Reviews Gas Fittings Key

Stanbroil LP Propane Gas Fire Pit Stainless Steel Burner Ring Installation Kit, 12-inch

  • Ring Burner Material: Durable 304# Stainless Steel, Female 1/2 Inch Gas Inlet, 92,000 BTU Max.
  • Stylish Design: New cross-bar design for better gas distribution and great look for your fire pit.
  • Package Contents: Round 12-inch Burner with 1/2 inch female Inlet includes inlet plug and wrench.
  • Shut-off Valve Kit(Polished Chrome Flange & Key).
Check Stock

Stanbroil LP Propane Gas Fire Pit Burner Ring Installation Kit, Black Steel, 12-inch

  • Ring Burner Material: Heavy duty warp-resistant steel with high temperature black paint, Female 1/2 Inch Gas Inlet, 92,000 BTU Max.
  • Stylish Design: New cross-bar design for better gas distribution and great look for your fire pit.
  • Package Contents: Round 12-inch Burner with 1/2 inch female Inlet includes inlet plug and wrench.
  • Shut-off Valve Kit(Polished Chrome Flange & Key).
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

GASPRO 3/8-Inch Natural Gas Hose with Quick Connect Fittings Natural Gas Line for Grill Pizza Oven Patio Heater and More 12-Foot

  • [ Only For Natural Gas ] Used for connecting natural gas appliances..
  • [ Multi-Suitability ] Perfect for Weber natural gas grill, patio heater, pizza oven and more NG appliances..
  • [ Flexible Hose ] 12 feet 3/8-inch inside diameter hose with 3/8" male quick disconnect plug x 3/8" female flare..
  • [ Brass Fittings ] 3/8" quick connect/release fitting, make it easy to attach and remove this gas hose as needed..
  • [ Durable & Safe ] This natural gas grill hose features solid brass fittings and long lasting rubber hose to provide safety and no leakage..
Check Stock

MSA 10089321 Calibration Assembly for ALTAIR 4X Multi-Gas Detectors, Includes: Cap, Tube, and Connector, Ensure Detector Stays Calibrated for Maximum Accuracy

  • PEN Style Combustible Gas Leak Detector with Gooseneck.
  • 40ppm methane sensitivity and bearing defects.
  • Trace natural gas lines and fittings for leaks frame to failure.
  • Test propane tanks, fittings, lines, and heaters for leaks.
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • ...Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clean water after leak testing..
Check Stock

DOZYANT 24 Feet 1/2 ID Natural Gas Hose Propane Gas Grill Quick Connect/Disconnect Hose Assembly with 3/8 Female Flare by 1/2 Male Flare Adapter for Outdoor NG/Propane Appliance

  • 1/2" ID natural gas hose with 1/2" Quick Disconnect Plug Kit x 1/2" Female Flare Fittings. Use to convert outdoor appliance to natural gas supply....
  • Comes with 1/2" Male Flare to 3/8" Female Flare Brass fittings, to convert your 3/8" connector propane/natural gas grill.
  • Perfect for hooking up weber grill, fire pit, patio heater, pizza oven and portable generator.
  • 24-foot durable rubber hose, flexible enough to move your gas device as needed. Quick disconnect feature allow to swiftly disconnect hose.
  • Supplies up to 100K BTU/Hr, provide adequate gas flow for 30-in and larger grills.
Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

  • ...or gas tube,Compressor gas tube,Grill gas line.etc.
  • 【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
  • 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas leakage.Really convenient and 100% safety..
  • 【Installation】-High temperature resistance,Low pressure resistance,Explosion-proof and compressive material, it can be installed exposed to indoor light , or it can also be embedded in concrete, or behind the wall in dry wall systems as needed. also Suitable for burial installation,Underground Installation easier to handle Bends around corners,eliminating need for additional joints and fittings..
Check Stock

Stanbroil Fire Pit Gas Burner Spark Ignition Kit – Including Push Button Igniter Gas Shut-Off Valve with Key

  • Dimensions of the Face Plate: 7" L*3 13/16" H, Base Plate: 7" L*3 13/16" H.
  • Kit contains Chrome Ball Valve with 3” Chrome Key, Spark Ignitor with Leads &Ground Wire, Stainless Steel Mounting Plate.
  • Ball Valve: 1/2 Female NPT*1/2 Female NPT, we include Two 3/8" Male Flared x 1/2 NPT Fittings for Your Convenience.
  • Easy to install, Perfect for your DIY gas fire pit.
Check Stock

Gas Connector Kit 24 inch Yellow Coated Stainless Steel, 3/8” OD Flexible Gas Hose Connector for Gas Log and Space Heater, 1/2" FIP x 3/8" MIP Stainless Steel Fittings, 24” Gas Appliance Supply Line

  • REINFORCED HEAVY-DUTY QUALITY: Our gas supply connectors are quality tested and CSA certified, to serve you faithfully for years to come. Gas hose withstands 30 bends without leakage and 15 applications of 90 degree twists. Works in temperatures up to 800 degrees. Fittings create a leak-free seal within a torque of 1,040 inch-pounds..
  • EASY INSTALLMENT: No special tools required to install this gas connector. Includes stainless steel corrosion-resistant fittings with threaded end connections which easily connect to your gas supply line, and create a secure, leak-free seal..
  • ONE YEAR WARRANTY: We stand behind our products to ensure only the best quality materials and product performance. We offer a 1 year limited warranty on all Highcraft gas connectors so you can be protected in case of any misfunction..
Check Stock

36 Feet 1/2-Inch Natural Gas Hose with Quick Connect Fitting for BBQ, Grill, Pizza Oven, Patio Heater and More NG Appliance, Propane to Natural Gas Conversion Kit - CSA Certified

  • 【Good quality】Material upgrade - The propane hose is made of high-quality rubber, And connected with 100% solid brass connector, Has very good weather resistance, It is anti-cracking, anti-rust and very durable, Comply with CSA certification.
  • 【Widely used】Has a very broad applicability, Perfect for Weber, Charbroil Grill, and more NG appliances, The hose kit is used to connect your natural gas grill to the natural gas supply.
  • 【Easy to Install】Very easy to use and flexible, With quick-disconnect brass fittings on both ends, it is easy to attach and remove this gas hose as needed.
  • 【Greater capacity】36FT 1/2 inch ID Natural Gas Hose - with 1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings, Supplies up to 135,000 BTU P/HR, provide adequate gas flow for grills and other gas appliance.
  • 【Quality after-sales】1 Year quality guarantee, If you have any questions or needs during the use of our natural gas conversion kit, you can email me at any time and I will give you the best answer. You do not have to bear any losses.
Check Stock

Keg Kit with 5 Gallon Ball Lock Keg, 5 lb Aluminum CO2 Cylinder, Regulator, and All Accessories

  • ... long homebrew gas line can be cut into multiple sections to meet your mutiple kegging needs perfectly..
  • Can be Easily Cut by Cutting Tool: the short length brewing hose kit can not be cut and it can not be applied to your multiple keg dispensing process simultaneously, or the fixed hose fitting kit comes with extra fittings and you need to spend extra money, this 15 feet gas line can be cut into any length to meet your needs, you can can equip it with your own brewing dispensing parts, brings great convenience and creative possibilities for your multi-kegging brewing dispensing system..
  • Powerful No Leaking Pressure Transferring Tubing: the inside diameter of this great long kegging dispensing hose is 7mm, thick enough hose wall prevents the gas tubing kinks and maintains hose shape stability, smoothly transmit gas without leakage with the help of hose clamps. you can attach this kegerator hose to the beer barb fitting connector that has an outside diameter of 5/16'' to transfer your brewing gas to your beer keg..
  • Great Versatility and Widely Used: MRbrew 15 feet gas hose can withstand the co2 gas pressure value that can be up to 70 psi, you can attach this hose to ball lock quick disconnect fittings to transfer brewing gas co2 for carbonating beer, kom....
Check Stock

D.N. Industrial Grade Yellow Plumbers Teflon Tape, Gas Line Pipe Thread Tape, Twice Longer and Higher Density (1.3 g/cm3) Propane Yellow Tape Perfect for Gas Fittings (1/2\

  • Size and Quality: D.N. 1/2 inch yellow plumbers Teflon tape Thickness is: 0.004” (0.075mm), Temperature Resistance: -190°C to 370°C, Water pressure resistance:16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%.
  • High density: Yellow teflon tape density is 1.3 g/cm3 ( gram per cubic centimeter).
  • Material: Our plumber’s tape is made of PTFE material, which has high sealing and durability and gets CSA 20755, UL MH25811 approved.
  • Each roll of yellow Sealant Tape has a width of 1/2 inch which is suitable for for gas fittings. The length of this gas seal tape Model is twice longer as the same models.
  • plumbing tape has a sealing function to prevent the leakage, Yellow gas Sealant Tape Perfect for gas fittings.
Check Stock