Reviews Galvanized Steel Profile

20Sets Black 2020 Series Aluminum Profile Connector Set, 20pcs Corner Bracket, 40pcs T Nuts and Hex Screw Bolt for Slot 6mm 20S Aluminum Rail Accessories

  • 2020 Series Aluminum Profile Connector Set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects..
  • Package Content: 20pcs 20mm 90 Degree Solid Cast Aluminum Corner Bracket,40pcs Carbon Steel Galvanized M5 x 10mm T-slot Nuts, 40pcs Carbon steel M5x10mm Hex Socket Cap Screw Bolt, 1 piece wrench..
  • Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion..
  • Hex Socket Button Head Bolts Screws Nuts Surface chrome finish Anti-corrosion,rustless,non-pollution..
  • T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel Galvanized..
Check Stock

Roof Mount/Mounted Power Attic Ventilator (Black)

  • Heavy Duty : No brittle plastic, baking and chipping in the sun - our unit is rugged galvanized steel. 6-point suspensions (anchor points) for stability and wind resistance..
  • Max Air : 1080 CFM (1600 sq. ft attic) from precision balanced 14" fan blades for minimum vibration and no heat distortion..
  • Energy Efficient : 2.6 amp draw with a heavy duty PSC thermally protected motor, that's engineered to run cool for long life and dependable service..
  • Worry Free : Assembled in Texas with a 2-year limited warranty. We stand behind our products and stand behind our customer..
  • Modern Design : Our low profile dome has galvanized steel mesh grilles to protect against insects, birds, and rodents yet allow adequate air intake..
Check Stock

Powerful Industrial Exhaust and Ventilation Fan (14 Inch)

  • HIGH-CAPACITY FAN: Ventilation fan operates on a single, impact-resistant centrifugal blower wheel with 109 CFM, 0.9 Sones, and 120V for a powerful and effective performance.
  • HEAVY-DUTY: Housing is constructed of 20-gauge galvanized steel and features a 6" round metal duct connector to provide long-lasting use.
  • CUSTOMIZATION: Fan ducts horizontally, vertically, or in-line with a separate adapter for your convenience.
  • EFFECTIVE: Motors are permanently lubricated to provide continuous and quiet operation.
  • VERSATILE: Install fan in ceiling or wall -wherever it's needed most!.
  • 109 CFM 0.9 Sones (AMCA), 120V, 1.1 amps.
  • White Polymer Grille with 6-Inch round duct connector.
  • Low profile, white polymer or painted white enamel steel grille.
  • Single, impact-resistant centrifugal blower wheel.
  • 20 gauge galvanized steel housing and can be ducted horizontally or vertically - in-line ducting available with separate adapter.
Check Stock

PZRT 2020 Series Aluminum Profile Connector Set, 20pcs Corner Bracket,40pcs T-Slot Nuts, 40pcs M5x8 mm Hex Socket Cap Screw Bolt for 6mm Slot Aluminum Profile Accessories

  • 2020 Series Aluminum Profile Connector Set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • Cast Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion.
  • T-Slot Aluminum Extrusion M5x10 mm Hardware Slide In T-Nuts made from high quality carbon steel Galvanized,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • High Quality Carbon steel Hex Socket Button Head Bolts Screws Nuts Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.used widely in the home and office appliance, communication equipments, ship assembly and other machinery industry.
  • Package Content: 20pcs 20mm 90 Degree Solid Cast Aluminum Corner Bracket,40pcs Carbon Steel Galvanized M5 x 10mm T-slot Nuts, 40pcs Carbon steel M5x8 mm Hex Socket Cap Screw Bolt.
Check Stock

FAMCO Copper Hooded Wall Vent With Damper, Dryer Vent Outlet Used For Air Exhaust Applications

  • ...esigned to balance a low profile with optimum air and exhaust flow..
  • SELECtION: Our vent covers for home is available in sizes ranging from 3” to 14 inches. NOTE THE SIZE REFERS TO THE DIAMETER OF THE PIPE. Our low profile vent covers are also available in Aluminum, Galvanized Steel or Galvanized painted steel in black, brown, or white..
  • INSTALL: Our air vents are made from durable materials making it easier to install and compatible with most home improvement projects. Please note this dryer vent has NO SCREEN. Please see our SDWV Wall Vents for a vent with a screen and damper..
  • SATISFACTION: FAMCO prides itself on Quality Built Products manufactured from quality raw materials. All products are guaranteed to be free of defective material or workmanship for a period of one year from the date of delivery. During the guarantee period, if any parts prove defective, they will be replaced free of charge..
Check Stock

The Long, Long Hauler!

  • ...ted with E-Fittings so you can easily snap them in and out of the horizontal E Track Rails. The rubber blocks fit into the rain grooves of the tire for a secure fit. Great for low-profile vehicles..
  • STRONG AND DURABLE - Our E Track Rails are made from high-quality 12-gauge galvanized steel and the wheel straps carry a working load limit of 2,000 pounds each. This kit is a great system for your vehicle transportation needs!.
  • E TRACK KIT INCLUDES - (4) 5' Horizontal E Track Rails, (8) Plastic End Caps for Horizontal E Track, and (4) Wheel Straps with E-Fittings. NOTE: Hardware (screws/bolts) to fasten the E Track is not included..
  • SPECS - Utility Car Hauling Kit | E Track Rails Made of 12-gauge Galvanized Steel | Wheel Straps Working Load Limit: 2,000-pounds each | For safety, it's recommended to tie down all 4 tires when hauling a vehicle | Quantity: 1 Trailer E Track Kit.
Check Stock

NDS 1215 Square Catch Basin Drain Grate, 12 in, Galvanized Steel

  • Rust- and corrosion-resistant galvanized steel grate protects your drainage system by blocking leaves and debris before they can enter and clog your pipeline. Use with the 12 in. catch basin, riser, or low-profile adapter to drain heavy flows of excess stormwater from driveways, parking lots, and landscaped areas.
  • Fits 12 in. Catch Basin storm drain, 12 in. Riser, and 12 in. Low-Profile Adapter. 348 GPM flow rate. 113.8 sq. in. of open surface area. Rated for NDS Class C (H-20) loads (up to 325 psi) when properly installed—recommended for heavy-duty pneumatic tire forklifts and tractor-trailers at speeds less than 20 mph.
  • fits on 12 in. catch basins, risers, and low-profile adapters, and can be secured with screws. 12 in. Catch Basin Drain Grates are available in a variety of colors, materials, and styles.
  • Made to fit 12 in. square catch basins, risers, and low-profile adapters.
  • Comes with one 12 in. Square Catch Basin Drain Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
Check Stock

Rubbermaid Commercial Dual Action Mechanical Sweeper, Black, FG421388BLA

  • 2 types of bristle brush rolls to collect dust, dirt and debris.
  • Made of galvanized steel and ABS plastic.
  • Low-profile design provides easy access around and under furniture.
Check Stock

Bissell Natural Sweep Bagless Mechanical Sweeper Standard Multicolored

  • Low-profile design provides access around and under furniture.
  • Efficient 6-1/2" sweep path with bumper to protect furniture and walls.
  • Easy-open debris pan for effortless cleaning.
  • Constructed of durable galvanized steel and ABS plastic.
Check Stock

Frienda 20 Pcs Copper Nails for Killing Trees Stump Root 3.5 Inch Long Nail Spikes for Killing Tree Stump Removal Spikes with 2 Pcs 3.5 Inch Large Steel Nails and 1 Pcs Storage Box

  • 【Disc Dimension】 Stump Grinder Disc Arbor size : 5/8" (16mm)/Diameter: 4"/Suit For 4" (100mm) or 4-1/2" (115mm) Angle Grinder.Maximum speed (RPM)....
  • 【Unique Chromium Plating Reinforcement Chain】The improved patented tooth profile, the use of excellent materials, superb heat treatment, and hard....
  • 【Optimised Galvanized Steel Sheet】After simulation analysis, SchuhRia uses a 0.4inch(1cm) thick galvanized steel sheet to reduce weight while....
  • 【Disc and Chain Upgrade】 SchuhRia focas on technological innovation, continues to upgrade products, and develops all kinds fo chains to meet....
  • 【Attention and Warning】To avoid incorrect operation result in personal injury,please strictly follow the instructions.Install the angle grinder....
Check Stock

10pcs Black 2020 Series Corner Bracket Plate 5 Hole L Shape Joint Plates for Slot 6mm 20S Aluminum Rail Accessories (10PCS T Shape Without Screws and Nuts)

  • 【Type】Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile..
  • 【Type】Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile. 【Material】L Shape Joint Plates:6063 aluminum.
  • 【High Quality】T-Slot aluminum extrusion M5x8mm hardware slide in T-Nuts made from high quality carbon steel galvanized. Carbon steel hex socket button head bolts screws nuts surface chrome finish Anti-corrosion,rustless..
  • 【Widely Used】Compatible with all 20 series fasteners and accessories.
  • Suitable for 3D printer, CNC build, workbenches, lasers, brackets, furniture, fitness equipment, precision printers, automatic cutting machines, etc.
  • Applied in science, electronics, labs, home technology projects, displays/exhibitions, robotics, etc..
  • 【What You Get】10pcs L Shape Joint Plates.
  • 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..
Check Stock

Rubbermaid Commercial Galvinized Steel Carpet & Floor Sweeper Cordless Sweeper Hardwood Floor Cleaner Push Broom

  • Low-profile design provides access around and under furniture.
  • Efficient 6-1/2" sweep path with bumper to protect furniture and walls.
  • Easy-open debris pan for effortless cleaning.
  • Constructed of durable galvanized steel and ABS plastic.
Check Stock

1 x 1 1010 Series Aluminum Extrusion Profiles Frame Hinge Install Kit Connector Set 4pcs Zinc Alloy Hinge with T-Nuts Hex Screw Bolt for 1 Inch x 1 Inch Extrusion Profiles Rail

  • 1010 10 series aluminum profile T-slot connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC....
  • Package content: 4pcs 1 inch x 1 inches Aluminum Extrusion Profiles Frame Hinge, 16pcs galvanized T-slot nuts, 16pcs stainless steel hex socket cap....
  • Zinc alloy hinge used to connect pieces of 1" aluminum extrusion at a 90 degree angle suitable for most of 10 series aluminum profile extrusion.
  • Stainless steel hex socket button head bolts screws nuts surface chrome finish anti-corrosion, rustless, non-pollution.
  • Used to connect the connection between profiles and profiles or boards.
Check Stock