Ounce

  • Ideal for use on interior/exterior surfaces including plaster, masonry, wood, metal and unglazed ceramic.
  • Acrylic formula offers an ultra-hard, high luster finish with fast cure and hardening time compared to regular paint.
  • Dries to the touch in 20 minutes, covers up to 7 sq. ft. per can.
  • Durable coating can sanded and recoated for a higher gloss finish.
  • Provides a smooth, ultra gloss coating for a professional, factory finish look.
Check Stock

Rust-Oleum 1906830 Lacquer Spray, 11-Ounce, Gloss Clear

  • Ideal for use on interior/exterior surfaces including plaster, masonry, wood, metal and unglazed ceramic.
  • Acrylic formula offers an ultra-hard, high luster finish with fast cure and hardening time compared to regular paint.
  • Dries to the touch in 20 minutes, covers up to 7 sq. ft. per can.
  • Durable coating can sanded and recoated for a higher gloss finish.
  • Provides a smooth, ultra gloss coating for a professional, factory finish look.
Check Stock

Deft 37125015138 Lacquer Sanding Sealer Spray, 12-Ounce Pack of 4

  • Weather and corrosion resistant coating protects exterior/interior surfaces like wood, metal, concrete, masonry and more.
  • Oil-based formula provides a durable protective coating with excellent rust prevention.
  • Dries to the touch in 2-4 hours and covers up to 90 sq. ft..
  • Excellent resistance to abrasion, fading and chipping.
  • Glossy finish provides a fresh shine to surfaces.
Check Stock

New Deft 017-13 12 Oz Spray Satin Lacquer Clear Wood Finish Sealer 7976293'

  • Ideal for use on interior/exterior surfaces including plaster, masonry, wood, metal and unglazed ceramic.
  • Acrylic formula offers an ultra-hard, high luster finish with fast cure and hardening time compared to regular paint.
  • Dries to the touch in 20 minutes, covers up to 7 sq. ft. per can.
  • Durable coating can sanded and recoated for a higher gloss finish.
  • Provides a smooth, ultra gloss coating for a professional, factory finish look.
Check Stock

1 qt Rust-Oleum Brands 7776502 Black Stops Rust Protective Enamel, Flat

  • Weather and corrosion resistant coating protects exterior/interior surfaces like wood, metal, concrete, masonry and more.
  • Oil-based formula provides a durable protective coating with excellent rust prevention.
  • Dries to the touch in 2-4 hours and covers up to 110 sq ft.
  • Excellent resistance to abrasion, fading and chipping.
  • Flat finish minimizes surface imperfections.
Check Stock

TotalBoat TotalGold Gold Metallic Paint (Pint)

  • ...AE Acrylic Enamel Paint Color, 1 Pint of AE3001 Wet Look Acrylic Hardener, 5 Pack of 190 Micron Nylon Automotive Strainers and a 5 Pack of Wood Paint Mixing Sticks..
  • The Restoration Shop (AE) Acrylic Enamel System is a Professional Easy-To-Use Single-Stage High Gloss Paint Coating System that is Designed for Overall Automotive Refinishing but is also used as a Fleet and Industrial Equipment Coating..
  • AE is an easy to spray fast-drying topcoat system that provides a long-lasting and very high gloss finish result. AE is a very durable, chemical and solvent resistant coating that also resists chipping, cracking, and UV ray fading..
  • Restoration Shop Products are Made in the U.S.A., and we formulate, manufacture, and distribute our products throughout the USA, unlike many competitors. Our superior coating products only use the highest quality ingredients, which allows our customers to achieve consistent, high-quality professional results on all their painting projects!.
Check Stock

DeVilbiss 803599 XXX-Large Coverall

  • ...includes 1 Gallon of AU Acrylic Urethane Paint Color, 1 Quart of AU4001 Wet Look Urethane Hardener, 5 Pack of 190 Micron Nylon Automotive Strainers and a 5 Pack of Wood Paint Mixing Sticks..
  • The Restoration Shop (AU) Acrylic Urethane System is a High-Performance Professional Easy-To-Use Single-Stage High Gloss Paint Coating System that is Designed for Overall Automotive Refinishing but is also used as a Fleet and Industrial Equipment Coating..
  • AU is an easy to spray fast-drying topcoat system that provides a long-lasting and very high gloss finish result. AU is a very durable, chemical and solvent resistant coating that also resists chipping, cracking, and UV ray fading..
  • Restoration Shop Products are Made in the U.S.A., and we formulate, manufacture, and distribute our products throughout the USA, unlike many competitors. Our superior coating products only use the highest quality ingredients, which allows our customers to achieve consistent, high-quality professional results on all their painting projects!.
Check Stock

Rust-Oleum 1904830-6PK Lacquer Spray Paint, 11 oz, Gloss White, 6 Pack

  • Ideal for use on interior/exterior surfaces including plaster, masonry, wood, metal and unglazed ceramic.
  • Acrylic formula offers an ultra-hard, high luster finish with fast cure and hardening time compared to regular paint.
  • Dries to the touch in 20 minutes, covers up to 7 sq. ft. per can.
  • Durable coating can sanded and recoated for a higher gloss finish.
  • Provides a smooth, ultra gloss coating for a professional, factory finish look.
Check Stock