Reviews Gas Transmission Pipe Line

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • INCLUDES EVERYTHING FOR INSTALLATION - This Gas Appliances Installation Kit Includes 22” flexible gas line (with 1/2" Female Flare on both end) , 3 different adapters (1/2" Male Flare x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

  • 【Size】- 37FT length 1/2" gas pipe size: 12mm inner diameter x 16mmOD (0.48" inner diameter x 0.63 "outer diameter), so Our natural gas hose can provide up to 100,000 BTU/hour of Flow Capacity, and provide sufficient airflow for larger sizes equipment to meet your more needs..
  • 【Application 】- Gas line Used to Connects any indoor/outdoor Natural Gas or Liquid propane applications to the gas supply piping, such as fire pit gas tube, gas range pipe, water heater gas hose,Generator gas tube,Compressor gas tube,Grill gas line.etc.
  • 【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
  • 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, re....
Check Stock

EVIL ENERGY 10AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 10FT Black

  • Application: AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line..
  • Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Inside Diameter: 9/16". Outside Diameter: 0.78inch. Length: 10 Feet. Please measure before purchase!.
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Koehler Enterprises KE001 Hose Clamp Emergency Kit, 6 Piece

  • [Package Contents]:The 10AN hose separator 5pcs with allen wrench 1pc,please ensure the sies of the hose separator clamp match the OD of your hose.
  • [Quality Material]:The hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.Metal Suits -10AN SS braided hose secure tight with hex allen head bolt.more easy for you to install them..
  • [ Compatibility and Reusable ]:Our guarantee that this product is not disposable, and you can easily reuse them. You can use them for Fit for 5/8 Fuel Line, Oil Line, Brake Line, Water Pipe and Gas Line and so on.
  • [Convenient and tidy]:The hose line separator clamps are used to improve the tightness between multiple pipes and make the hoses more organized and tidy, especially in cars or other small spaces.
  • [Tip]:Our hose separator clamp suit,usually used forwater Hose pipe Gas,Line,Fuel Line and other purposes,Please check the size and pictures carefully before buying,If you have any questions, Please contact us, We will be happy to provide you with the best service..
Check Stock

Best Brose 3/4 Tubing Pipe KIT 33ft,Corrugated Stainless Steel Tubing with 2 Male Fittings 33

  • 【Sturdy material 】-The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch....
  • 【SIZE】 -Length 33FT, 3/4" "pipe size: 16mm inner diameter x 20mmOD (0.625" inner diameter x 0.787 "outer diameter)，Underground gas piping....
  • 【INSTALLATION POSTIONS】- gas line For use with Natural Gas and Liquid Propane applications，Connects any outdoor NG appliance to the gas supply....
  • 【SCOPE APPLICATION】For use with Natural Gas and Liquid Propane applications，propane fire pit，Natural gas fire pit，gas range，water heater.
  • 【MEASILY BEND AROUND CORNERS】- Corrugated Stainless Steel Tubing is great for installation of gas appliances. easily snakes into attic and....
Check Stock

Best Brose 1/2 Tubing Pipe KIT 70ft,Corrugated Stainless Steel Tubing with 2 Male Fittings 70

  • 【Sturdy material 】-The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch....
  • 【SIZE】 -Length 66FT, ½ "pipe size: 12mm inner diameter x 16mmOD (0.48" inner diameter x 0.63 "outer diameter)，Underground gas piping systems.
  • 【INSTALLATION POSTIONS】- gas line For use with Natural Gas and Liquid Propane applications，Connects any outdoor NG appliance to the gas supply....
  • 【SCOPE APPLICATION】For use with Natural Gas and Liquid Propane applications，propane fire pit，Natural gas fire pit，gas range，water heater.
  • 【MEASILY BEND AROUND CORNERS】- Corrugated Stainless Steel Tubing is great for installation of gas appliances. easily snakes into attic and....
Check Stock

PONO Automotive Hose Clamp Pliers Auto repair Tool w/ Locking Ratchet, Swivel Flat Band for Removal / Installation of Ring-Type / Flat-Band Hose Clamps, Quick Release Fuel/Coolant/Radiator Cable Clip

  • Fuel line separator clamp: Secure and separate transmission lines to keep your project clean and organized..
  • Application: This 6AN fuel line Divider fits for most 6AN hose,such as fuel lines, oil lines, brake lines, water pipe, gas lines, etc..
  • Size:Inside diameter: 0.51inch /13mm,please mesure the OD of your hose before purchase..
  • EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

  • Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
  • Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
  • Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
  • Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
  • Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
  • Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock

Honeywell Natural Gas Permasert Version 2.0 Stab Coupling - 1 CTS - PN PC50103

  • Product: 1" CTS Stab Coupling Permasert Version 2.0 P/N: PC50103.
  • Details: 1-1/8" OD, 0.090/0.099/0.102 wall.
  • Fits line size: 1" inch CTS PE Tubing (1-1/8" Outer Diameter).
  • Used on Medium Density (yellow) PE Polyethylene plastic pipe for repairs or joining lengths together. Works for Natural Gas (NG) or Propane (LPG).....
  • IMPORTANT NOTE: There are various pipe sizes described as 1 Inch. This for CTS pipe not IPS pipe. These are different pipe sizing standards, so please....
Check Stock

Harvey 017065 Gas Line PTFE Thread Seal Tape

  • Yellow gas line thread seal tape with PTFE.
  • Extra heavy, full density PTFE tape especially for gas lines.
  • Recommended leakproof sealant for lines carrying natural gas, propane, butane.
  • and water, oil, and chemical installations.
  • Use on pipe, conduit, vales, bolts, anything with a thread.
Check Stock

DuraChoice 2-1/2\ Oil Filled Vacuum Pressure Gauge, Water Oil Gas - Stainless Steel Case, Brass, 1/4\ NPT, Lower Mount Connection -30HG/30PSI

  • [MATERIAL]: Housing Material: Stainless Steel.
  • [APPLICATION]: Brass wetted parts for measuring non corrosive liquid and gas pressure. It is widely used in heating pipe network, oil and gas transmission, water supply and gas supply system, vehicle maintenance shop, etc..
  • [HIGH PERFORMANCE]: Shock resistant,can be used in vibration places.
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock