Reviews Gear Oil Spur Gear

DAPENGNIAO for Das87 6 Pcs M0.2 Brass 10T-50T Spur Gear Accessories

• 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
• Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
• With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

• 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
• Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
• With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

Hobbypark 11184 Steel Diff Differential Main Metal Spur Gear 64T &11119 Motor Gear 17T RC Replacement Parts for Redcat HSP 1/10 Monster Truck

• Produced by HobbyPark,Compatibile with: Redcat Lightning EP Drift, Lightning EPX PRO, Sandstorm, Sandstorm TK, Tornado Epx/epx PRO, Tsunami EPX, Volcano Epx/epx PRO, Vortex Epx/epx PRO 1/10 Scale Truck HSP.
• 1x Diff Main Gear (64T) Diameter of The Hole:5mm.
• 1xMotor Gear (17T) Diameter of The Hole:3.17-3.18mm.
• 1 xGrub Head Screw (As shown in the picture).
• please attention, because of the motor gear and this spur gear are metal, suggest to add lubricating oil, not only to reduce the friction between the metal gear, but also the sound will be a little bit small.

ARRMA Steel 57T Slipper Set 0.8Mod ARA310948

• Arrma ARA310948 - Steel 0.8Mod Slipper Set, 57T.
• Features: Precision manufactured aluminum slipper hubs High strength 57T 0.8 module steel spur gear for maximum power handling capability Castellated....
• Includes: (1) Assembled Slipper Clutch with Steel Spur Gear.
• Part number(s) included (in factory packaging): ARA310948.

ARRMA Slipper Clutch Maintenance Set ARAC9103

• ARRMA ARA311034 - HD Slipper Set, 0.8Mod, 57T.
• Features: Precision manufactured aluminum slipper hubs Durable composite 57T 0.8 module spur gear for reliable power handling capability Castellated....
• Includes: (1) Assembled Slipper Clutch with Composite Spur Gear.
• Part number(s) included (in factory packaging): ARA311034.

Traxxas 59076-3-RED Slayer Pro 4×4 Red TRX 3.3 Engine w/EZ-Start 2 Speed Transm

• ...r dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
• Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
• Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
• Part number(s) included (in factory packaging): 59076-3.

Traxxas 59076-3-BLUE Slayer Pro 4×4 Blue TRX 3.3 Engine w/EZ-Start 2 Speed Tran

• ...r dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
• Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
• Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
• Part number(s) included (in factory packaging): 59076-3.

Traxxas 36054-1 1/10 Stampede 2WD Truck BlueX RTR w/TQ Radio/iD/XL-5 ESC

• ...#2216 4-Channel Receiver. Battery: 7-Cell Hump 3000mAh NiMH with Traxxas High-Current Connector and iD Auto Battery Identification that Allows Traxxas iD Equipped Charg.
• Includes: (1) Stampede Chassis with Oil-Filled Shocks (1) 550 Motor (1) XL-5 ESC (1) Body (4) Tires (4) Foam Inserts (4) Wheels (1) 19 Tooth Pinion Gear (1) 23 Tooth Pinion Gears (1) 86 Tooth Spur Gear (1) TQ 2.4GHz Radio with Waterproof Electronics (1) 7-Cell Hump NiMH 3000 mAh Battery (1) 4A DC Car Charger Illustrated Instruction Manual.
• Specs: Length: 16.25" (413mm) Width: 13" (330mm) Height: 9.5" (241mm) Weight: 2.98lbs (1355g) Approx. Wheelbase: 10.75" (273mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.75" (324mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Gear Ratio: 4.5:1 with Stock 19T Pinion Gear 3.7:1 with Optional 23T Pinion Gear.
• Part number(s) included (in factory packaging): 36054-1.

1 Pair Western Style Antique Spur, Male Knights Equestrian Equipment Spurs for Boots, Horse Riding Ornaments Low Carbon Steel Carving Spurs with Hand Engraved Trims

• ... strong and resistant to corrosion. The rotating tooth roller not only can effectively control the horse, but also reduce the damage to the horse. The carved stud and the metal pendant at the end. At each step, a clang sounds and takes you into the wild Western world..
• Wide Applications of the Horse Spur- The curved gear thorn reduces the stimulation of the horse and avoids significant damage to the horse. Knight Equipment Spurs are suitable for all kinds of occasions, such as training horses/ equestrian events/ dressage/ sports/ entertainment/ performances/ farms/ ranch etc..
• Easy to Operate and Use- The slot is located at the rear and can be fixedly mounted between the spur gear and the belt. Spurs for Boots, Western Retro Cowboy Black Carbon Steel Carving Spurs with Roller..
• Package Includes- 1 Pair of Western Antique Spur.
• Black Low Carbon Steel Spurs, Western Spur, Equestrian Equipment Antique Spur, Western Antique Spur Horse Riding Ornaments Equestrian Equipment Low Carbon Steel Handcraft Spurs for Boots..

Big Agnes Gear Loft Tent Accessory, Triangle

• Keep your essentials within reach with a lightweight mesh gear loft that hooks onto the loops in your Big Agnes tent..
• Please check your tent for compatability.
• Compatible with Fly Creek HV UL 1/2 (standard, Platinum), Tiger Wall UL 1/2/3 (standard, mtnGLO, Platinum) Copper Spur Platinums, Copper Spur HV UL 1/2/3 (standard, mtnGLO), Fly Creek HV UL Bikepack 1/2, Copper Spur HV UL Bikepack 1/2, Seedhouse SL 1/2/3, C Bar 2/3, Copper Spur HV Expedition 2/3.

Mxfans 30 T Brass Gear Wheel & 4MM Hole Dia Shaft Set 0.5 Mold 1:30

KXA 9Pcs/Set CJ0618 Household Small Lathe, Micro Lathe Gear, Metal Exchange Gear

TAMIYA America, Inc 1/10 Frog 2WD Buggy Kit, TAM58354

• Changeable pinion/spur gears-allows gear ratio changes-3 of each included.
• Straight ribbed racing front tires and high-grip rears.