Reviews Glass Marking Engraver

DAPAWIN 2 Pack Mechanical Carpenter Pencil Built-in Sharpener, 1 Engraver Pen and 12 Leads(2.8mm) Men Gifts Marking Tool for Construction/Carpenters

  • These woodworking tools stocking stuffers for men contain 2 construction pencils, both built-in pencil sharpeners, 1 engraver pen, 3 red lead pencil refills, 3 yellow refills, and 6 grey graphite lead. Making wood, metal, glass, and concrete is part of your daily work. Well, Highly recommended this carpenters pencil. mechanical carpenter pencil is portable, easy to use, and could work efficiently. Different colors could mark clearly and accurately on hard surfaces, paper, and some dark surfaces..
  • The Long nose carpenter pencil with 2.8 mm point and 1.7 inches long is perfect for marking those spots with deep templates or some tiny place. This Construction pencil would not stuck in narrow places. Fits in spots where a regular pencil won't fit for marking. Smooth writing and thick sturdy lead help you mark clearly and obviously on your project. If you need a longer pen for marking, press out and extend the lead to adjust the length. Ideal for fine work, hinges locks, etc..
  • With the built-in sharpener when your tip starts to dull out you just sharpen it up nice and quick. No more wasting time to keep looking for a sharper, just sharp it anytime you want. Woodworking pencils’ body is plastic for the lightweight to carry and the long nose part is met....
Check Stock

3000 m W Engraving Machine, TopDirect 3w Mini Desktop Printer Engraver Working Area 7.5 x 7.5 cm(2.75\ x 2.75\) for DIY Logo Marking Wood Carving with CE Approved Certification

  • 【NO Electricity Needed - DIY Carve Tools】- This cordless engraver battery engraver, engraving pens only powered by 2 AAA batteries (not included). Free from sockets and wires, you can engrave anywhere and anytime..
  • 【Mini Engraver Machine】- The Metal engraver hand tool compact size makes it easy to carry. It's super light and effortless to work. Won't feel tired even if you use the metal engraver for a long time..
  • 【Hand Metal Engraver - Easy to Use】 - Battery powered engraver, micro engraver pen, tool engraving kit, cordless engraver tool, metal etcher engraver, tool engraver, easy etcher is a portable engraving tool that lets you customize personalized accessories and gifts, easy to use and is perfect for both beginners and professionals..
  • 【Graver Kit with Extra Diamond Tip Bit Replacement】- The etcher engraver tool engraving tool kit can be replaced directly with a blunt or broken one, rather than being purchased separately. You will receive extra 5pcs diamond tip bits..
  • 【Wide Application of Etching Kit】- Engraver tool for metal, engraver tool for glass, electrical machinery has a 21,000 RPM Motor to be engraved wide variety of materials, like metal, stone, plastic, glass, ceramic, wood, leather and more..
Check Stock

ENJOYWOOD Laser Engraver, Desktop and Handheld 2 in 1 Laser Engraving Machine, Fiber Marking Machine for Metal Plastic Leather, 0.001mm/4K Engraving Accuracy, 0.01mm Compressed Laser spot.

  • 【High Power Laser Engraver Machine】 100W whole machine electrical power, the pulse peak optical power can reach 20000W.Upgraded compressed spot technology.The ultra-fine laser focus area is reduced to 0.02mm in diameter, and the minimum markable character is about 0.06mm*0.15mm (tested with focusing film)..
  •  【Fine Engraving】0.01mm ultra-long and ultra-fine end-pumped infrared laser enables every detail of engraving to be presented, perfectly presenting 4K-level high pixels. Precise positioning,ENJOYWOOD M4 adopts dual-infrared light positioning design, which can accurately locate the marking position without offset..
  • 【Desktop and Handheld 2 in 1 Laser Engraver】 M4 adopts a highly integrated design, and the core components are lightweight, which brings more usage scenarios. It can be hand-held to mark on non-horizontal surfaces, walls, and facades. Start your creation anytime, anywhere..
  • 【Industrial Galvanometer Technology】 M4 marking machine uses 1064nm wavelength infrared light ....
Check Stock

OMTech 30W Fiber Laser Engraver, LightBurn Compatible Laser Engraving Machine with Red Dot Pointer, 6.9x6.9 Solid State Laser Marking Etching Machine for Metal Aluminum Steel Gold Silver Jewelry More

  • PROFESSIONAL METAL MARKING: OMTech's 30W laser engraver employs the world-famous solid-state fiber laser, with an MTTF of over 100,000 hours of operation.
  • this 1064nm laser marking machine's 65μm spot size is ideal for applications with tight tolerances and offers incredibly smooth and precise results.
  • PRECISION OPTICS: This etching and marking machine's high-speed Sino-Galvo galvanometric system offers continuous marking speeds as high as 275 ips (7000 mm/s).
  • its 200 ns pulses can be processed at rates from 1-600kHz for quick scanning, engraving, and turn around.
  • and our compact Fθ field lens provides a 175x175 mm (6.9x6.9 inch) scanning range with less than 1% distortion.
  • EASY SETUP: This fiber laser cutter's clear instructions and modular design allow quick assembly.
  • the work area's grid dots support positioning bars that can be used to hold your material in just the right place every time.
  • a precision height scale keeps manual focusing exact and easily replicated.
  • and the 4-pin port allows plug-and-play connection to your rotary axis (not incl.) for marking on rings, cups, pipes, and other curved surfaces.
Check Stock

HARDELL Engraver,5 Speed Etching Power Tool Equipped with Soft Rubber Handle and Tungsten Carbide Steel Bits,Mini Multi-Function Engraver for Tile,Metal,Stone,Wood,Leather,Glass,PVC Pipe,DIY Crafts

  • 【Ergonomic Designed Handle】Multi-function Engraver designed with Soft Rubber Handle ,easy to handle and works,making it comfortable to use and control without getting blisters.
  • 【5-Speed Power Engraver】 The variable speed Engraver can adjust 5 different speed at 6000/min strokes to meet your different needs .The power Etching tool is a perfect gift for hand maker , Christmas , Birthday ,Thanks Giving Day ,Father's Day.
  • 【Engraver with LED Indicator】Powerful but small Engraver has a blind spot lighting LED design. Reduce backlight shadows and overcome the adverse effects of dark areas on the use of carving, provide you with a better experience.
  • 【Perfect DIY Tool】The carved line of high-performance Multipurpose Engraver is coherent and steadier suitable for Tile,Metal （Not for hardened steel）,Stone,Wood,Leather,Glass,PVC Pipe,DIY Crafts, The marks which you engrave can be personally , you can own your own Logo.
  • 【Portability】Comfortable pen-size design of small engraver tool gives you more freedom while operating,Easy to carry and can use it at anywhere you want, please wear your hearing protection equipment during use..
Check Stock

Defabee Engraving Pen with 34Bits, Portable Engraving Pen Electric Cordless Rotary Tools, Professional Engraver Tool for Metal to Wooden, Glass, Jewlry

  • ...ook pretty and artistic. It is super easy to use and is perfect for both beginners or professionals..
  • USB RECHARGEABLE AND PORTABLE: This portable engraving tool is rechargeable with USB, you can charge the product anytime, anywhere. It only takes 30 minutes and you can use 1 hour. Otherwise, the exact grinding engraver is only 5.7 inches long and weighs only 0.1 pounds, so you can put it in your bags and clothing pockets..
  • LOW NOISE AND INTENSE POWER: This electric engraver is low noise when it operates. No need to worry about it will affect the family's rest. The body of our etcher engraver tool is light and small. And with the strong power, you can easily engrave some flower patterns in timber, glass or jewelry..
  • WIDE APPLICATION: Our portable and compact etching pen works with precision and comfort on almost any surface, including glass, metal, timber, plastic, leather, jewelry and much more. Endless applications included engraving tools, sporting goods, toys, telephone chargers and delicate jewelry, watches and glassware. Also functional as a timber engraver or part of a metal engraving kit..
  • COMPLETE ACCESSOIRES AND BEST SERVICE: Our metal engraver pen kit includes 1* engraving pen, 34* bits, 16* Pattern engraving sheet, 6* Polishing Abrasives....
Check Stock

LaserPecker 3(Basic) Laser Engraving Machine, Fiber Laser Engraver 1064nm Cold Red Light 0.01mm Compressed Spot, 48000mm/min High Speed Handheld Fiber Laser Marking Machine for Metal Jewelry Plastic

  • Fiber Laser Engraver for Metal and Plastic: LaserPecker 3 laser engraver with 1064nm fiber laser for metal and plastic materials. e.g: stainless steel, gold, silver, aluminum, titanium, copper, coated metal plate.
  • acrylic, plastic, etc. Can be directly engraved without any preprocessing..
  • Much Smaller Compression Spot: LaserPecker 3 laser engraving machine adopts a 0.01mm*0.01mm ultra-fine compression spot, achieving detailed and vivid engraving images. Present pixels with 4K level perfectly..
  • Ultra Fast Engraving: LaserPecker 3 fiber laser marking machine with innovative galvo technology achieves high-speed engraving at 48000mm/min. Comparable Industrial-grade engraving speed brings a subversive experience..
  • Easy To Focus, Quick To Start: LaserPecker 3 laser engraving machine adopts dual infrared light positioning design (When the two red light spots are coincident, the focus is correct), which can accurately locate the marking position without offset and good position.
  • Quickly and accurately control the lifting of electric stand, can be realised easy focus on objects of different heights..
  • Versatile Base, Create With Easy: With the help ot the positioning plate on the base, the position of the engraving objects can be fixed/adjusted, making batch engra....
Check Stock

Electric Engraving Pen with 36 Stencils,25W Cordless Etching Engraving Tool with 35bits,USB Rechargeable Mini Micro Professional Engraver Machines for Jewelry Wood Metal Glass Stone Plastic

  • [Rechargeable&Intelligent Power-off]-Our engraver tool for metal is rechargeable,come with USB cable.The micro engraver pen is built-in safety protection circuit board and intelligent overload protection chip.When the working resistance is too large,it will automatically cut off the power to prevent from damaging the engraving pen.Really safe to use..
  • [Low Noise and Portable]-This electric engraver is low noise when it works.No need to worry about it will affect the family's rest.The body of our etcher engraver tool is light and small.You can carry it everywhere.Super easy to use and is perfect for both beginners or professionals.This is a portable engraving tool that lets you customize everyday objects to create one-of-a-kind,personalized accessories and gifts..
  • [Adjustable Speed&High Performance]-Power up to 25W while working,3 levels speeds can be adjustable from 5000-25000 r/min for different materials.Improved high performance 25000RPM motor to provide better control and handling over similar competitors with many other motors in market.Features a durable,lightweight aluminum frame and ergonomic grip to give you precise fingertip control..
  • [Wide Applications]-Our electric engraver works with precision and comfort on nearly any surface, includi....
Check Stock

General Tools Cordless Engraving Pen for Metal - Diamond Tip Etching Tool for Engraving Toys, Sporting Goods, & Glass Gifts

  • ENGRAVING PEN: Our portable handheld etcher enables precision cordless engraving with permanent identifying markings by anyone from DIYers to professional technicians. It has a 3/32" diamond tip bit and a safe fingertip-controlled on/off switch..
  • METAL ENGRAVER: The cordless tool holds like a pen for convenience and has an ergonomic tri-lobal grip and fingertip control. The compact engraver has a lightweight aluminum body for performing delicate personalization on DIY projects..
  • SCRIBE TOOL: The electric pen features a 20,000 RPM motor to engrave glass, metal, ceramic, and plastic, only using two included AAA batteries. It can also be used as a practical wood engraver or part of your metal engraving kit..
  • GLASS ETCHING: There are endless possibilities for personalizing, including phone chargers, house keys, keyrings, delicate jewelry, watches, and glassware. Users can protect all types of valuables by identifying markings on their household items..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

ATOMSTACK A5 M50 PRO Laser Engraver, 40W Laser Cutter with Offline Engraving, Laser Engraving Machine with APP Operate Fuction, 5.5W-6W Output Power, 410x400mm

  • IMPORTANT: There need to update the firmware at first to work with the APP function. The laser engraver is without WiFi at first. Please check the video which below the product pictures named "Upgrade the firmware for the engraver and operate with APP". You can also contact with the seller to get the APP manual and help for updating the firmware..
  • 【Upgraded Compression Laser Beam】The laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. The high-density laser can easily cut 15mm light wooden boards, 12mm acrylic.The newly compression laser beam engraving speed is 60% faster than ordinary laser..
  • 【Eye-protection Flame-retardant Filter Panoramic Glass】The engraving machine is equppied with the fliter glass can prevent eye burns, and eliminate the hidden danger of acrylic being easily burned. You can also clearly watch laser engraving but you do not need to wear goggles. Thus not only reduces the cost of the goggles, but also makes engraving safer..
  • 【Intelligent Protection Design & Emergency Button】Limit switches are installed on both X-axis and Y-axis. At the maximum stroke of the laser c....
Check Stock

Hand Engraver Tool for Metal,HARDELL 13W Engraver with Stencils,120V Handheld Etching Tool for DIY, 5 Speed Engraving Tool with 7200 Strokes/Min,3 Carbide Points Included

  • 1.【SOFT RUBBER HANDLE】: HARDEll engraver handle has a soft rubber coating, the handle is ergonomically designed to perfectly fit the curvature of the hand grip, which can effectively reduce wrist fatigue and soreness after long hours of engraving work, giving you a comfortable and precise operating experience..
  • 2.【5-SPEED ADJUSTABLE ENGRAVING TOOL】: 5-Speed engraving pen can provide a variety of engraving depths and speeds according to your engraving needs. Handheld engraving machine is equipped with 3 replaceable tungsten carbide writing heads, allowing you to obtain detailed and satisfactory engraving results on a wide range of engraving materials. such as tile, metal (not applicable to hardened steel), stone, wood, leather, glass, PVC pipe, DIY crafts..
  • 3.【SMALL BODY, BIG POWER】: With a lightweight 12oz design, the 7200Strokes/Min 13W handheld engraver can fully meet the daily engraving needs of crafters. The comfortable pen design gives you more freedom in operation and is easy to carry, which can perfectly fit your private custom engraving needs..
  • 4.【VIBRATION TYPE ENGRAVING PEN】: Mental engraver using pure copper coil movement to provide surging power and longer life. Vibration engraving work principle, making the carving lines mor....
Check Stock

NEJE 3 N30820 Laser Engraver, 5.5-7.5w Output Power DIY Laser Engraver and Cutter Machine Support LightBurn, 0.08mm Ultra-Fine Focus, for Acrylic Wood and Glass ,170 x 170 mm(6.7'x6.7')

  • ...ith square focus, the minimum focus point can reach 0.08×0.08mm. The module is good at engraving with wood, rubber stamping, glass, transparent acrylic and cutting plywood, black acrylic, cloth, etc… The module has a built-in intelligent driver, which can dynamically adjust the fan for quieter use.
  • 【Appropriate Engraver Area】170 x 170 mm engraving area, the desktop professional engraver machine is tiny, beautiful and lightweight, portable and does not take up space, and is fully functional.It is the most cost-effective machine. The whole machine test only needs 4 screws to complete the installation. Suitable for beginners/entrepreneurs/engraver hobbyists/designers/housewives.
  • 【Applicable Engraver Materials】NEJE 3 portable engraving machine supports engraving wood, MDF, leather, paper, cotton and other materials.Cover spraying can engrave stainless steel, glass, transparent acrylic and so on.The machine is compatible with mature engraving software on the market (LaserGRBL, Lightburn) and beginner-friendly software (NEJE 3).
  • 【Security Protect】Safety is always the top priority.NEJE 3 cutting and engraving machine has built-in MEMS gyroscope sensor to record the state of the machine.When the device moves, the machine will automatically stop w....
Check Stock

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock