Reviews Galvanized Angle Iron

BSN Rigid Drag Mat 6-feet x 18-inch

  • Rugged all-steel drag mats have 1" x 1" mesh with 13 gauge galvanized connecting rods.
  • Mesh material is 3/8" x .050 galvanized steel.
  • Includes heavy-duty angle iron across front of mat and a rope with handle for pulling.
Check Stock

Baseball Infield Drag Mat

  • Rugged all-steel drag mats have 1" x 1" mesh with 13 gauge galvanized connecting rods.
  • Mesh material is 3/8" x .050 galvanized steel.
  • Includes heavy-duty angle iron across front of mat and a rope with handle for pulling.
Check Stock

Oakland Living Elite Chimenea

  • Hardened Powder Coat Finish in Antique Bronze for Years of Beauty.
  • Easy to Follow Assembly Instructions and Product Care Information.
  • Stainless Steel, galvanized or Brass Assembly Hardware.
  • Cast iron construction with bronze finish.
  • Includes stoking fork, rain cap, and log grate.
  • Embossed with crossing line, diamond pattern.
  • High off the ground to help prevent heat damage to decking, lawn, or patio.
  • 360 degree screened firebox allows fire to be enjoyed from any angle.
Check Stock

arena Square Cut Drag Short Training Swimsuit, Green - Black - Black, 30

  • Galvanized steel mesh construction effectively drags and grooms the dirt to create a smooth, even surface.
  • Maintains the dirt on the infield baseline, the pitcher's mound, the batter's box or the home plate area.
  • Suitable for use before and after games, as well as between innings.
  • Angle iron on the front of the mat provides smooth dragging performance.
  • Heavy-duty chain attaches to tractors and other outdoor power equipment for fast, simple use.
  • Mesh is 3/8" x .050 galvanized steel, Weight: 68 lbs..
Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

  • Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
  • Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
  • Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
  • Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check Stock

BSNSPORTS Heavy Duty Drag Mat - 6 6 W x 4 L

  • Galvanized steel mesh construction effectively drags and grooms the dirt to create a smooth, even surface.
  • Maintains the dirt on the infield baseline, the pitcher's mound, the batter's box or the home plate area.
  • Suitable for use before and after games, as well as between innings.
  • Angle iron on the front of the mat provides smooth dragging performance.
  • Heavy-duty chain attaches to tractors and other outdoor power equipment for fast, simple use.
Check Stock

Rustic Galvanized Vase Metal Flower Holder Vintage Watering Can Decor 4.5x8.5 in

  • Tin Watering Can: (For decoration only, do not add water) Achieve a charming, vintage feel with this rustic vase.
  • Galvanized Iron: This metal vase is made of premium galvanized iron.
  •  display artificial flowers and plants on tabletops, garden landscapes, or in your backyard.
  • What’s Included: You’ll receive 1 galvanized flower bucket can.
  • The Perfect Gift: The rustic watering can makes a thoughtful gift for garden lovers for holidays, birthdays, weddings, housewarming, and more.
  • Versatile Size: This galvanized pail measures 8.5 inches in height with handle.
Check Stock

Cutting Wheel 4-1/2 Inch 100 PCS Cut Off Wheel 4.5"x.047"x7/8" Cutting Disc Ultra Thin Metal & Stainless Steel,Cutting Wheel Fits Angle Grinder Saw Grinder Metal Cut Tools

  • FITS ANY ANGLE GRINDER ：Grinder blades is 4.5"x.047"x7/8" total in 100 PCS.Fit for 4-1/2”Angle Grinders and compatible with All 4-1/2”Angle Grinders..
  • MULTIPLE UESES : Grinding Wheel are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive cutting action.Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel.fast burr free cutting.
  • Package List:100Pcs 4 1/2 Inch Cut Off Wheel.
Check Stock

EZ Shed 70187 Peak Style Instant Framing Kit

  • EASY-TO-FOLLOW-PLANS INCLUDED. Materials lists, cut lists, and detailed instructions with step-by-step images creates a 7’W x 8’L Shed..
  • Construct with wood or composite 2×4’s. Add your own roofing and siding to match your home..
  • Galvanized Steel Base and Angle Brackets won’t rust or rot.
  • Includes 24 Steel Angles, 12 Steel Base Plates and plans for 3 sizes. (additional kits required for larger sizes).
  • Only straight, 90 degree cuts are required. No miters or complex measurements are needed. Galvanized angle brackets create the perfect angle every time..
Check Stock

12 Pcs 1-5/8 Inches Channel Angle Bracket Strut Metal Corner Brace Metal Brackets 45 Degree Bracket with 3 Holes Carbon Steel Corner Braces Small Hardware Brackets for Corner Mounting, 3/16 Inch Thick

  • Package Contains: you will receive 12 pieces 45 degree angle connector bracket in that package, which can connect 1-5/8 inches of channels.
  • The quantity is adequate for you to use and replace in daily life, meeting your various demands.
  • Size Information: our angle iron corner brackets measure 1-5/8 inches wide, 3/16 inches thick and 1/2 inches large in hole diameter size, and the tilt angle is 45 degrees or 135 degrees, are suitable for you to connect different things in this angle.
  • Reliable and Quality: made of carbon steel material, our 45 degree bracket is electron galvanized, rustproof and serviceable, thick and lightweight, not easy to deform or break, allowing you to use for a long time.
  • Easy to Use: this corner brace angle bracket is designed with 3 holes, so that you can put the mounting screws to fix it on the places, which can achieve a fixed effect, stable and effective, bringing you a lot of convenience.
  • Wide Range of Use: our angled mounting brackets are appropriate for you to use at office, home, shopping malls, apartments, gardens, schools and so on, providing people to assemble easily and quickly, and make things more firm and safe.
Check Stock

EZ Shed 70188 Barn Style Instant Framing Kit

  • Only straight, 90 Degree cuts are required. No miters or complex measurements are needed. Galvanized angle brackets create the perfect angle every time..
  • Galvanized Steel base and angle brackets won’t rust or rot. Use with wood or composite 2×4’s. Add your own roofing and siding to match your home..
  • Easy-to-follow-plans included. Materials lists, cut lists, and detailed instructions with step-by-step images so that even beginning d-i-years can build a great looking shed, like the professionals..
  • Includes 40 Steel angles, 12 Steel base plates and plans for 3 Sizes. (Additional kits required for larger sizes).
  • This 7-ft. X 8-ft. Shed kit is cost effective and can save up to fifty percent over other pre-built and knocked-down storage sheds and garages. You supply the labor for this easy weekend project..
Check Stock

Deco 79 Metal Decorative Jars with Lids Set of 3 12 9 8 H Gray

  • FARMHOUSE THEME: Enhance your farmhouse inspired home with classic style and a touch of cozy appeal.
  • MADE WITH METAL: These farmhouse style canisters are made from galvanized iron materials.
  • GRAY METAL FINISH: Dimensional, silver galvanized metal jars with round, ringed lids with round metal handles.
  • FEATURES IRREGULAR DECORATIVE JARS: This farmhouse style inspired design gray galvanized iron canister set features a distressed external design with galvanizing pattern stains furnished with a low round lid with a spherical handle.
  • 3 PIECES SMALL SIZE: This set of 3 kitchen canisters measure 7”L x 7”W x 11”H, 6”L x 6”W x 9”H, 5”L x 5”W x 7”H.
Check Stock

Hard-to-Find Fastener 014973237950 Cold Forged Wing Nuts, 7/16-14, Piece-10

  • Easy to install and disassemble, reusable.
  • Just tighten the nut by hand without any other tools.
  • Application: mechanical equipment, electronic equipment, communication equipment, hardware lighting, building bridges, furniture decoration, etc..
Check Stock