Reviews Gauge Battery Wires

Newport Vessels Trolling Motor Battery Cable Extension Kit 10-Feet

  • Comes with: 10ft Red & black 8 Gauge cables | connecting hardware | electrical tape.
  • Allows for the quick and easy lengthening of motor wires without impacting the performance of the trolling motor.
  • 8 Gauge cable ensures there is no performance loss through the extended Battery cable between the Battery and the trolling motor.
  • Electrical tape is included for your safety.
Check Stock

Newport Vessels Trolling Motor Battery Cable Extension Kit 5-Feet

  • COMES WITH: 5ft Red & Black 8 Gauge cables | Connecting hardware | Electrical tape.
  • Allows for the quick and easy lengthening of motor wires without impacting the performance of the trolling motor.
  • 8 Gauge cable ensures there is no performance loss through the extended Battery cable between the Battery and the trolling motor.
  • Cables are pure copper coated in tin for corrosion resistance (Marine Grade).
  • Electrical tape is included for your safety.
Check Stock

Upgraded 12V Voltage Gauge with Touch Switch Digital Display Volt Gauge DC 12V 24V Car Voltmeter LED Digital Display Waterproof Voltmeter Panel for Boat Marine Vehicle Motorcycle Truck ATV UTV Car 1

  • Switch Control:The voltage gauge waterproof a more accurate battery voltage. You can toggle between voltage and battery percentage or turn it off to....
  • oltage Gauge: Support 5-48V Input Voltage. Power display range 0-100%. Precise 3-bit LED digital display..
  • Check States: Battery Capacity Voltage Monitor Gauge Indicator better helps you to early notice your car voltage condition..
  • Widely Use: Fit for 5-58V Cars, Motorcycles, RV, SUV, Off-road, ATV, Boat, Marine, Ship, Truck, Tractor etc.Mini size and easy to install..
  • Package Includes: 1 x Car Voltmeter Gauge.
Check Stock

Compact COMBO-2 Deluxe Colloidal Silver Generator Package by LifeForce Devices

  • STANDARD SHIPPING IS PRIORITY MAIl. The COMBO-2 Compact Colloidal Silver Generator is a combination plug-in and rechargeable-battery-unit (batteries not included), which will also make colloidal silver without the rechargeable batteries installed, if you wish to delay the cost of purchasing them..
  • This 27 volt unit will make 32 oz of 5 ppm colloidal silver in 32 minutes. No need to spend 3 or 4 hours making the same amount of colloidal silver with 9 volt generators. LIFEFORCE DEVICES SOLD OVER 32,000 COLLOIDAL SILVER GENERATORS SINCE 2012, BECAUSE OUR PRODUCTS AND CUSTOMER SERVICE ARE THE BEST VALUE FOR THE MONEY..
  • No need for meters, laser pointers or TDS meters. Included in the package is a fully-tested timing chart, so you can accurately make 5 ppm to 40 ppm colloidal silver. Also included are DETAILED, PHOTOGRAPHIC INSTRUCTIONS..
  • No fumbling with cords and clips to attach to silver wires dangling on the lip of a container: the silver wires are held firmly in the push-button ports. Just install the two 6-inch 14 gauge 9999 pure silver wires in the push button ports, plug it into any 120-volt AC outlet, and you’re ready to make colloidal silver..
  • Simply place the battery case on top of a container of distilled water. It automatically turns ON when th....
Check Stock

9 Pack Jewelry Beading Wire 20 Gauge 24 Gauge 26 Gauge Craft Jewelry Wire Jewelry Making Supplies Craft Wire Copper Beading Wire for Jewelry Making with Cutting Pliers,3 Size

  • ... in 3 different colors of gold, silver and copper, each color accounts for 3 packs, together with 1 pair of mini pliers, 10 pieces in total, a nice combination for you to connect your separated items with wires, without worrying about the lack of using tools.
  • Various sizes: beading wires have 3 different sizes of 26 gauge, 24 gauge and 20 gauge, with the length of 11 yards, 11 yards and 5.5 yards, the assorted sizes and lengths can satisfy your craft making requirements for a lot of handicrafts. 0.8 mm/ (20 gauge) in diameter and 5 m/ 5.5 yards 3 roll ,0.5mm (24 gauge) in diameter and 11 yards (10 m) 3 roll, 0.4 mm/ (26 gauge) in diameter and 11 yards (10 m) 3 roll. The 9 rolls contain a total of 75 meters..
  • Long lasting material: these craft wires are made of firm copper, which are not easy to fade or rust under normal conditions during your long time using, bringing you much convenience.
  • And the ring making wires is simple to bend, so both beginners and experienced people can use them easily.
  • DIY for fun: these wires for jewelry making are ideal accessories in jewelry DIY making, so you can design your own necklace and match your jewelry with them.
  • You can also improve your handmade ability and get a sense of achievement in the process of DIY.
Check Stock

Amityke Power Wheels Battery Adapter for Greenworks 40V Battery,Power Tool Battery Converters Dock Power Connector Wire Robotics with 12 AWG,Power Wheels Upgrade Kit

  • 【Compatibility】Compatible with ALL Greenworks 40V Lithium-ion battery. Easy to install and lock, not easy to fall off.Work for Your Power Wheels, Toys or Robotics DIY,Upgrade Power Razor etc..
  • 【Heat-resistance wires】The charger was 5.11 inches of 12 gauge wire installed, suitable for high power tools battery and no fire & burn risks. It comes with black & red 12 AWG tinned copper wires, protects them from corrosion and making it easier to solder..
  • 【Smart Chip】The adapter is made of intelligent chips, durable and safe, it can achieve higher current conversion efficiency..
  • 【Materials】 Battery mount connector shell is made of ABS material, safe and durable, harmless to human body, also it features with strong impact resistance, stability, and corrosion resistance. All ensure a long product lifespan..
  • 【Note and Service】If you have any question about the battery, please feel free to contact us. Note:This is not a charger, it only outputs battery voltage and power directly from your battery..
Check Stock

iGreely 10 Gauge Wire Tinned Copper Tray Cable - Connect Charge Controller and Battery for Solar Panel RV Automotive Marine Boat (10FT 10AWG)

  • The iGreely 10 gauge wire can be used for solar panels, DC circuits, Boat, Marine, Automotive, RV and inverter wiring..
  • PV Wire - PV Jacket insulation is thick and sturdy, coated well, durable and very flexible, UV Resistant..
  • Wide temperature range: -40°F to 248°F (-40°C to 120°C), rated voltage is 600V, resistant to acid, alkali, oil and strong oxidation. Chemical, flame, aging, weather resistant and electrically insulating..
  • Heat-shrink tubing insulates wires and one end crimped with 3/8 inch battery terminals, coming with a pair of 5/16 battery terminals can be easily DIY with tools..
  • Positive and negative cables to connect the charge controller to the battery, also can be used as solar wires with tools to cut and crimp with new connectors..
Check Stock

MICTUNING 2/4/8/10 Gauge Car Battery Terminal Connectors Kit With Shims - Positive Negative Battery Terminal Clamp with 2 Clear Covers for Car Auto Caravan Marine Boat Motorhome (Pair)

  • Clamp Wire Tightly - These Car Battery Terminal Connectors are actually a tight fit and multiple ways to hold the wires. Look great and handy when connecting multiple size wires to the same terminal.
  • Simple Installation - They fit the battery posts with no problems or adjustments. Installation is easy and only required an Alan wrench set. The battery wire is held down tightly with special screws.
  • Positive Negative Terminal - Positive (19mm) Battery Terminal Connector + Negative (17mm) Battery Terminal Connector. 2 copper spacer shims provided in case the posts aren't big enough, also the copper material is more conductive and flexible.
  • Solid Construction - Zinc Alloy construction for strong electrical conductivity, reduce current transmission loss. Also protect battery post against corrosion for long battery life time. Bonus 2 protective cover included.
  • Four Wiring Outlet - 2/4/8/10 AWG Gauge Inputs. There are four different sizes of a wiring outlet, easy to modify the wiring.
  • Satisfaction Defender: Buy with confidence, We stand behind our products all the time, 30 days Money Back/Replacement, Worry-free 24-month Warranty, Within 4 Hours Friendly Response， Lifetime Customer Support..
Check Stock

1-Gauge 800A Heavy Duty Jumper Battery Cables 25 Ft Booster Jump Start - 25' Allows you to boost battery from behind a vehicle!

  • ...ble constructed and Dual Construction and Extra Strong-Grip Heavy duty copper-coated jaw clamps with solid copper clamps to administer optimal contact.
  • Non-slip rubber coating offers a secure connection grip..
  • You are backed by our Performance Assurance. this Booster Jumper Battery Cables come with 30 Days HASSLE-FREE RETURN & 36 months unlimited replacement promise. If you have any issues with the cables, simply contact customer service for troubleshooting help, replacement, or refund. Our aim is to make you satisfy the cables and the service we provide for you..
Check Stock

Argentyn 23 Professional Bio-Active Silver Hydrosol for Immune Support – Colloidal Silver, 23ppm, 4oz (118mL) – Twist-Top

  • STANDARD SHIPPING IS PRIORITY MAIl. The COMBO-2 Compact Colloidal Silver Generator is a combination plug-in and rechargeable-battery-unit (batteries not included), which will also make colloidal silver without the rechargeable batteries installed, if you wish to delay the cost of purchasing them..
  • This 27 volt unit will make 32 oz of 5 ppm colloidal silver in 32 minutes. No need to spend 3 or 4 hours making the same amount of colloidal silver with 9 volt generators. LIFEFORCE DEVICES SOLD OVER 32,000 COLLOIDAL SILVER GENERATORS SINCE 2012, BECAUSE OUR PRODUCTS AND CUSTOMER SERVICE ARE THE BEST VALUE FOR THE MONEY..
  • No need for meters, laser pointers or TDS meters. Included in the package is a fully-tested timing chart, so you can accurately make 5 ppm to 40 ppm colloidal silver. Also included are DETAILED, PHOTOGRAPHIC INSTRUCTIONS..
  • No fumbling with cords and clips to attach to silver wires dangling on the lip of a container: the silver wires are held firmly in the push-button ports. Just install the two 6-inch 14 gauge 9999 pure silver wires in the push button ports, plug it into any 120-volt AC outlet, and you're ready to make colloidal silver..
  • Simply place the battery case on top of a container of distilled water. It automatically turns ON when the ....
Check Stock

XTREME WEK-12 UTV Winch 12ft Battery Wire Extension Kit For CREW Style UTVs 6 Gauge

  • Includes two 12 foot 6 gauge winch battery wires to reach the battery on "CREW" style 4 seat UTVs.
  • Replaces standard 8' or shorter battery cables included with most UTV winches.
  • For: Polaris RZR-4 800, Polaris RZR-4 900, Polaris RZR-4 1000, Polaris Ranger 500 Crew, Polaris Ranger 570 Crew, 2014 Polaris Ranger 800 Crew, Polaris....
  • Includes terminals and 4 terminal boot covers.
  • Quality 6 Guage Wire Necessary for Extreme Environments.
Check Stock

Can-Am X3 Battery Jump Post Quick & Easy Charging - Fits 2 & 4 Seat Maverick X3 - Water Resistant High Voltage Cables Fits in Factory Holes and Hardware

  • WHY TAKE OUT YOUR SEAT TO CHARGE? You can attach your tender, maintainer or charger without removing that annoying rear seat. This Jump Post wires....
  • QUALITY COMES FIRST: Made in the USA High Voltage 4 Gauge battery cable. Each cable made to last and handle the high volts of a jump start...
  • WATER TIGHT CABLES: The harness is made to water resistant to IP67 Standards. Use 4 Gauge High Voltage Batter Cable not 8 gauge power wire like the....
  • FIT ALL MODELS OF X3. UTV Stereo engineered this jump post for the Can Am Maverick X3 to solve the frustrating issue of battery access. Mount made....
  • MADE IN THE USA: All the parts are made and assembled in house. UTV Stereo is an installation shop, retail/online store, and design center for....
Check Stock

WeiSen Can Am X3 Battery Jump Post with Cable, Battery Terminals Relocation Kit Quick & Easy Charging Water Resistant for Maverick X3 Polaris RZR 2 or 4 Seats, Fits in Factory Holes and Hardware

  • 【NO NEED TO TAKE OUT YOUR SEAT TO CHARGE ANYMORE】This Jump Post wires directly to your starting battery with no fuse, You can attach your tender, maintainer or charger without removing that annoying rear seat. Charging becomes easy and fast..
  • 【HIGH QUALITY CABLES】This Battery Terminals Relocation Kit Made in High Voltage 4 Gauge battery cable. Each high quality copper cable can easily handle high voltage jump starts..
  • 【WATER RESISTANT】The harness is made to water resistant to IP67 Standards. This Battery Jump Post made with high quality 4 gauge wire 50 inches long copper and premium quality PVC plastic..
  • 【FITMENT】Pefect fit Can Am Maverick X3 all model, Solve the difficult issue of battery access. This battery jump post also fit Polaris RZR Ranger General, Honda, Kawasaki all UTV/ ATV models, can be adapted to trucks, race car, travel trailers, tractor, mower, diesel, boat, etc..
  • 【PACKAGE INCLUDE】1x Battery Jump Post Kit..
Check Stock