Reviews Gate Weld on Hinges

2 Pieces 3 Heavy Duty Weldable Hinges 12 Ga Welding Long Lasting Steel Butt Hinge Corrosion and Rust Resistant Metal Weld on Hinges for Trailer Door Heavy Gates

  • What You Will Get: you will receive 2 pieces of weldable hinges, the size of them is about 3 x 3 inches, and the thickness is about 12 Ga, the weight is about 0.34 lb, besides, each hinge can bear about 25 lb of weight, you can choose them according to your needs.
  • Strong and Reliable: this weldable metal hinge is made of steel, strong and reliable, and it is with nice bearing capacity, suitable for heavy gates and doors, it is not easy to break, you can use the hinge for a long time.
  • Easy to Install: these heavy duty gate hinges do not need to be fixed with screws or other fasteners, only need to be welded at the place you want.
  • These heavy duty gate hinges are dark gray and don't have coating, they can be painted to match the metal surface to which they are attached.
  • Using Method: you can weld the metal gate hinges directly to the door, or you can drill holes and screw them on the doors (screw is not included), you can choose the installation method according to your needs.
  • Applicable Occasion: you can take these weld on steel hinges for home door use, and they are also suitable for yard gate, trailer and other occasions, strong and safe to use.
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Heavy Duty Gate Hinges 7 Inches- 2 Pack Weld On Install Black Iron Barrel Hinge 900lbs Capacity for Swing Door Trailer Ramp Metal Driveway Gate Drive Gate

  • Solid Heavy Duty Hinges: Made of durable solid steel, we offer 2 size for you to choose : 7inch and 5 inch barrel hinges, the 7 inch hinge can hold up to 900 lbs capacity and 5 inch hinge can hold up to 450 lbs capacity..
  • Weld on Install - This metal gate hinge is perfect for heavy duty swing gate, trailer gate ramp, driveway gate and the extra thick back plate make it can be easily welded on..
  • Smooth Swing Design: Features grease fitting nipple keep the internal ball bearings lubricated, making this hinges swing smoothly and extending the working life of the gate hinges..
  • Anti Corrosion & Rust-Resistant: Matte black coating finish surface, this heavy duty barrel hinges are suit for outdoor and indoor using..
  • What You Get: 2 pack heavy duty barrel hinges , our 12 month 100% money back guarantee and friendly customer service..
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Heavy Duty Gate Hinges 5 Inches - 2 Pack Black Iron Door Hinge Barrel Style 450 Lbs Capacity for Swing Door Trailer Ramp Gate - Weld On Install

  • Heavy Duty Design: Hinge length is 5 inch, barrel diameter is 1 inch, back plate width is 1 inch. Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 450 lbs capacity..
  • Multi-functions - This gate hings perfect for heavy duty swing gate, trailer gate, barrel door, weld on install easily..
  • Corrosion-resistant Coated Finish: Matte black coating for gate hinges make it anti-rust and can work in outdoor and indoor condition..
  • The Grease nipple keep the internal ball bearings lubricated and extend the working life of the gate hinges.
  • 100% Money-Back Guarantee: 90 days free replacement or refund and fast customer service..
Check Stock

Heavy Duty Gate Hinges 7 Inches - 2 Pack Black Iron Door Hinge Barrel Style 900 Lbs Capacity for Swing Door Trailer Ramp Gate - Weld On Install

  • Heavy Duty Design: Hinge length is 7 inch, barrel diameter is 1.25 inch, back plate width is 1.25 inch. Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 900 lbs capacity..
  • Multi-functions - This gate hings perfect for heavy duty swing gate, trailer gate, barrel door, weld on install easily..
  • Corrosion-resistant Coated Finish: Matte black coating for gate hinges make it anti-rust and can work in outdoor and indoor condition..
  • The Grease nipple keep the internal ball bearings lubricated and extend the working life of the gate hinges..
  • 100% Money-Back Guarantee: 90 days free replacement or refund and fast customer service..
Check Stock

Weld-On Hinges 1Pair

  • Delivered in a thin layer of oil to protect from rust during shipping. This ensures you receive the product at its best state.
Check Stock

Heavy Duty Guardian Compatible Gate Adjustable Hinge Driveway Bolt On Gate & Post with Zerk, Sold in Pairs

  • Largest weld surface with Large BOLT ON Plates which makes easy to install and mount.
  • Grease zert for easy lubrication, ADJUSTABLE GATE HINGE - BOLT ON GATE & POST WITH ZERK, size: 7 3/4 " High x (from 3 1/4" to 3 3/8" wide).
  • Maximum weight rating of 1000 lbs per pair of hinges.
Check Stock

Barrel Gate Hinge 7\ Heavy Duty Grease Zerk fitting Welding Plate (Lot 2 Pair)

  • Seven Inch Barrel Gate Hinges include: 1 male barrel, 1 female barrel, steel ball and grease zerk fittings. The welding plates are steel and hinge pins are high quality copper. Holds up to 900 pounds..
  • Each hinge set measures 7" long and 1.5" wide. The height of the hinge is 1.625". Each welding plate measures 1.94" long and 1.25" wide. The thickness of the plates is 0.375"..
  • Easy to Mount - Easy to attach to gate or door and the mounting posts. Can be used with spacers. Clearly defined mounting plates make it easy to know how far along to weld. Pre-painted black..
  • Each pair of barrel gate hinges holds up to 900 pounds. They are perfect solutions for driveway or security gates, swinging security doors, trailer gates, and more!.
  • Hinges slide apart easily if you need to temporarily remove the gate or door, and slide back together just as easily..
Check Stock

Bobco Metals Steel 5\ Barrel Gate Hinges for Heavy Gates & Doors - Welding on Larger Iron or Steel Gates Up to 450 Pounds - Grease Zerk Fitting - Steel Barrels & Copper Pin - 2 Units

  • 5" Barrel Gate Hinges are perfect for mounting a wide variety of gates and doors. Each hinge has four parts: 1 male barrel, 1 female barrel, steel ball and grease zerk fittings. The hinges with attached welding plates are made from steel. The hinge pins are high quality copper..
  • Each hinge set measures 5" long and 1" wide. The height of the hinge is 1.25". Each welding plate measures 1.94" long and 1" wide. The thickness of the plates is 0.375"..
  • Easy to Mount - these barrel hinges are easy to attach to your gate or door and the mounting posts. Clearly defined mounting plates make it easy to know how far along to weld. They are also easy to use with spacers to allow gates or doors to open as far as the post will allow. All hinges come pre-painted black, but are easy to repaint if you prefer a more neutral shade..
  • Each pair of barrel gate hinges holds up to 450 pounds. They are perfect solutions for driveway or security gates, swinging security doors, trailer gates, and more!.
  • Hinges slide apart easily if you need to temporarily remove the gate or door, and slide back together just as easily..
Check Stock

Heavy Duty Gate Hinge Pair 7 Inch Barrel Style Good Load Capacity - Weld On Install (7 Inch)

  • ...es: driveway gate, metal gate, trailer gate, swing gate, etc. It can prevent the gate from sagging and hold them more stable..
  • ✅ FULL PACKAGE: include 1 male barrel, 1 female barrel, steel ball, and grease zerk fittings..
  • ✅ EASY ASSEMBLY: good base to weld on. Before welding, you need to remove the paint covering hinges, however, after that, you can paint and this will keep these hinges from rusting and use for a long time. You will see a steel ball bearing and that is what the pinned side of the hinge rides on. There is a nipple that is for applying grease to keep things smooth..
  • ✅ YOUR SATISFACTION is our priority: If you are not completely satisfied with your purchase, please let us know and we will refund your money, no questions asked. Please let me know if you need any additional information, we will find the best solution for your need..
Check Stock

LA Ornamental Heavy Duty Guardian Compatible Gate Adjustable Hinge Driveway Bolt On Gate & Post with Zerk

  • Largest weld surface with Large BOLT ON Plates which makes easy to install and mount.
  • Grease zert for easy lubrication, ADJUSTABLE GATE HINGE - BOLT ON GATE & POST WITH ZERK, size: 7 3/4 " High x (from 3 1/4" to 3 3/8" wide).
  • Maximum weight rating of 1000 lbs per pair of hinges.
Check Stock

Bobco Metals 3\ Heavy Duty Weldable Hinges - Steel Butt Hinge Design for Heavy Gates & Doors - Long Lasting - Corrosion & Rust Resistant - 1 Pair

  • Bobco Metals 3" Heavy Duty Weldable Hinges are made of good quality steel that is durable, sturdy, and long-lasting use. It is easy to use, perfect for high-stress applications, such as holding up heavyweight gates, doors, and more..
  • These weldable hinge plates are 1/4" thick and weighs 0.25 lbs each. They are designed to connect the gate to the post, and typically are used where a hinge must be welded to another metal surface. Moreover, when a heavy duty drill bit is used, they can have holes drilled in them for screw mounting..
  • Weld-on hinges won’t have to use screws or other fasteners. Also, these hinges are suited for permanent applications than bolt-on hinges. They provide more strength and security and a good choice for your gates, trailers, door, or for tailgates. Thus, making the installation easier..
  • These steel hinges are uncoated, and are their natural dark grey. They can be painted to match the metal surface to which they are attached..
  • All hinges are packaged with care. Rest assured, your hinges will arrive in perfect condition and ready to use out of the box!.
Check Stock