Reviews Furring Steel Channel

Highwild Paper Shooting Targets Silhouette Cardboard Targets for Shooting Torso Paper Targets - ISPC/USPSA/IDPA 50 Pack - 13 X 16

  • Adjustable width for law enforcement style or IDPA / IPSC targets (18"-23").
  • Spring loaded tubes and thumb screws secure 1x2 wood furring strips in both directions.
  • The 1/4" thick x 12" long steel ground stake can be pushed or hammered into almost any terrain.
  • Designed for high wind areas and adverse weather conditions.
  • Spring loaded tubes and thumb screws secure 1x2 wood furring strips.
Check Stock

Freeman PCTN64 Pneumatic 14-Gauge 2-1/2" Heavy Duty Concrete T Nailer

  • Construction Applications: Designed for wood to concrete / steel projects, such as furring strips, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, and subflooring.
  • Compatible Nails: 14 gauge glue collated concrete T-nails from 5/8" – 2-1/2".
  • Built to Last: One piece hardened steel drive blade, and anodized aluminum magazine and cylinder result in a durable pneumatic tool resistant to damage.
  • Fire Lock: Prevents accidental firing for safety when not being used.
  • Ergonomic Body: Rugged but also lightweight and comfortable for extended use.
Check Stock

DEWALT DDF212035P Semi-Automatic Powder Actuated Trigger Tool

  • Semi-automatic tool for general construction and remodeling jobs.
  • Ideal for attaching 2 by 4's, furring strips, and electrical boxes to concrete and steel.
  • Padded handle absorbs recoil, .27 caliber.
  • Fastens up to 3-inch drive pins with washer.
Check Stock

Max HN120 PowerLite Concrete Nailer

  • ✅ Shoots 14 gauge T-nails from 5/8'' to 2-1/2'' long | Hardened driver | Convenient side-load magazine | Rubber hand grip for added comfort | Heavy-duty light weight aluminum body | Adjustable exhaust.
  • ✅ Soft grip handle reduces fatigue | Touch-strike security system is safe for the operator | Available with either sequential and contact fire trigger | Quick-release nosepiece for fast clearing of jams | Rubber can protect the surface of the gun when the gun fall.
  • ✅ Magazine Capacity: 100 | Operating Pressure: 80-100 PSI | Air Inlet: 1/4" | Fastener Size: 14 Gauges - 0.087" Diameter | Fastener Type: T-Nails (both hardened & galvanized) | Fastener Length: 5/8" - 2-1/2" Long Nails.
  • ✅ Includes: Concrete T-Nailer | Cardboard box.
  • ✅ Wood to concrete & masonry furring | Plywood to concrete nailing | Light gauge steel drywall track to concrete | Wire lath to masonry | Steel banding to wood | Wood to light gauge steel (up to 3/16") | Decking | Fencing | Sub flooring | General construction.
Check Stock

I'm Afraid of Americans

  • SUSTAINABLE AND HANDCRAFTED IN THE USA: Each package includes 5 large, beautiful nail-up metal ceiling tiles made from 25% recycled T1-grade tin-plated steel.
  • EASY TO INSTALL: Panels contains a 1/4” nail rail that overlaps with other tiles to form a tight and nearly invisible seam.
  • PERFECT SIZE FOR ALL PROJECTS: Each tile measures 24 inches x 24 inches are are .01 inches thin. Perfect for kitchens, bars, restaurants, ceilings and much more! Covers 20 SQ FT.
  • DECORATIVE AND FUNCTIONAL: Pattern #3 From American Tin Ceilings Features a Small Repeating Floral Arching Diamonds Pattern.
  • IMPORTANT INSTALLATION DETAILS: Tiles are FINISHED and do not require an additional polyurethane clear coat. Ceiling installation requires a wood substrate such as plywood, furring strips, or joists. Backsplash installation requires adhesive..
Check Stock

I'm Afraid of Americans (Nine Inch Nails V1 Mix) [Explicit]

  • SUSTAINABLE AND HANDCRAFTED IN THE USA: Each package includes 5 large, beautiful nail-up metal ceiling tiles made from 25% recycled T1-grade tin-plated steel.
  • EASY TO INSTALL: Panels contains a 1/4” nail rail that overlaps with other tiles to form a tight and nearly invisible seam.
  • PERFECT SIZE FOR ALL PROJECTS: Each tile measures 24 inches x 24 inches are are .01 inches thin. Perfect for kitchens, bars, restaurants, ceilings and much more! Covers 20 SQ FT.
  • DECORATIVE AND FUNCTIONAL: Pattern #3 From American Tin Ceilings Features a Small Repeating Floral Arching Diamonds Pattern.
  • IMPORTANT INSTALLATION DETAILS: Tiles are FINISHED and do not require an additional polyurethane clear coat. Ceiling installation requires a wood substrate such as plywood, furring strips, or joists. Backsplash installation requires adhesive..
Check Stock

Fasteners Plus 3/16\ x 1-3/4\ Star Drive T-25 Flat Head Blue Concrete Screws (Box of 100) to Anchor Masonry, Brick & Block

  • [DIMENSIONS] Thread Diameter: 3/16" | Length: 1-3/4" | Quantity: 100 Pieces | Material: Blue Ruspert coated Carbon Steel Star Drive T-25 Flat Head.
  • [BIT INCLUDED] Appropriate size drill bit for accurate installation.
  • [CORROSION RESISTANT] Blue Ruspert coated and approved for ACQ lumber.
  • [APPLICATION] Conquest concrete screws are perfect choice for hanging cabinets, attaching furring strips and hanging a variety of fixtures to concrete, brick, block, and other masonry materials.
  • [DESIGN] Hi-Low twin thread design provides easier driving and increases installation speed. Diamond tip for superior penetration into hard materials.
Check Stock

Concrete Nail Gun, Silencer Shot Nail Grab, Steel Nails Gun, Portable Nail Gun Set, Concrete Nailer With Case, Manual Fastening Tool for Cement Wall

  • ✅ Shoots 14 gauge T-nails from 5/8'' to 2-1/2'' long | Hardened driver | Convenient side-load magazine | Rubber hand grip for added comfort | Heavy-duty light weight aluminum body | Adjustable exhaust.
  • ✅ Soft grip handle reduces fatigue | Touch-strike security system is safe for the operator | Available with either sequential and contact fire trigger | Quick-release nosepiece for fast clearing of jams | Rubber can protect the surface of the gun when the gun fall.
  • ✅ Magazine Capacity: 100 | Operating Pressure: 80-100 PSI | Air Inlet: 1/4" | Fastener Size: 14 Gauges - 0.087" Diameter | Fastener Type: T-Nails (both hardened & galvanized) | Fastener Length: 5/8" - 2-1/2" Long Nails.
  • ✅ Includes: Concrete T-Nailer | Cardboard box.
  • ✅ Wood to concrete & masonry furring | Plywood to concrete nailing | Light gauge steel drywall track to concrete | Wire lath to masonry | Steel banding to wood | Wood to light gauge steel (up to 3/16") | Decking | Fencing | Sub flooring | General construction.
Check Stock

Fasteners Plus 1/4 x 3-1/4 Star Drive T-30 Flat Head Type 410 Stainless Steel Concrete Screws Box of 100 to Anchor Masonry Brick & Block

  • [DIMENSIONS] Thread Diameter: 1/4" | Length: 3-1/4" | Quantity: 100 Pieces | Material: Silver Ruspert coated Carbon Steel Star Drive T-30 Flat Head.
  • [BIT INCLUDED] Appropriate size drill bit for installation.
  • [CORROSION RESISTANT] Silver Ruspert coated and approved for ACQ lumber.
  • [APPLICATION] Conquest concrete screws are perfect choice for hanging cabinets, attaching furring strips and hanging a variety of fixtures to concrete, brick, block, and other masonry materials.
  • [DESIGN] Hi-Low twin thread design provides easier driving and increases installation speed. Diamond tip for superior penetration into hard materials.
Check Stock

Fasteners Plus 1/4 x 1-1/4 Star Drive T-30 Flat Head Type 410 Stainless Steel Concrete Screws Box of 100 to Anchor Masonry Brick & Block

  • [DIMENSIONS] Thread Diameter: 1/4" | Length: 1-1/4" | Quantity: 100 Pieces | Material: Silver Ruspert coated Carbon Steel Star Drive T-30 Flat Head.
  • [BIT INCLUDED] Appropriate size drill bit for installation.
  • [CORROSION RESISTANT] Silver Ruspert coated and approved for ACQ lumber.
  • [APPLICATION] Conquest concrete screws are perfect choice for hanging cabinets, attaching furring strips and hanging a variety of fixtures to concrete, brick, block, and other masonry materials.
  • [DESIGN] Hi-Low twin thread design provides easier driving and increases installation speed. Diamond tip for superior penetration into hard materials.
Check Stock

EMILYPRO Aluminum Polishing Wheel for Drill Chrome Rim Manifold Polishing Kit 3\ x 1/4\ Hex Shank Cone/Mushroom/Column - 3pcs

  • 【Application】The aluminum polishing wheels be used for polishing recessed areas / tight space or gap / irregular surfaces such as mag wheels, motorcycle wheels, car rim, manifolds etc..
  • 【Special Design】The chrome polishing kit are designed as Cone/ Mushroom/ Column shape, great for reach and achieve different space/areas polishing purpose..
  • 【Good Quality】The rim polishing balls are made with fine cotton cloth with furring surface treated, mounted with hex shank with notch cut to make sure not slip off from drill..
  • 【Widely Use】The drill buffing ball are suitable for polishing car rim, wood, plastics, acrylic, ceramics, glass, metals (stainless steel, aluminum, chrome) etc..
  • Column: 2-1/2”. Shank dia: 1/4". Material: Cotton. Package: 3pcs..
Check Stock

Dewalt 20V Max* Cordless Concrete Nailer Kit

  • ... from your face. The nails reload visual window shows the remained nails to remind the operator to reload.
  • 【Longer Fasteners Acceptable & Wide Applications】 14GA concrete T nails from 1 Inch to 2-1/2 Inch length. Great Tool for truss building, construction framing, furring strips and decking. **For the OLD or HIGH-STRENGTH concrete floor, we suggest using concrete and steel nailer which is more suitable & powerful to penetrate surface flush. **.
Check Stock

CTK PRECISION P3 Ultimate Target Stand

  • Accommodates paper and cardboard targets of virtually any size..
  • Innovative clamping plates provide a firm grip and hold on the furring strips (not provided)..
  • The angled legs provide a stable 4 point stance allowing the stand to be set up on uneven terrain..
  • Sets up and breaks down in seconds. No tools required!.
Check Stock