Reviews Gear Chuck

CKS375 Wood Lathe Chucks, 3.75\ 4-Jaw Self-Centering Scroll Chuck with 1\ x 8TPI Thread Woodworking Turning Tools Set Include( 3.75 Gear Chuck,5 Interchangeable Jaws, 1 Wood Screw)

  • PRODUCT INCLUDES: (1) 3.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
  • Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with short and long multi-position grip-studs.
  • Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
  • Application: This CKS375 3-3/4"" Wood Lathe Chuck Set includes a 5-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
  • LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..
Check Stock

Mophorn K11-200 Lathe Chuck 8 Inch 3-jaw,Lathe Chuck Self Centering Reversible Hardened Steel With Internal and External 2 Set Jaws

  • Premium Steel Structure: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC 58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • Large Clamping Range: This chuck includes two sets of internal and external jaws. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • High-Performance Chuck: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Effortless Operation: The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

LUMITECO 1/4 Lock on air Chuck,Mini air Compressor Portable tire inflator tire Chuck Hose end with Barb Connector for Hose repair-3Pack

  • 90 degree lock-on tire inflator chuck for portable tire inflator, for bike, motorcycle, car.
  • 1/4" ID Hose Barb end makes it the perfect choice for hose repairs.
  • open flow with a lock-on clamp make it easy for hands free tire inflation.
  • 1 all metal air chuck end,2 metal+reinforced air chuck end ,1 free worm gear hose clamp.
  • To use the all metal chuck under 170psi,and use the metal+reinforced chuck under 120psi,heavy truck/vehicle forbidden..
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

  • Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case.
  • Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs..
  • pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter.
  • #1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8".
  • #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2".
  • With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe.
  • including bowls, spindles, pens, other small turning projects, and much more.
  • Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!.
Check Stock

Shop Fox M1099 10 by 26" Bench athe, Metal, Large

  • ...extra 21 tooth change gear (included) you can create every American Standard Metric thread from 0.3 to 8.0 mm pitch..
  • Included contents: 32 full page Mini Lathe Users Guide (complete with operation examples, maintenance guidelines, parts diagram, wiring diagram, etc.), Precision 3" (80 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench, Tailstock (13mm) drill chuck with shank and a 6mm drill bit, 8 mm Brazed Carbide RH Turning Tool, MT2 dead center, An 11-gear change gear set that includes a 21 tooth gear for accurate metric threading, Two open end wrenches, Four hex (Allen) wrenches..
  • About Us - LittleMachineShop.com is small U.S. business and the premier source of tooling parts and accessories for bench top machinists. We have a direct relationship with the Manufacturer, and we offer full technical support for the machine plus all replacement parts, upgrades and accessories to keep it running for years of service. The 1014 lathe is manufactured by a world leader in lathes and mills and makes metalworking machines for some of the biggest tool brands in the world..
Check Stock

Z011 3-Jaw Lathe Chuck, 10-35mm Zinc Alloy Mini Lathe Chuck, Self Centering Wood Turning Chuck with Connecting Rod for Mini Lathe, Power Lathe Accessories

  • Material: Made up of zinc alloy material, good corrosion resistance, not easy to rust. High strength and hardness, small size, comfortable to wear..
  • Clamping Range: The clamping range of this chuck is between 10-35mm(0.39-1.38inch), which is suitable for clamping a variety of industrial parts..
  • Application: Design of three jaws, self-centering, widely used for woodworking lathe..
  • Accurate: The high precision design of the chuck-bevel gear guarantees the accuracy of the chuck operation..
  • Compact Size(D*H): About48x21mm/1.89x0.83inch. The compact chuck is small in volume, easy to use..
Check Stock

PORTER-CABLE 20V MAX* Hammer Drill, Tool Only (PCC620B),Black Gray

  • High performance DEWALT hammer drill delivers 27,200 BPMs.
  • The cordless hammer drill has 2-speed gear box (0-400 RPM) for high torque applications (0-1600 RPM) for high speed applications.
  • 1/2-inch metal racheting chuck minimizes bit slipping in chuck.
  • Battery fuel gauge, belt hook, LED light, (2) magnets for bit storage.
Check Stock

VINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1\x8TPI thread & 3/4\x16TPI Adapter, 3 Years Warranty

  • ✅Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first..
  • ✅Internal jaws tighten around workpieces varying from 1-1/2" to 3" (or 3" Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-5/8" Included screw chuck provides even more options for supporting your projects.
  • ✅4" sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined.
  • ✅Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines.
  • ✅Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life.
Check Stock

DEWALT Corded Drill with Keyless Chuck, 7.8-Amp,1/2-Inch (DW246)

  • Single-sleeve keyless chuck with spindle lock provides greater bit retention and tool-free convenience of the electric drill.
  • Triple gear reduction provides increased torque and reduces gear stress for the corded drill.
  • DEWALT corded drill has rubber grip and two-finger trigger for increased comfort and greater control.
  • Metal gear housing for jobsite durability and increased reliability.
  • Helical-cut steel and heat-treated steel gears for long life and durability.
Check Stock

GALAX PRO 2-Speed Drill 20V MAX Lithium-Ion Drill/Driver, 3/8'' Electric Drill with 19+1 Torque Setting, 68 Pieces Accessories Ideal for Home Improvement and DIY Project

  • 2-Speed Gearbox: High speed transmission delivers two speeds (0 - 400 / 0 - 1,500 RPM) for a range of fastening and drilling applications. The first gear provides greater torque and control and second gear provides greater speed.
  • 19+1 Torque setting & metal chuck: 20V Cordless Drill with 19+1 torque setting that can provides precise control for drilling into stone, wood, metal, plastic, and all screwdriving tasks. A maximum torque at 265 In-lbs is available for tough jobs. The drill has an all metal chuck that locks securely. 3/8'' keyless chuck for efficient changing of drill or screwdriver accessories.
  • Lightweight & compact drill: This power and incredibly lightweight drill kit is great for hard-to-reach areas and overhead tasks. Best performance-to-size ratio in its class. This lightweight yet high quality drill helps to reduce fatigue when carrying out time consuming tasks.
  • Visibility and forward/reverse functions: The cordless drill driver boasts integrated LED lights for improved visibility, allowing you to work anywhere, anytime, even in dark corners and low-light areas. A forward/reverse control button ....
Check Stock