Reviews Gaskets For Panel Walls

DreamLine Unidoor Plus 35 in. W x 34 3/8 in. D x 72 in. H Frameless Hinged Shower Enclosure in Chrome, SHEN-24350340-01

  • Model Size: 35 in. W x 34 3/8 in. D x 72 in. H.
  • Configuration: Shower Door with Inline and Return panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Return Panel attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Return panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 34-3/8 in. D x 35 in. W x 72 in. H Chrome finish hardware. Door walk-in: 28 in. Panel(s): 6 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single hinged door, one stationary panel and one return panel.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges. Reversible for right/left door opening installation.
Check Stock

DreamLine Enigma-X 34 1/2 in. D x 48 3/8 in. W x 76 in. H Fully Frameless Sliding Shower Enclosure in Brushed Stainless Steel, SHEN-6134480-07

  • Model Size: 46 in. W x 34 3/8 in. D x 72 in. H.
  • Configuration: Shower Door with Inline and Return panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Return Panel attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Return panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 34-3/8 in. D x 46 in. W x 72 in. H Brushed Nickel finish. Door walk-in: 23 in. Panel(s): 22 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single hinged door, one stationary panel and one return panel.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges. Reversible for right/left door opening installation.
Check Stock

DreamLine SHDR-6348760-04 Shower Door, 44-48\ W x 76\ H, Brushed Nickel

  • Double sliding bypass configuration allows entry from left or right side.
  • Quality 5/16 in. (8 mm) thick certified clear tempered glass.
  • DreamLine exclusive ClearMax water and stain resistant glass coating.
  • Specially designed rollers create a smooth, quiet gliding operation.
  • Dual towel bars double as handles on each panel.
  • Aluminum water guards accommodate up to 1/4 in. for out-of-plumb (uneven) walls.
  • Model can be trimmed up to 4 in. for width adjustment.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Minimum threshold depth of 2 3/4 in. is required for proper installation.
  • Drilling into the threshold is required for installation of this product.
  • Anodized aluminum water guards allow 1/4 in. for out-of-plumb (uneven walls).
  • Top and bottom guiderails can be trimmed 4 in. for width adjustment.
  • 5/16 in. (8 mm) ANSI certified clear tempered glass.
Check Stock

DreamLine Unidoor Plus 60 1/2 - 61 in. W x 72 in. H Frameless Hinged Shower Door in Chrome, SHDR-246057210-01

  • Model Size: 60 1/2 - 61 in. W x 72 in. H.
  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 60-1/2 to 61 in. W x 72 in. H Chrome finish. Door walk-in: 29 in. Panel(s): 30-1/2 to 31 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges (5 degree offset). Frameless glass design.
  • Wall studs or other reinforcement behind finished walls r....
Check Stock

DreamLine Unidoor Plus 33 1/2 - 34 in. W x 72 in. H Frameless Hinged Shower Door in Chrome, SHDR-243357210-01

  • Model Size: 33 1/2 - 34 in. W x 72 in. H.
  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 33-1/2 to 34 in. W x 72 in. H Chrome finish hardware. Door walk-in: 26 in. Panel(s): 6-1/2 to 7 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges (5 degree offset). Frameless glass design.
  • Wall studs or other reinforcement behind finished ....
Check Stock

DreamLine Unidoor Plus 58-58 1/2 in. W x 72 in. H Frameless Hinged Shower Door in Brushed Nickel, SHDR-245807210-04

  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 58 to 58-1/2 in. W x 72 in. H Brushed Nickel. Door walk-in: 27 in. Panel(s): 30 to 30-1/2 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges (5 degree offset). Frameless glass design.
  • Wall studs or other reinforcement behind finished ....
Check Stock

DreamLine Unidoor Plus 57 1/2 - 58 in. W x 72 in. H Frameless Hinged Shower Door in Brushed Nickel, SHDR-245757210-04

  • Model Size: 57 1/2 - 58 in. W x 72 in. H.
  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 57-1/2 to 58 in. W x 72 in. H Brushed Nickel. Door walk-in: 26 in. Panel(s): 30-1/2 to 31 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges (5 degree offset). Frameless glass design.
  • Wall studs or other reinforcement behind finishe....
Check Stock

DreamLine Unidoor Plus 33 1/2 - 34 in. W x 72 in. H Frameless Hinged Shower Door in Brushed Nickel, SHDR-243357210-04

  • Model Size: 33 1/2 - 34 in. W x 72 in. H.
  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 33-1/2 to 34 in. W x 72 in. H Brushed Nickel finish. Door walk-in: 26 in. Panel(s): 6-1/2 to 7 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges (5 degree offset). Frameless glass design.
  • Wall studs or other reinforcement behind fi....
Check Stock

DreamLine SHDR-176076G-09 Frameless Sliding Shower Door, 58-60 in. W x 76 in. H, Satin Black

  • Double sliding bypass configuration allows entry from left or right side.
  • Quality 5/16 in. (8 mm) thick certified clear tempered glass.
  • DreamLine exclusive ClearMax water and stain resistant glass coating.
  • Specially designed rollers create a smooth, quiet gliding operation.
  • Dual towel bars double as handles on each panel.
  • Aluminum water guards accommodate up to 1/4 in. for out-of-plumb (uneven) walls.
  • Model can be trimmed up to 4 in. for width adjustment.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Minimum threshold depth of 2 3/4 in. is required for proper installation.
  • Drilling into the threshold is required for installation of this product.
  • Anodized aluminum water guards allow 1/4 in. for out-of-plumb (uneven walls).
  • Top and bottom guiderails can be trimmed 4 in. for width adjustment.
  • 5/16 in. (8 mm) ANSI certified clear tempere....
Check Stock

DreamLine Unidoor Plus 58-58 1/2 in. W x 72 in. H Frameless Hinged Shower Door in Oil Rubbed Bronze, SHDR-245807210-06

  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • Limited Lifetime Manufacturer Warranty. (Oil Rubbed Bronze and Satin Black finishes limited to 1 (one) year warranty).
  • 58 to 58-1/2 in. W x 72 in. H Oil Rubbed Bronze. Door walk-in: 27 in. Panel(s): 30 to 30-1/2 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. ....
Check Stock

DreamLine Unidoor 39-40 in. W x 72 in. H Frameless Hinged Shower Door with Shelves in Brushed Nickel, SHDR-20397210S-04

  • Configuration: Shower Door with Inline panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Inline panel is attached to the wall by anodized aluminum profile.
  • Wall profile allows 1 in. of adjustment for width or out-of-plumb (uneven walls).
  • Reversible for a right or left door opening.
  • Inline panel requires Glass Shelves for stability.
  • Solid brass wall-to-glass self-closing hinges.
  • Matches any single threshold SlimLine shower base 42 in. W (sold separately).
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
Check Stock

DreamLine Unidoor 59-60 in. W x 72 in. H Frameless Hinged Shower Door with Shelves in Brushed Nickel, SHDR-20597210S-04

  • Configuration: Shower Door with Inline panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Inline panel is attached to the wall by anodized aluminum profile.
  • Wall profile allows 1 in. of adjustment for width or out-of-plumb (uneven walls).
  • Reversible for a right or left door opening.
  • Inline panel requires Glass Shelves for stability.
  • Solid brass wall-to-glass self-closing hinges.
  • Optional SlimLine matching shower base available on select model sizes (sold separately).
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
Check Stock

Delta Shower Doors SD3957012 Classic Semi-Frameless Contemporary Sliding Shower 60\x71\

  • Hardware Finish – Chrome | Quality 1/4 in. (6mm) thick Clear certified tempered glass | Pictured SlimLine shower base is not included (sold separately).
  • Dimensions – 44-48” W x 1” D x 72” H | Weight – 92.59 lbs. | Fits openings from 44” up to 48” | Walk-through – 15-19” W x 70.25” H.
  • Configuration consists of a Stationary Panel and Sliding Door.
  • Convenient towel bar on the Stationary Panel | Reversible for a right or left door opening to fit your specific layout.
  • Up to 1 in. adjustment per side for out-of-plumb (uneven) walls within wall profiles | Up to 4 in. for width adjustment by trimming guide rails.
  • Configuration consists of a Sliding Door and a Stationary Panel.
  • Unit reversible for a right/left door opening to fit any layout. Wall profiles allow up to 1 in. adjustment per side for out-of-plumb (uneven walls).
  • 1/4 in. (6mm) thick ANSI certified tempered glass. Chrome finish.
  • Optional SlimLine matching shower base sold separately. IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls).
  • Professional installation recommended. Limited Lifetime Warranty.
Check Stock