Reviews Gas Welding Kits

OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8\ UNF-18RH Fittings

  • Premium rubber welding gas regulator hose, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
  • 6.56 feet long inert gas hose, crimped 5/"8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator..
  • 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
  • This welding gas hose compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
  • This inert welding hose suits for our OYHBO Argon CO2 Regulator. We supply all kind of gas welding equipment & accessories, you can visit our store to purchase. Thanks..
Check Stock

WeldingCity 5-pk Gas Nozzle 169-715 169715 1/2

  • Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
  • Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
  • Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
  • tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
  • Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Goplus® 50ft Twin Welding Torch Hose Oxy Acetylene Oxygen Cutting 1/4-Inch 300psi

  • 【Compatible with Both Oxygen and Acetylene】 Our twin gas welding hose is color coded. The green one is for Oxygen and the red one is for Acetylene and fuel gas. What you should note here is that the maximum working pressure of our oxyacetylene twin welding hose is 300psi. Broken pressure up to 900psi..
  • 【High Quality Rubber Material】 Made of high quality rubber material, our rubber welding hose be used on extreme environment. Not only does it have excellent performance in low temperature, even in subzero temperatures, but also has good oil and abrasion resistance, which prolongs the life of the hose in a maximum effect..
  • 【Sufficient Length and Standard Diameter】 The whole length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. Other than that, with standard diameter, 1/4”, our oxyacetylene twin welding hose has wide application, which meets most people’s needs..
  • 【Multifunctional Twin Welding Hose】 On the one hand, our twin welding hose can be used for welding machine. On the other hand, it has outstanding performance in gas cutting function, as well. Except for that, the twin gas welding hose can also be used for transporting gas, which is a good choice for industry and agriculture....
Check Stock

WORTHINGTON CYLINDER 332585 14.1 oz Pre-Filled MAP-Pro Gas Torch Style Cylinder

  • Welding Gas to Your Door - Get PrimeWeld's industrial grade 75 %Argon 25% CO2 gas cylinder delivered right to your door. We offer different mixtures for any application, and you can purchase a tank without worrying about costly rental fees or wasted trips out to your local welding supply shop..
  • The Specs - Our 125CF Argon CO2 welding gas tank arrives full and ready to go. Unlike competitors, our cylinders come fully certified, DOT 3AA, and 10-year date stamped. You'll never have to worry about your tank being turned away for a refill..
  • Best Gas for MIG - Our blend of Argon CO2 is the perfect all-purpose MIG welding gas. It's a cost-effective option that can be used to weld most metals, including mild steel and nonferrous metals, ensuring a desirable combination of arc stability, puddle control, and reduced spatter..
  • No Costly Fees - In the long run, our welding tank is low cost to own compared to the high leasing fees you'll find at your local welding supply. No deposits to put down, and you won't be locked in to the same store for refills..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your Argon CO2 welding gas tank, simply reach out to Customer Support and we'll make things right for you!.
Check Stock

ARKSEN MIG-130 Welding Machine Gas Less Flux Core Wire DIY Home Welder Automatic Feeding Yellow

  • Household smart welder: our ARKSEN welding machine is compact and exquisite MIG Gas welder, made of heavy duty stainless steel body, painted with....
  • Flux-cored wire-no Gas welder: our ARKSEN welding machine uses convenient flux-cored wire, self release metal-inert Gas while welding, prevent....
  • Adjustable welding speed: Our ARKSEN welding machine features a wire feeding speed adjust rotary knob. 10 levels of wire feeding speeds for your....
  • Portable design & wide applications: Our ARKSEN welding machine is perfect for welding normal thin steel and iron, perfect for home DIY and general....
  • Many complimentary necessities: The ARKSEN welding machine comes with two air-vent on the machine to help heat dissipation. The welding gun with full....
Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • The application of IGBT technology has significantly enhanced the welding machines reliability and turned them into a lighter and compact version . Also you canot ignore about this wire feed welder is the integrated wire feeder, to whom you should thank when you see a smooth wire feed. 2lbs quality welding wire included..
  • MULTIFUNCTIONS IN ONE MACHINE- You can work with CO2 gas, mixed gas or without gas. Welding machine mig uses 0.8mm or 1.0mm flux core wire.Gasless(flux core wire) and Gas(solid wire) welding: supports 2 lbs/ 10 lbs .030’’ or .040’’ wire to weld over. 030’’ thickness carbon steel stainless steel/mild steel. Duty Cycle: 60% at 130A. LIFT TIG Welding is not high frequency TIG mode, just switch to “LIFT TIG” on the panel. Stick Welding switch to “MMA” on the panel and adjust the current as needed..
  • WORKS WELL AND EASY TO PICK UP 3 in 1 welder - This portable welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs gr....
Check Stock

Heavy Duty Cutting Torch, Oxygen/Acetylene Cutting Welding Torch Stainless Steel Gas Welding Burning Torch for Industrial Workshops, Metal Cutting and Welding

  • Heavy Duty Cutting Torch, Oxygen/Acetylene Cutting Welding Torch Stainless Steel Gas Welding Burning Torch for Industrial Workshops, Metal Cutting and Welding.
  • Great for Different Gas: suitable for Oxygen-acetylene, propane, butane, natural gas and liquefied petroleum gas. Before the torch is ignited, the air-tightness of the air valves at the connection should be checked. the newly used cutting torch, the shooting and suction capacity should also be checked..
  • Cutting and Welding: Cutting range: 3-150mm / 0.12-5.90 inches, welding range: 9mm / 0.35 inches. Thread 7/8-20 at the nozzle, thread 9/16-18 at the gas port. Please see photo for more details..
  • No Gas Leakage: Conical step leakage proof interface is stable and firm, possesses good sealing, no falling off, no air leakage, durable and safe to use. When the cutting torch is ignited, the acetylene valve should be opened first, and then the oxygen valve should be opened, and the mouth should not point to people or animals..
  • Multi-purpose: Widely used in workshops, metal cutting and welding, mechanical maintenance, and more. If you have any questions or concerns, please be sure to send us a message, thank you!.
Check Stock

PrimeWeld 75% Argon 25% CO2 Bottle 125CF | DOT 3AA | USA CGA 580 Valve | Best Gas Blend for MIG Welding | Cylinders Full & Ready to Use

  • Welding Gas to Your Door - Get PrimeWeld's industrial grade 75 %Argon 25% CO2 gas cylinder delivered right to your door. We offer different mixtures for any application, and you can purchase a tank without worrying about costly rental fees or wasted trips out to your local welding supply shop..
  • The Specs - Our 125CF Argon CO2 welding gas tank arrives full and ready to go. Unlike competitors, our cylinders come fully certified, DOT 3AA, and 10-year date stamped. You'll never have to worry about your tank being turned away for a refill..
  • Best Gas for MIG - Our blend of Argon CO2 is the perfect all-purpose MIG welding gas. It's a cost-effective option that can be used to weld most metals, including mild steel and nonferrous metals, ensuring a desirable combination of arc stability, puddle control, and reduced spatter..
  • No Costly Fees - In the long run, our welding tank is low cost to own compared to the high leasing fees you'll find at your local welding supply. No deposits to put down, and you won't be locked in to the same store for refills..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your Argon CO2 welding gas tank, simply reach out to Customer Support and we'll make things right for you!.
Check Stock

Argon CO2 Regulator Gauge Welding Gas Regulator with 6.6Ft Gas Hose CGA580 Inlet Connection 0-4500PSI/0-10BAR Input Pressure

  • 【CGA-580 Connection】The Argon regulator with CGA-580 Inlet Connection fits standard Argon, CO2 Gas Tanks from any supplier. The gas regulator is a standard pressure control valve that reduces the input pressure from gas stored in a tank.
  • 【Accurate Pressure Gauge】Input pressure: 0-4500PSI. The Argon CO2 Regulator has two Easy to read pressure gauge, the argon flow meter provides accurate measurement of gas. And it has Internal safety pressure relief design to protect you form danger..
  • 【Brass Material】Our welding gas regulator is made of solid brass, so the surface can keep a good looking for a long time. Precision thread design ensures high sealing performance and avoids gas leakage..
  • 【General Feature】A 6.6Ft gas hose ensures your tanks at a safe distance from your Mig Tig welding projects, 5/8'' Female and 9/16" male outlet connection. And the filter structure at the CGA-580 connection effectively prevent debris in the argon tank entering the gauge with the airflow..
  • 【Application】Our welding regulator is pefect for MIG and TIG welding. It is an economic alternative for you to get more precise gas metering, like the accurate reading of argon regulator would help you to adjust pressure before welding..
Check Stock

OYHBO Argon/CO2 Flow Meter Gas Regulator Guage for TIG MIG Welder Welding Gas-saving CGA580 Inlet

  • ✔CGA580 Inlet Fitting - This gas regulator can be used with standard Argon/CO2 gas tanks. You can connect the welding hose via male 5/8UNF-18RH fitting. Easy to install. Works well on tig, mig welders..
  • ✔High Precision - The gas regulator gauge is easy to read from 0-3500psi, the output flow is adjustable from 5 to 60 scfh, and is indicated by a ball which moves up and down in the flow tube..
  • ✔Gas-saving & No Leaks - With a Gas-saving feature(normally can save 35%-65%), our argon regulator for welding is more economical and practical than others on the market. Two-stage pressure relief structure ensures fast and stable transmission without leaking. There is a sound warning like whistling when over pressure and leaking during use, make your welding more safer..
  • ✔Heavy Duty&Rust-proof - Our Argon CO2 Gas Regulator features heavy duty brass body, which can withstand harsh environments. Its base is made of qualified aluminium alloy, not get rusty and longer using-life..
  • ✔Ideal for TIG/MIG Welding - Our argon flow meter gas regulator is accurate and efficient by professional design, ideal for TIG/MIG welding, cutting, chemical and electronics industry. If for any reason you're not 100% SATISFIED, please let us know. We will provide you with the best....
Check Stock

AZZUNO 200A MIG Welder,110V/220V Dual Voltage multiprocess welder,Gas Gasless MIG Welding Machine,4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick ARC Welder (Grey)

  • 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose..
  • Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it..
  • Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 4.5mm..
  • Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 0.5MM-3MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E7018, E6013..
  • Powerful And Safe Machine:This 200A Welding machine can weld mild up to 4.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe..
Check Stock

WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.030\ (0.8mm) 8\-spool

  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • spool wrapped in moisture-resistant plastic film..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Typical element content (wt%) in product: C=0.08.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.035' (0.9mm) 8'-spool

  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • spool wrapped in moisture-resistant plastic film..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Typical element content (wt%) in product: C=0.08.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock