Reviews Glass Tile Cutter 2

Tile Cutter Hand Tool Cut Floor Tile Glass Tile Cut Tiles Straight or Quarter Curve Manual Tile Cutter Tool for Cutting Wall Tile Porcelain Tile and Glass Tile Faster and Cleaner than a Wet Tile saw

  • For Straight Lines And Up to A Quarter Circle Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling. Score Tile at Waist Height Not on a Floor. Must Use 2 Hands to Score Hard Tile Never Hold Cu....
Check Stock

Tile Cutters Tile Tools for Cutting Ceramic Tile Glass Tile Cut Straight Lines and Curved Lines Cleanly No Wet Saw No Mess Cut Faster and Cleaner than a Wet Tile saw Replaceable Blade Cuts 1000 Feet

  • For Straight Lines And Up to A Quarter Circle Curve The Tile Cutter Is Great, For Semi Circles Inside Corner Cut Outs Around Outlets Doorways And Toilets You Will Want Kit 1 With Tile Hack Saw Blade For Wall Tile And 4 1/2" Grinder Diamond Tile Blade For Porcelain And Floor Tile, Kit 2 Has Tile Drill Bits For Ceramic And Diamond Drill Bits For Porcelain And Glass To Drill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling.....
Check Stock

Mosaic Tile Cutter Glass Tile Cutter Hand Tool Mosaic Tile Nipper Manual Mirror Cutter Plier for Home DIY Cutting Mosaic Glass Ceramic Mirror

  • ➤【Mosaic Tile Cutter 】The cutting wheel of mosaic tile nipper adopts high hardness tungsten carbide, with the characteristics of rust resistance and wear resistance..
  • ➤【Glass Tile Cutter Hand Tool】The TPR rubber handle allows you to hold and use it effortlessly, very suitable for DIY mosaic glass crafts, used for home improvement, kitchen and bathroom..
  • ➤【Wide Applications】Our tile cutter can cut and break glass or ceramic tiles with a max thickness of 9.5mm (0.37"), used for cutting mosaic, mirror, ceramic, porcelain, glass tile and stained glass quickly..
  • ➤【Easy to Use】1. Use the scoring wheel to draw scratches on glass or tiles. 2. Aligned the scratch with the middle part of glass cutting tool. 3. Break the tile or glass into two pieces..
  • ➤【What You Get】You will get 1pc manual tile cutter and 1 pair of gloves..
Check Stock

Manual Tile Cutter, 2 in 1 Glass Tile Cutter Hand Tool with Glass Breaking Pliers, Mirror Cutting Kit with 3 Tungsten Steel Blade for Home DIY Cutting Glass, Mirror, Ceramic Tile, Glazed Tiles

  • ★【Multifunction】2-in-1 hand tool put the glass cutter and tile breaking plier together, can cut and break the glass or ceramic tiles with the thickness of 3-15mm/0.12-0.59 inch..
  • ★【Fast Cutting】The blade adopts high hardness tungsten steel alloy, with the characteristics of rust resistance and wears resistance. The non-slip T-shaped handle allows you to hold and rotate effortlessly..
  • ★【Scope of Application】The glass cutter can effectively cut glass, ceramic tiles, mirror and glazed tiles, but not for cutting high-density tiles, such as marble tile, unglazed tile, polished tile, vitrified tile, tempered glass..
  • ★【Operation Method】1. Marking a scratch line on the tile. 2. Aligned the guideline on the tile breaking plier body and the marked scratch line. 3. Rotate the handle until the tile is divided..
  • ★【What You Get】You will get 1pc tile and glass cutter, 3pcs cutting blade, 10pcs feet..
Check Stock

SPEEDWOX 20PCS Heavy Duty Mosaic Wheeled Glass Nippers with Replacement Cutting Wheel Glass Running Pliers Breaker Grozer Pliers Oil Feed Glass Cutter Set Cut Resistant Gloves Leather Zipper Bag

  • 【What You Get】 8" Tile nipper x1, 8" glass running plier x1, 6" glass breaking plier x1, replacement rubber tip x2, glass cutter grip x1, 2-6mm cutter head x1, 6-12mm cutter head x1, 12-20mm cutter head x1, oil dropper x1, cross screwdriver x1, replacement wheel x2, screw x2, washer x2, hex wrench x1, cut-resistant gloves x1, leather zipper bag x1. Total 20pcs are what you need for mosaic tile beginners..
  • 【Premium Quality Pliers】 Body is made of drop forged high carbon steel and heat treated for strength and durability, and the cutting wheels are made of YG8 cemented carbide for cutting glass tile, porcelain, mosaic, wall & floor ceramic, stained glass easily and quickly. Bi-color TPR ergonomic handles for anti-slip and comfort grip. Runnning plier features a reference line in jaw which is ideal for breaking a score with ease. Grozer plier is ideal for nibbling glass away from edges..
  • 【Oil Feed Glass Cutter Set】 Features automatic oil dispensing system keep the wheel lubrication while you cut. 3 Glass cutter heads are suitable for cutting glass of 2-6mm, 6-12mm, 12-20mm thickness respectively..
Check Stock

Glass & Ceramic Tile Nippers - 8 Inch Heavy-Duty Wheeled Glass Tile Nippers Tool With Pro-Grip Handle, Ceramic Tile Cutting Shapping Plier, Tile & Mosaic Nippers

  • High Quality ----- Our Glass Mosaic Cutter is made of 55 steel, and the cutting wheel is made of YG8 cemented carbide material, robust and durable to use.The sharp, carbide wheels measure .875” in diameter and open to accommodate glass tile up to 3/8“ in thickness.
  • Easy To Use And Carry ----- Unique Handle Design is for easy and comfortable to grip while cutting the glass or tile, helping you save much efforts.Reasonable size and delicate appearance, easy to use and carry , so it is a great tool for cutting and shaping with your craft product.
  • Wide Applications ------ Glass Tile Nippers, Use on glass tile: two opposed, carbide scoring wheels easily score and cut glass tile, ideal for trim work on flooring, walls, mosaics and more. Can be perfectly used for cutting glass, tile, ceramic and various other materials.
  • With 2Pcs Replace Blade and 2Pcs Allen Wrench ------ The Glass Mosaic Cutter Nippers come with 2PCS allen wrench and 2Pcs Replace Blade to assist in making uniform cuts when the tile work requires measured consistency. The soft, rubber coated handle grips give you the best control prevent slips while in use wit....
Check Stock

youkzuan Professional Porcelain Ceramic Manual Tile Cutter,Glass Cutter Tool Kit with Large Tile Cutter,Tile Pliers,Shaped Glass Cutter,8Pcs Cutting Heads & 2Pcs Cutting Wheels Work Easy and Portable

  • ...ull force and evenly, the cracks must be deep! When opening, the red dot facing upwards! Do not stick the tiles too far into the pliers! Do not exceed thickness requirements! For large tiles please clamp both ends of cutting line! We strongly recommend testing and practicing with a few scrap tiles before using this cutter, because some skills are required. Read all the notes below this page! You must take out a few waste tiles for testing, because it has certain requirements on strength and operation methods, please operate on the waste tiles before using them normally..
  • 【Parameters】1.Theoretically no limit to max. cutting length, BUT we recommend max. 300cm (118”) 2. Cutting width 5cm-90cm (2”-36“), BUT you can cut max. 180cm (72") if placed along both sides3. Cutting thickness 0.5cm-1.2cm (0.2”-0.5”) Strong and durable, lever principle, save time and improve efficiency..
  • 【Why Choose Us】Professional and precise cutting of tiles, glass and mirrors, LIGHT only 1.6kg (3.6 lbs), so easy to carry and move this tile snap cutter. it can be used for professional tile/glass cutting, home decoration or DIY, designing student utensils, tile/glass restor....
Check Stock

SPEEDWOX 12PCS Glass Cutting Tool Kit Heavy Duty Glass Running Pliers Breaker Grozer Pliers Oil Feed Glass Cutter Set with 3 Size Cutter Head Oil Dropper Screwdriver Engraved Pen Leather Zipper Bag

  • 【What You Get】 8" Glass running plier x1, 6" glass breaking plier x1, replacement rubber tip x2, glass cutter grip x1, 2-6mm cutter head x1, 6-12mm cutter head x1, 12-20mm cutter head x1, oil dropper x1, cross screwdriver x1, tungsten carbide tip scriber x1, leather zipper bag x1. Total 12pcs are what you need for mosaic tile beginners..
  • 【Premium Quality Pliers】 The body is made of drop forged high carbon steel and heat treated for strength and durability. Bi-color TPR ergonomic handles for anti-slip and comfort grip. The spring action reduces hand and wrist fatigue for easy tiling project. Runnning plier features a reference line in jaw which is ideal for breaking a score with ease. Grozer plier is ideal for nibbling glass away from edges..
  • 【Oil Feed Glass Cutter Set】 Features automatic oil dispensing system keep the wheel lubrication while you cut. 3 Glass cutter heads are suitable for cutting glass of 2-6mm, 6-12mm, 12-20mm thickness respectively..
  • 【Durable Engraving Pen】 Tungsten carbide tip for carving effortlessly on hard materials including hardened steel, stainless steel, ceramics，metal，tile and glass. Each pen comes with a chuck helps prevent accidental stab injury..
  • 【Easy Organization】 The pouch is made of high qual....
Check Stock

Milkary 5PCS Glass Mosaic Cutter Kit Heavy Duty 8 Inch Wheeled Plexiglass Nipper Pliers Tool with 2PCS Replacement Blade and 2PCS Allen Wrench for Crafts

  • The cutter body is made of 55 steel material. The cutting wheel is made of YG8 cemented carbide material, sturdy and durable..
  • Ergonomically designed. The soft rubber-coated handle is easy and comfortable to grip while cutting the glass or tile and save much effort..
  • The sharp carbide wheels are able to open to accommodate glass tile up to 3/8“ in thickness. The resilient spring of the mosaic cutter is flexible....
  • Used for cutting glass, tile, ceramic and various other materials. Great tool for cutting and shaping with your craft products..
  • Package Included 1pcs Mosaic Cutter Nipper, 2pc M4 Allen Wrench and 2 Pcs Replacement Blades..
Check Stock

LIUDAINC Diamond Drill Bit Set Hole 2 in 1 Glass Cutter Consolidated Stained Glass Cutter and Breaking Plier Great Glass Cutter Manual Tile Cutter for Mirrors/Mosaic/Mirror Tiles

  • ➤ High-quality blade: Our cutter blade of a glass cutter is made of hard tungsten steel alloy. The blade is sharp and the cutting efficiency is....
  • ➤ 2 in 1 Tile and Glass Cutting Tools: 2 in 1 glass cutting tool can cut and divide glass and tiles, so you don't need to buy extra functional....
  • ➤ Simple operation: It is very convenient and simple to operate. ① Cut a mark on the tile/glass. ②Align the white line of the glass cutter with....
  • ➤ Comfortable handle: The handle adopts ergonomic principles, thickened and widened on the original basis. It is more comfortable and efficient to....
  • I wish you a good day, a good life and a safe life, cordial greetings, sincere blessings, my best regards！.
Check Stock

Diamond Drill Bit Set Hole Hand Grip Tile Cutter Glass Cutter Tool 2 in 1 Glass Cutting Kit with Extra 2 Cutter Blades Glass Breaking Pliers Glass Tile Cutter for Glass Mirror Ceramic Tile Glaze

  • ➤ High-quality blade: Our cutter blade of a glass cutter is made of hard tungsten steel alloy. The blade is sharp and the cutting efficiency is....
  • ➤ 2 in 1 Tile and Glass Cutting Tools: 2 in 1 glass cutting tool can cut and divide glass and tiles, so you don't need to buy extra functional....
  • ➤ Simple operation: It is very convenient and simple to operate. ① Cut a mark on the tile/glass. ②Align the white line of the glass cutter with....
  • ➤ Comfortable handle: The handle adopts ergonomic principles, thickened and widened on the original basis. It is more comfortable and efficient to....
  • I wish you a good day, a good life and a safe life, cordial greetings, sincere blessings, my best regards！.
Check Stock

ABN Tile & Mosaic Nipper, Cutter Pliers with Carbide Trimming Tips

  • [Fit for Your Tool Kit]: When you need to trim and cut porcelain or tile, depend on the ABN Tile Cutter Hand Tool Ceramic tile Cutter.
  • Use this Manual tile cutter porcelain tile cutter when working on flooring, walls, mosaics, and more.
  • [For Your Project]: Tile cutting tools ceramic cutter allows you to make quick and easy cuts.
  • Use tile cutter tools when it comes to irregular cuts for customizations in tile or stonework.
  • [Built to Last]: Tile manual cutter constructed of chrome vanadium for strength and longevity.
  • No need to worry about tile cutter hand tool ceramic hand tile cutter breaking or bending under the pressure.
  • [Comfort Grip]: Tile cutter includes soft rubber coated handle grips.
  • Tile hand cutter wall tile cutter handle ensures control while in use so that there will be no slips while in use.
  • Handles measure 8 inches (20cm) in length.
  • [Measurements]: The sharp, straight carbide-tipped ends of the manual ceramic cutter have a cutting surface of over 3/4 inches (1.9cm) for tile.
  • Ceramic tile cutter tools spans up to 1/2 inches (1.27cm)....
Check Stock

Glass Cuttings Tools, Professional Glass Cutter with Metal Handle&Oil Reservoir for Cutting Thick Glass and Tiles.

  • [Unique cutter wheel design]: Glass cutter tool with a precision cutter wheel processed by unique technology. Professional precision coordination ensures that the cutter wheel and the cutter plate match precisely, and ensure that there is no deviation during radial cutting, which is convenient for cutting. Zero deviation cutting performance, good bite, not easy to slip..
  • [Industrial-grade glass cutter]: The glass cutter uses cemented carbide and diamond particles, overall heat treatment, high hardness, high cutting precision, sturdiness and durability, and high efficiency. All copper fittings, the cutting life exceeds 100,000 meters..
  • [Self-Lubricating]: Glass cutter with integrated oil reservoir, Long lasting, self-oiling tungsten carbide cutting wheel..
  • [Traditional straight handle design]: Designed for comfort, durability and performance, this industrial-grade glass cutter uses an all-metal handle to ensure user comfort and performance..
  • [Wide application range]: Glass cutter, mirror cutter, tile cutter, glass bottle cutter, thick glass cutter..
Check Stock