Reviews Gear Shafts

Tamiya America, Inc 1/14 Mercedes-Benz Arocs 3348 6x4 Tipper Truck Kit, TAM56357

  • 2 Belt-Driven 4WD Uses TRF420 Oil-Filled Gear Differentials.
  • Camber And Caster Angles Are Adjustable By Turnbuckle Shafts.
  • Comes With Super Short Big Bore Size Shock Dampers.
  • Universal Drive Shafts And Full Bearings Included.
Check Stock

16 Pitch, 24 Teeth, 1.50 Pitch Dia., .5000 Bore, Boston Gear Miter Gears (1 Each)

  • Straight miter gear for transmitting mechanical power between perpendicular shafts.
  • High carbon steel for tensile strength and hardness.
  • Pressure angle of 20 degrees for a lower contact ratio between gears.
  • Hardened teeth for 1:1 gear ratio applications for torque and motion.
  • Bore has keyway and set screw for use with keyed shaft.
Check Stock

Yibuy 2 PCS 45# Steel 16 Teeth 1.5 Module 8mm Hole Diameter Bevel Gear Wheel

  • 64 teeth for use with G486Y-P mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Martin HM1230 Miter Gear, 20° Pressure Angle, High Carbon Steel, Inch, 0.540\ Face, 5/8\ Bore Diameter, 2.5\ Pitch Diameter, 2.62\ Outer Diameter, 30 Teeth

  • Straight miter gear for transmitting mechanical power between perpendicular shafts.
  • High carbon steel for tensile strength and hardness.
  • Pressure angle of 20 degrees for a lower contact ratio between gears.
  • Hardened teeth for 1:1 gear ratio applications for torque and motion.
Check Stock

Gate Caster Wheel Spring Loaded 4 Inch Swivel Castor 440lbs Capacity with Universal Mount Plate,Fence Gate Wheel

  • Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear LSA102YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.625\ Bore, 12 Pitch, 18 Teeth, Steel

  • Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

J.W. Winco 6136015 MC Plastic Cylindrical Handle

  • Hand knob: Black phenolic plastic (Duroplast PF).
  • Mainly used on threaded shafts such as gear lever arms or as fixed grip handles.
Check Stock

J.W. Winco 6136034 MC Plastic Cylindrical Handle

  • Hand knob: Black phenolic plastic (Duroplast PF).
  • Mainly used on threaded shafts such as gear lever arms or as fixed grip handles.
Check Stock

Fender Pure Vintage 70s Bass Tuning Machines

  • Set of four Pure Vintage nickel-plated stamped "clover-leaf" style open-gear tuning machines with mounting screws and bushings Fender stamped onto....
  • Tuning machine shafts approximately .55-Inch tall.
  • Fits most '70s-era basses will not retrofit to American Standard or American Deluxe basses.
Check Stock

Poulan PP1000E 7-Inch Pro Lawn Edger Attachment

  • Fits most major brand trimmers with detachable shafts.
Check Stock

Hakka Commercial Dough Mixers 10 Quart Stainless Steel Spiral Mixers (DN10)

  • Front-mounted controls with 60-minute digital timer and last batch recall.
  • Heat-treated hardened steel alloy gears and shafts.
Check Stock

Tamiya 300054114 Crawler Motor CR CR/Tuned 35T

  • Radio Control Kit. Durable ladder frame chassis features steel channel and resin crossmembers for high strength.
  • Adjustable front and rear leaf spring suspension system equipped with friction dampers.
  • 3-speed transmission allows gear changing and realistic low-speed driving.
  • Propeller shafts and slipper clutch efficiently transfer power to all wheels.
Check Stock