Reviews Gas Heater Ignitor

Robertshaw 710-502 Low Profile mV Gas Valve

• Gas Valve Replacement: When you need to replace your B-67 gas valve, this compact, low-profile control designed for low capacity space heater applications fills the void where room is limited.
• Versatility: With an electrical rating range from 250 mV to 750 mV, this gas valve suits various gas types, including natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures.
• Features: RoHS-compliant 710-502 unit is equipped with three-position 1/2-inch outlets, 1/4-inch pilot outlet tubing, standard NEMA terminals, gas cock dial with off-pilot-on markings and an inlet filtered screen.
• Quality Warmth: Robertshaw makes reliable controls and replacement parts for furnaces, water heaters, burners and boilers, including thermostats, switches, ignitor and heat pump controls, gas valves, and more.
• Capability Sets Us Apart: Robertshaw is a global design, engineering and manufacturing company that sells product solutions and makes more than 10,000 sophisticated controls for commercial and home appliances.

Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400

• Gas Igniter for Stove Range, Replacement Part No. SGR403.
• SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
• Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
• ignitors are fragile and will break easily..
• Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
• Description:Use your wire cutters to cut the wires on the old ignito....

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

• Gas Igniter for Stove Range, Replacement Part No. SGR403.
• SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
• Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
• ignitors are fragile and will break easily..
• Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
• Description:Use your wire cutters to cut the wires on the old ignito....

(KAS) Viking Gas Range Oven Stove Cooktop Flat Ignitor Igniter PB040001

• Gas Range Oven Replacement Viking Ignitor AR04001.Replaces part # PB040001..
• Included with this ignitor is:1 Ignitor/2 Ceramic Wire Nuts/2 Wire Assemblies, with Female Insulated Terminals.
• This is a Flat Bar Syle Ignitor./The White Ceramic part of the ignitor measures 2-1/4" Long..
• The Ignitor part (the part that glows) measures 2" Long.The overall length from end of ceramic to end of the metal bracket is 4-1/2"..
• The 2 wires measure 12-1/2" Long from terminal end to ceramic..

MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces, Water Heaters, Boilers

• 120 volt nitride furnace igniter Replaces hot surface ignitor for gas-fired furnace, boiler, and water heater.
• How to tell if your igniter is working， if the igniter has continuity your multimeter should read anywhere from 9 to17 Ohms,if there is no reading on the multimeter or very little change, then there is no continuity and you will have to replace the nitride furnace igniter.
• 1.97" Nitride heating element, 1.18"Ceramic insulator body nonglazed 95% alumina- polished finish, 15-3/4 inch temperature rating 250℃ cable- 20 AWG/ UL 10362 specification.
• It works compatible with Cook Top, Cook Top and Range, Furnace and Warm Air Movement, Gas Ignition, Hot Surface Igniters, Infrared light source, Pool Heater and Boilers, Process Machinery, Special FX, Water, and Parking Heaters Nitride heating element.
• Power rating:150 W. Temperature at 120v ± 0.5v .60HZ at 17 sec ≧1180 ℃.This is a very versatile product, very robust with long cycle life. Silicon nitride is extremely rugged and can be handled without fear of breakage or contamination..

Frigidaire 5303935066 Igniter for Range

279311 Dryer Igniter, Replacement for Whirlpool, Kenmore, Maytag, Frigidaire, Jenn Air Crosley, Admiral.

• 279311 Gas Dryer Ignitor Kit. This ignitor kit includes the igniter, bracket, wire leads, and plugs. The gas ignitor lights the gas burner to heat the dryer during the cycle. This part works with the following brands: Whirlpool, Roper, Admiral, Maytag, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric & Ikea..
• 128910 20063800 20063801 239233 239302 26000279311 279185 338899 338900 3389895 340607 3415 343128 3-4970 41-311 5303281151 55438-1F 55438-IF 660991 685211 6-85211 686590 687399 691039 70-2CVT-6WOA 99912719 AH334180 AP3094138 B004XLDCM0 B0056I89N6 B00EKZCRG6 B00F4FEVME B00KPVH8MM B00Y1G1GAW B0196Z7WXW DE351 DE352 DE363 E6-V9NJ-YE1L EA334180 EAP334180 K3-JH9J-MY8M KS-XDEZ-G7SM N9-7V68-2G7K OJ-RXW5-5DDV PS334180 Q622141 SDE363 WRC23 WRC23K Z716.
• 304970 Maytag 279311 Kenmore 4391996 Kenmore 3-4970 Maytag 279311 Whirlpool 686590 Kenmore 686590 Whirlpool 239300 Kenmore 5303281151 Electrolux 239300 Whirlpool 5303937186 Electrolux 4391996 Whirlpool Z716 Lobright 41-311 Robertshaw SDE351 Supco 279311 ERP.

Vermont Castings 50000816 Ignitor Assembly

• This popular Vermont Castings Ignitor 50000816 is used on many BBQ grill models..
• Fits Vermont Castings gas grill models CF9050, CF9056, VCS3006, VCS3506, VCS4106, VCS5006BI, VM448, VM456, CF9055-3A, CF9055-3B, VC30, VCS3000,....
• Fits Jennair gas grill models JA460, JA461, JA461P Also fits the GP450 Great Outdoor Barbecue Grill..
• and more! Be sure this is the correct size and style for your BBQ Grill.

VI4 2 PAK Gas Oven Range Ignitor for PB040001 Viking

• Gas Range Oven Replacement Viking Ignitor AR04001..
• The White Ceramic part of the ignitor measures 2-1/4" Long..
• if you have any questions about the product and its models. contact us and we will help you.

(NEW Part) Gas Range Oven Ignitor for Viking Range replacement for PB040001 AR04001

• Set of Gas Range Oven Ignitor part number AR04001..
• with the purchase of quantity 1 of this listing you will receive quantity 1 ignitors..
• These are a replacement Viking Ignitor, part number PB040001..
• This is a Flat Ceramic Bar with a Round Style Ignitor..

FDW Outdoor Patio Heater Tall Standing Hammered Finish Garden Outdoor Heater Propane Standing LP 41,000BTU CSA Certified Gas Steel w/Accessories, Bronze

• Ⅰ 【EASY TO ASSEMBLY:】All parts of the patio heater present, unit well packed and undamaged. All the holes lined up well, and the bolts all fit well, the outdoor heater is easy assembly, follow the starting directions and you will finished it less than hour. gas patio heater is sturdy if put together properly and looks great.Patio Heater outdoor heaters gas patio heater lp patio heater.
• Ⅱ 【PUT LOTS OF HEATER:】The patio heater’s high output is 41000BTU, use it out on the patio at night in the late fall/winter time, the outdoor puts out a lot of heat, it’s a suggestion that start out with the gas patio heat on high but usually turn it down after the area heats up, a tank of propane lasts a couple of weeks.outdoor heaters gas patio heater lp patio heater Patio Heater.
• Ⅲ 【MULTIPLE PLACE USAGE:】The patio heater is perfect for the garden, you can use outdoor heater out on the patio at night, or in cold winter, you can see this kind of gas patio heater in the park, coffee table in the street, and you can also use the gas patio when you fishing, drinking with you friends or party.gas patio heater lp patio heater Patio Heater outdoor heaters.
• Ⅳ 【SAFTY:】 The patio heaters use 20 lbs LP Gas tank and which add weight to the Base of the ga....

MCAMPAS Igniter Ceramic Electrode Replacement Part .27.56-inch Ignitor Wire &Ceramic Spark Plug Ignition ​Electrode for Fire Pit Burner Gas Grill Burner ​2 Pack​

• ➦2 Pieces ：27.56 inch(700mm) Ignitor Wire with M10*1 Ceramic Electrode length 55mm,product high temperature 200°C.
• ➦Universal spark with M10*1 thread includes two nuts to fix on your fire pit pan plate.
• ➦Please note that the connection to the igniter is circular, suitable for pressing the igniter.
• The end of the terminal is in round with 2.3mm....
• ➦Igniter ceramic electrode universally fit for many fire pit table pan,also fit BBQ grill burner, gas stove, grill, heater.Please check and compare....
• ➦Made of high quality material ensure safe and long-lasting performance. There is a heat resistance coating over the wire to ensure safe use. will....

Heatilator Fireplace Ignitor Electronic Ignitor 26541 Fireplace OEM

• Electronic Ignitor/Electrode for HHT Units.