Reviews Glock 1front Sight

Real Avid Glock Armorer Tool Kit: 2-in-1 Glock Gun Multitool with Glock Front Sight Tool, Glock Punch Down Tool and Glock Magazine Tool for Unloading, Disassembly & Maintenance I Compatible with Glock

  • MUST-HAVE ACCESSORIES FOR GLOCK: gun multitool for Glock, featuring Glock front sight tool, gun disassembly and pin removal tool, magazine unloader and Glock magazine disassembly tool.
  • EASY GUN DISASSEMBLY: 3mm punch makes a pin removal tool that fits all Glock gun pin sizes.
  • easily remove pins to disassemble your Glock gun to clean, modify, or maintain..
  • GLOCK FRONT SIGHT TOOL: magnetic 3/16′ hex hut driver fits Glock front sights.
  • change standard Glock sight and install Glock night sights or dedicated height sights..
  • GLOCK MAGAZINE TOOL: easily change magazine plate or disassemble OEM Glock magazine.
  • captures the spring for safe and easy cleaning.
  • INSTALL CUSTOM MAGAZINE PLATE: remove standard, black base plates and install color plate to match your custom Glock slide, Glock grip or Glock back plate.
  • GUN SAFETY: after using your Glock gun on the range, easily and safely unload the magazine with quick unload feature on the back of the tool.
  • FITS EVERY GLOCK GUN MODEL AND OEM GLOCK MAGAZINE: compatible with all generations of Glock 19, Glock 17, Glock 43, Glock 26, Glock 22, Glock 48, Glock 27, Glock 45, Glock 21, Glock 42, Glock 30, Glock 34, Glock 20, Glock 44 and more.
  • MAG TOOL DOES NOT WORK on extended base plates such as the Glock+ base plate found o....
Check Stock

RTMGOB No-Tritium Fiber Optic Sights for Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, 39 – Red Green Dot Fiber Optic Sights for Glock

  • 【Sights for Glock】: RTMGOB fiber optic sights for Glock. Pistol sights fit for Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, 39 sights, M.O.S models excluded. These accesories sights for Glock bring you more quick and accurate targeting and shooting experiences.
  • 【Contrasting & Bright Fiber Optic Sights】: The sights for Glock have encased bright red/green dots fiber optics, glow bright and contrasting light in the day time or bright environment, easy for you to acquire sights and focus. Also, the bright rings with contrasting colors around the front and rear sights make the sights stand out. These constrasting red/green dots and rings make sight and target acquisition easier and quicker.
  • 【Durable & Concealed Sight Design】：The sights, made of aluminum alloy, with solid construction, coating finished, strong and durable. The fiber optic capsule design is also a greart protection against erosion and other damages. Also, as small sights accessories for Glock, portable for you to carry, concealed from your target, fit standard holster, will not snag your clothing and holster.
  • 【Easy-to-mount Front & Rear Sights】: The front and rear sights can be mounted easily with proper tools. The rear sight can be drifted into your Glock slide, an....
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

RTMGOB No-Tritium Fiber Optic Sights for Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, 39 – Red/Green Dot Fiber Optic Sights for Glock (Green Dot Sights)

  • 【Sights for Glock】: RTMGOB fiber optic sights for Glock. Pistol sights fit for Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, 39 sights, M.O.S models excluded. These accesories sights for Glock bring you more quick and accurate targeting and shooting experiences.
  • 【Contrasting & Bright Fiber Optic Sights】: The sights for Glock have encased bright red/green dots fiber optics, glow bright and contrasting light in the day time or bright environment, easy for you to acquire sights and focus. Also, the bright rings with contrasting colors around the front and rear sights make the sights stand out. These constrasting red/green dots and rings make sight and target acquisition easier and quicker.
  • 【Durable & Concealed Sight Design】：The sights, made of aluminum alloy, with solid construction, coating finished, strong and durable. The fiber optic capsule design is also a greart protection against erosion and other damages. Also, as small sights accessories for Glock, portable for you to carry, concealed from your target, fit standard holster, will not snag your clothing and holster.
  • 【Easy-to-mount Front & Rear Sights】: The front and rear sights can be mounted easily with proper tools. The rear sight can be drifted into your Glock slide, an....
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Xaegistac Glock Tool Set All Metal Magazine Disassembly Tool w/Armorers Punch Tool & Front Sight Installation 3/16 Hex Tool for Glock Accessories GT08

  • HANDY GLOCK TOOL KIT: 1*Mag Disassembly Tool,1* Pin Punch Disassembly Tool,1*Glock Front Sight 3/16" Hex. Compatible with Most Glock Models. A Must....
  • HEAVY DUTY MATERIAL & STRONG HANDLE FOR A LONG SERVICE LIFE: All Metal Construction, Made From Machined Aircraft Aluminum with Steel Handle. Larger....
  • MULTIPURPOSE MAG DISASSEMBLY TOOL (MDT): Safely and Easily Removes All Flat Bottom Magazine Base Plates for Cleaning and Inspection Without Damaging....
  • GLOCK FRONT SIGHT REMOVAL & INSTALLATION COMBO Kit: 3/16" Hex Fits for Glock Front Sight Screws, Pin Punch Disassembly Tool for Removing All Pins on....
  • EASY TO REMOVE AND INSTALL : An Internal Magnet Tip to Easily Hold the Front Sight Screw Securely in Place. Solid and Perfect for Sight Removal or....
Check Stock

Trijicon GL02 Night Sight Installation Tool Kit for Glock Models

  • Installation tool kit for Trijicon Bright & Tough and HD Night sight sets for Glock models.
  • Not compatible with Trijicon Suppressor Sights or Glock 42/43 models.
  • Contents: Rear sight pusher tool and front sight screwdriver for the small retaining screw.
  • Does not work with Trijicon Suppressor Sights.
  • Trijicon night sight tool kit for Glock models.
Check Stock

BASTION Front Sight Tool & Pin Punch Tool Set for Glock | Sight Tool Fits Precisely for Removal & Installation | Pin Punch Makes Field Stripping Super Fast & Easy

  • WHAT YOU GET: 1 GLOCK FRONT SIGHT & 1 PIN PUNCH TOOL (2-in-1 COMBO KIT).
  • the Front Sight Tool works with ALL Glock models.
  • Pin Punch Tool is compatible with the following Glock models: G17 G19 G20 G21 G22 G23 G25 G26 G27 G28 G29 G30 G31 G32 G33 G34 G35 G36 G37 G38 G39..
  • FRONT SIGHT TOOL HAS PRECISE FIT FOR REMOVAL & INSTALLATION: Featuring magnetic tip aluminum driver, our sight tool ensures precise screw removal and installation of Glock front sights. Don’t risk scratching up your Glock with the wrong tool!.
  • PIN PUNCH TOOL MAKES FIELD STRIPPING GLOCK SUPER FAST & EASY: Disassembling your Glock for cleaning and maintenance is essential. Bastion Pin Punch Tool helps remove base plate, locking block, trigger housing, and trigger pins for cleaning or replacement..
  • PREMIUM QUALITY MATERIALS TO LAST | BASTION SIGNATURE WORKMANSHIP: Our punch tool is made of hardened steel tool with black rigid polymer handle. The Front Sight Tool features a Hex wrench, ergonomic injection molded handle, durable black finish, and 3/16″ Hex for sights with a 0.090 hex..
  • BASTION SATISFACTION GUARANTEE: Buy risk-free! Please do reach out to us in case of any issues and we’ll quickly do all we can to make it right..
Check Stock

Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k

  • This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install.
  • This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to ....
Check Stock

ADE RD3-006x Green Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models, Canik TP9SF and Taurus GX4, G3C & G3 with Factory Steel Sights Pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and....
Check Stock

DUTRIX Glock Tool Kit,Front Sight Tool Magazine Disassembly Tool Mag Plate Removal Tool Pin Punch Tool for Glock 19 17 26 27 43 Accessories

  • COMPATIBILITY: DUTRIX Black glock tool set compatible with Standard Glock 9/40 Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41. Please note: Our tool kit does not work on the Glock 30 round magazines or extended type base plates.
  • Magazine Disassembly Tool: The easiest and fastest way to remove base plates from the standard Glock magazines without any damage to the plates and mag bodies..
  • Front Sight Tool: Magnetized tool to aid in the installation and removal of front sights on Glock pistols.It is long enough to get a grip to remove the sight..
  • Armorers Disassembly Tool: Aid in the removal of pins and base plates on Glock pistols.It is a good tool kit for Glock pistols, even handles well in smaller hands making it handy for women..
  • Easy to Remove and Install: An Internal Magnet Tip to Easily Hold the Front Sight Screw Securely in Place. Solid and Perfect for Sight Removal or Installation.Easy to carry,They can be carried in a pocket, perfect fit for travelling or on the road.1 Years Warranty: 100% Satisfaction Guarantee.
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock