Reviews Gas Water Pipe Line

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • ...5/ 16 -16 UN x 3/4'' FIP, 2 pc 15/ 16 -16 UN x 3/4'' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solutio....
Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • INCLUDES EVERYTHING FOR INSTALLATION - This Gas Appliances Installation Kit Includes 22” flexible gas line (with 1/2" Female Flare on both end) , 3 different adapters (1/2" Male Flare x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
Check Stock

Koehler Enterprises KE001 Hose Clamp Emergency Kit, 6 Piece

  • [Package Contents]:The 10AN hose separator 5pcs with allen wrench 1pc,please ensure the sies of the hose separator clamp match the OD of your hose.
  • [Quality Material]:The hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.Metal Suits -10AN SS braided hose secure tight with hex allen head bolt.more easy for you to install them..
  • [ Compatibility and Reusable ]:Our guarantee that this product is not disposable, and you can easily reuse them. You can use them for Fit for 5/8 Fuel Line, Oil Line, Brake Line, Water Pipe and Gas Line and so on.
  • [Convenient and tidy]:The hose line separator clamps are used to improve the tightness between multiple pipes and make the hoses more organized and tidy, especially in cars or other small spaces.
  • [Tip]:Our hose separator clamp suit,usually used forwater Hose pipe Gas,Line,Fuel Line and other purposes,Please check the size and pictures carefully before buying,If you have any questions, Please contact us, We will be happy to provide you with the best service..
Check Stock

Best Brose 3/4 Tubing Pipe KIT 33ft,Corrugated Stainless Steel Tubing with 2 Male Fittings 33

  • 【Sturdy material 】-The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch....
  • 【SIZE】 -Length 33FT, 3/4" "pipe size: 16mm inner diameter x 20mmOD (0.625" inner diameter x 0.787 "outer diameter)，Underground gas piping....
  • 【INSTALLATION POSTIONS】- gas line For use with Natural Gas and Liquid Propane applications，Connects any outdoor NG appliance to the gas supply....
  • 【SCOPE APPLICATION】For use with Natural Gas and Liquid Propane applications，propane fire pit，Natural gas fire pit，gas range，water heater.
  • 【MEASILY BEND AROUND CORNERS】- Corrugated Stainless Steel Tubing is great for installation of gas appliances. easily snakes into attic and....
Check Stock

Best Brose 1/2 Tubing Pipe KIT 70ft,Corrugated Stainless Steel Tubing with 2 Male Fittings 70

  • 【Sturdy material 】-The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch....
  • 【SIZE】 -Length 66FT, ½ "pipe size: 12mm inner diameter x 16mmOD (0.48" inner diameter x 0.63 "outer diameter)，Underground gas piping systems.
  • 【INSTALLATION POSTIONS】- gas line For use with Natural Gas and Liquid Propane applications，Connects any outdoor NG appliance to the gas supply....
  • 【SCOPE APPLICATION】For use with Natural Gas and Liquid Propane applications，propane fire pit，Natural gas fire pit，gas range，water heater.
  • 【MEASILY BEND AROUND CORNERS】- Corrugated Stainless Steel Tubing is great for installation of gas appliances. easily snakes into attic and....
Check Stock

Harvey 017065 Gas Line PTFE Thread Seal Tape

  • Yellow gas line thread seal tape with PTFE.
  • Extra heavy, full density PTFE tape especially for gas lines.
  • Recommended leakproof sealant for lines carrying natural gas, propane, butane.
  • and water, oil, and chemical installations.
  • Use on pipe, conduit, vales, bolts, anything with a thread.
Check Stock

iSpring 14702 APR40 Pressure Regulator Filter Protection Valve with 1/4\ Quick Connect, 40 Psi, white

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 4" - 8" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as 13/16 inch..
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16"..
  • MARKING - Model: RV47L, Marking: 1/2 PSIG, Po 4" - 8". Inlet pressure 1/2 PSI. Adjustable outlet pressure 4" - 8" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Overall Dimension: 2-7/8” W x 2-1/4” D x 2-1/2” H. This is a small size regulator. Refer to pictures for detailed dimensions..
Check Stock

TEHAUX 20pcs Pipe Faucet Plastic Cover Decoration Water Pipe Wall Cover for Home

  • These pipe cover decoration can be widely fitted to existing pipeworks, such as water pipes, gas pipes, angle valves, heating pipes, faucets, radiator, drain line, etc..
  • Made of premium PP plastic, high heat resistance and corrosion resistance, fit many occasions..
  • The package quantity can meet your multiple needs and sufficient for your daily use..
  • Pipe cover decoration is very easy to install, you can open the buckle, put tube in it, then buckle it..
  • Can be decorated with a pipe cover. and it can beautify, cover and block the pipe holes..
Check Stock

TEHAUX 5pcs Pipe Faucet Plastic Cover Decoration Water Pipe Wall Cover for Home

  • Can be decorated with a pipe cover. and it can beautify, cover and block the pipe holes..
  • Pipe cover decoration is very easy to install, you can open the buckle, put tube in it, then buckle it..
  • These pipe cover decoration can be widely fitted to existing pipeworks, such as water pipes, gas pipes, angle valves, heating pipes, faucets, radiator, drain line, etc..
  • The package quantity can meet your multiple needs and sufficient for your daily use..
  • Made of premium PP plastic, high heat resistance and corrosion resistance, fit many occasions..
Check Stock

Maxitrol RV48L Natural Gas Pressure Regulator 1/2 FPT Thread 13/16 In and Out Opening 1/2 PSIG In 3 -6 WC Out

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
  • MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....
Check Stock

DCT Multi-Angle Adjustable 13ft Band Wood Corner Clamp – Woodworking Clamping Kit that Clamps Picture Frames & More

  • ... clamp is suitable for pipes with a diameter of 12mm/0.47inch. The diameter of the mounting hole is 4mm/0.15inch, the width is 11.7mm/0.46inch, and the thickness is 0.5mm/0.02inch..
  • HIGH QUALITY CLAMP - Tube strap tension clip is made of high-quality 304 stainless steel material, high hardness, corrosion resistance, water resistance, oil resistance. The surface is treated with rust prevention, and it can be used in a humid environment without worrying about rust. The metal pipe clamp adopts superb production technology, the surface is smooth and burr-free..
  • MULTIPLE USE - The u-tube clamp is widely used in stainless steel pipes, rubber hoses, gas pipes, plastic steel pipes, drainage pipes, etc. The rigid pipe strap is suitable for fixing pipe line with oil, water and gas..
  • SLOTTED DESIGN - The slotted design is more sturdy and not easily deformed. The U-shaped slotted design is suitable for fixing pipes on various surfaces and supporting structures. The metal pipe strap can be fixed on the wall and ceiling with screws or expansion screws, and the installation is simple fast..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top priority. If you have any quest....
Check Stock

Shok Blok SB-FPV-40 Water Filter Pressure Regulator Protection Valve for RO & Filter Systems - 1/4\ QC Ports, 40 PSI

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 3/4" Inlet & 3/4" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1-1/16 inch as shown in the picture’s table..
  • CAUTION - This regulator has 1-1/16" openings for 3/4" gas pipes. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16.
Check Stock

10AN Femlae to 8AN Male Flare Reducing Hose Union Fittings Aluminum AN10 to AN8 Reducer Fuel Oil Line Adapter Black

  • JIC -10 AN (7/8-14) UNF female to male flare -8 AN (3/4"-16) UNF Thread expander / reducer pipe connector.
  • Made of High Performance Lightweight 6061 T6 CNC Machined Billet Aluminum Material.
  • Black anodized finish for durability, long last and strength.
  • Universal fit. such as: Oil/ Fuel/ Water/ Gas/ Fluid/ Air Line.
  • AN Female to Male Oil Fuel Line Pipe Redecer Extensions Fitting Adapter.
Check Stock