Reviews Full Tower Case For Watercooling

PrimoChill EximoSX 360mm (40mm) Ultra PC Water Cooling Radiator, 120mm x 3, Triple Fan (R-EXI4036) Available in 20+ Colors, Powdercoated in USA and Custom Watercooling Loop Ready - Sky White

  • PrimoChill Premium Slim PC Water Cooling Radiator available in 20+ colors for the perfect custom look in watercooling the 30mm thickness is perfect for any system install, large or small.
  • Powdercoated in the USA by our team to bring you the best possible finish in the most colors available in any customer watercooling radiator on the market today.
  • Premium high performance slim water cooling radiator with high density tube/fin ratio for extreme heat dissipation as well as 7x dual pass coolant tubes optimized fin layout for low RPM fans.
  • Radiator includes all mounting hardware for and logo badge to be applied once radiator is install so the logo is in the correcty position. Once again PrimoChill going the extra mile to make your custom watercooling loop perfect.
  • Radiator Specifications: Dimensions 395 x 120 x 40mm (L x W x H), 2 G 1/4 Ports (1 in 1 out), ALL COPPER constructed fins and coolant tubes for maximum coolant per square inch.
Check Stock

Bykski GPU Liquid Cooler Copper Waterblock G1/4 Full Cover PC Water Cooling Watercooling Block for Graphics Card Gigabyte RTX 2080 RTX 2070 RTX 2060 Super Gaming Super windforce 5V 3PIN RGB

  • This GPU water block is not an universal waterblock. It works with graphics cardsGIGABYTE GeForce RTX 2080 Super WindForce OC 8G rev1.0, GIGABYTE RTX 2070 Gaming OC 8G, GIGABYTE GeForce RTX 2070 Super Gaming OC WHITE 8G, GIGABYTE GeForce RTX 2080 Super TURBO 8G, GIGABYTE GeForce RTX 2070 SUPER WINDFORCE OC 8G, GIGABYTE GeForce RTX 2060 SUPER GAMING OC WHITE 8G, GIGABYTE GeForce RTX 2080 SUPER GAMING OC 8G, GIGABYTE GeForce RTX 2060 SUPER GAMING OC 8G, GIGABYTE GeForce RTX 2070 GAMING OC 8G,.
  • GIGABYTE GeForce RTX 2070 WINDFORCE OC 8G, GIGABYTE GeForce RTX 2080 WINDFORCE OC 8G and GIGABYTE GeForce RTX 2080 GAMING OC 8G. The GPU watercooling block is full-cover version, cooling GPU, MOS and RAM..
  • AURA effect 5V 3pin RGB LED lights color changeable assembled GPU watercooling block, the remote control is included..
  • 2pcs nickel plated brass compression fittings for 14mm OD rigid or hard tubings are included..
  • High Performance Copper Base. 5v 3-pin connector. Astonishing VGA GPU liquid cooling block for PC game players..
Check Stock

GIM ATX Mid-Tower Case White Gaming PC Case 2 Tempered Glass Panels & Front Panel RGB Strip Gaming Computer Case Desktop Case USB 3.0 I/O Port, Magnet Dust Filter, Water-Cooling Ready

  • 【Powerful Cooling System】Mid-Tower Computer Case has enough space for 10pcs 120mm GIM ARGB fans to provide lighting and excellent air performance at the same time, keep cooling. And GIM PC Case supports,ATX, Micro-ATX and Mini-ITX motherboards..
  • 【More Space】GIM Mid-Tower Chassis has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard.
  • 10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm..
  • 【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where would help you clean up the interior and improve air performance. Mid tower gaming PC Case is equipped with 2pcs dust filter , and the top magnetic strip dust filter protects the case..
  • 【TOP I/O PANEL】GIM mid-tower ATX PC case designed with 1 x USB 3.0 Port, 2 x USB 2.0 Port, 1 x HD Audio, LED Button, Power, Reset. Our USB cable is shielded wire so that you can transmit data without interference..
  • 【No Risk to Purchase】: Any quality issue with your case, please feel free to contact us and let us....
Check Stock

GIM ATX Mid-Tower Case Black Gaming PC Case 2 Tempered Glass Panels & Front Panel RGB Strip Gaming Computer Case Desktop Case USB 3.0 I/O Port, Magnet Dust Filter, Water-Cooling Ready (Black)

  • 【Powerful Cooling System】Mid-Tower Computer Case has enough space for 10pcs 120mm GIM ARGB fans to provide lighting and excellent air performance at the same time, keep cooling. And GIM PC Case supports,ATX, Micro-ATX and Mini-ITX motherboards..
  • 【More Space】GIM Mid-Tower Chassis has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard.
  • 10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm..
  • 【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where would help you clean up the interior and improve cooling performance. Mid tower gaming PC Case is equipped with 1pcs dust filter, and the top magnetic strip dust filter protects the case..
  • 【TOP I/O PANEL】GIM mid-tower ATX PC case designed with 1 x USB 3.0 Port, 2 x USB 2.0 Port, 1 x HD Audio, LED Button, Power, Reset. Our USB cable is shielded wire so that y....
Check Stock

PrimoChill Vue Pre-Mix (32oz) - PrimoChill Blue SX

  • Released in 2017, Vue has withstood the test of time and is still a favorite SHOW COOLANT in the watercooling community with its unique visual traits, Vue is sure to bring another dimension to any loop..
  • Vue's exclusive water-based formulation allows it to stay suspended longer allowing longevity..
  • Safe to use with all rubber gaskets, acrylic tubing, pvc tubing, petg tubing, glass tubing, as well as nickel and copper components..
  • Biodegradable, Pre-Dyed and handmade in small batches for unmatched quality control right here in Boise, ID USA.
  • Vue's visual indicator is useful to illustrate fluids flow patterns in your watercooling loop or product design..
Check Stock

Seloom Computer Tower Stand, Adjustable Mobile CPU Stand, Heavy-Duty PC Tower Stand with Rolling Caster Wheels, Steel Desktop Stand, PC Riser Fits Most PC Gaming Desk Accessories

  • 【 】The computer tower stand is designed to support and protect the gaming pc case full tower for ease of use. The PC stand also provides additional surface clearance for better ventilation and cooling of the chassis with the power supply installed at the bottom.Protect your computer from wear and tear with a PC stand. The adjustable size fits most heavy-duty computer tower on the market..
  • 【 】The PC computer stand can be moved in all directions to be placed where you want, allowing you to use it freely at home and in the office. And it is suggested that the two lockable casters be mounted on the same side of the front. When you need it, it can easily go under your computer desk or printer stand and stay in place. PC accessories gaming,computer stand for desktop tower.
  • 【 】It gives you very easy access to the back of the PC tower when needed. Make it easier to move the computer tower when you want to plug the cable or do other works. Perfect for any surface even on floor carpet. If you needed something that could raise your gaming accessories for pc setup to keep it away from the floor or rug and to be able to easily move it, this is it!.
Check Stock

MATX Case Aluminum Mid Tower PC case Supporting ATX PSU Desktop DIY Computer Case for Gaming Home and Office use…

  • Mid Tower MATX PC Case C1: Large size 12.33*6.5*16.86 inch and 22L capacity, can be compared with Full Tower computer case.
  • Compatible with ATX PSU: Support ATX/SFX power supply, mATX/dtx/itx motherboard, 2*2.5''HDD+ 2*3.5''HDD, 6 fans max for air and liquid cooling.
  • Unique Bottom I/O interface Design: To keep the desktop clean and tidy, the I/O and wire ports set on the bottom, which is rare among the matx....
  • Special Space Dark Grey Color with one side tempered glass transparent design: ZZEW's special full aluminum alloy is oxidized into space gray color,....
  • Hign efficient heat dissipation: The four side mesh hollow out design makes the heat dissipation effect of micro ATX C1, beautiful and efficiently at....
Check Stock

Tento Lighting 12V RGB LED Strip Lights PC with Remote Controller, SATA Connector, 4-pin Port Connector, Motherboard Computer Case Lighting Multi-Color Dimmable Lighting

  • PC LED STRIP/COMPUTER CASE LED STRIP - Customize your desktop with PC LED strip, 20 static colors and 19 built-in dynamic light modes, even fade color, flashing, color breath and etc..
  • PLUG AND PLAY - Full kit computer rgb LED strip light comes with both SATA connector and 4 pin port connector for different purposes and PC cases..
  • RGB PC STRIP LIGHTING - Customize your desktop computer tower / PC case lights with 4 dynamic light modes and 16 static light colours to cheer you up and illuminate your hardware..
  • STRONG ATTACHMENT - Different from the 3M adhesive on the back of the control box, the RGB PC light strip is firmly attached to the PC case via a magnet inside, suitable for iron surface only..
  • MADE BY GAMERS FOR COMPUTER FANATICS AND DIY GAMERS - Fit to decorate your tower or gaming PC LED case, such as NZXT, ThermalTake, and Corsair case. Customize your workspace with vibrant LEDs to set the mood and illuminate your hardware..
Check Stock

Tree of Hearts Note Cards (Stationery, Boxed Cards)

  • Premium quiet fan, 120x120x25mm, 12V, 4-pin PWM, max. 2000 RPM, max. 22.6 dB(A), >150,000 h MTTF.
  • Next-gen A-series design combines high airflow and high static pressure performance, ideal both as a case fan and for CPU coolers, watercooling radiators and AIO liquid cooling systems.
  • State-of-the-art engineering (AAO frame, Flow Acceleration Channels, record tight 0.5mm tip clearance) and construction (Sterrox LCP material, metal-reinforced hub, metal bearing shell, etc.).
  • 4-pin PWM version for automatic speed control via 4-pin PWM motherboard fan headers, 450-2000rpm speed range (near silent at idle, powerful under load).
  • chromax.black.swap edition with swappable red, black, white, blue, yellow, grey and green anti-vibration pads for colour-customising (4 pads of each colour plus black anti-vibration gasket).
Check Stock

HumanCentric Adjustable Under Desk PC Mount and CPU Holder Wall Mount, PC Mount Under Desk Computer Mount That Fits Most PC or Computer Cases, PC Holder Under Desk Tower Mount, PC Under Desk Mount

  • Under desk computer mount: Mount your computer case under your desk or on the wall. Get your PC tower off the floor and out of sight for a decluttered workspace. The under desk PC mount is adjustable and fits most computer towers..
  • Adjustable PC under desk mount: The computer tower stand under desk holds cases up to 22 pounds. The PC case mount fits computers with a height between 12 - 21 inches and a width between 3.5 - 7.75 inches. Measure your device before purchase..
  • Seamless rotation: The PC desk mount rotates with ease a full 360 degrees. The computer desk mount swivel tower allows instant access to your PC’s cables, ports, and plugs. Free up work space with a computer holder under desk..
  • CPU holder with scratch free design: Includes felt padding dots to prevent any scratches on your computer case for your underdesk computer mount or desktop computer wall mount..
  • Easy installation: The under desk CPU mount comes with all the necessary hardware for both under desk and wall mounting. It includes a simple step by step instruction manual for your under desk CPU mount..
Check Stock

Mcbazel Tuact Silicone Gel Anti-slip Stick for Venom-X4 Mouse Wand Controller

  • Premium quiet fan, 120x120x25mm, 12V, 4-pin PWM, max. 2000 RPM, max. 22.6 dB(A), >150,000 h MTTF.
  • Next-gen A-series design combines high airflow and high static pressure performance, ideal both as a case fan and for CPU coolers, watercooling....
  • State-of-the-art engineering (AAO frame, Flow Acceleration Channels, record tight 0.5mm tip clearance) and construction (Sterrox LCP material,....
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, 2000rpm maximum speed (1700rpm with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, radiator gasket, fan screws, extension cable and y-cable for running two PWM fans on the same header.
Check Stock

Espresso Parts Yama Cold Brew Coffee Maker with Ice Slow Drip Technology I Coldbrew Tower Machine, Large Capacity 25 Cups (100oz), Black Wood Frame

  • FASTER BREW TIME: Get rich, acid-free, full-bodied cold brew in just 3-4 hours with the Yama Cold Brew Coffee Maker Tower. By comparison, normal immersion style cold brew takes 16-24 hours to brew.
  • BETTER TASTE: Our cold drip coffee maker tower employs an ice-water reservoir and a slow-drip system to create a perfectly timed cold brew. The result is a brighter full profile taste that coffee connoisseurs prefer over the normal immersion brew.
  • POPULAR WITH PROFESSIONALS: Great cafes around the world use the Yama cold brew coffee tower because it is simply the best cold brew system on the market.
  • HAND-MADE BOROSILICATE GLASS: Compared to normal (soda-lime) glass, borosilicate is much harder and stronger, and stands up better to acidic drinks. Borosilicate is environmentally friendly, BPA-free and widely used in high-end cookware..
  • SATISFACTION GUARANTEED: We’re certain you'll love your gorgeou new Cold Brew Tower! But in case something goes wrong and you're not 100percent happy simply send us a message and we’ll make it right. Easy as that.
Check Stock

Noctua NF-A12x25 PWM, Premium Quiet Fan, 4-Pin (120mm, Brown)

  • Premium quiet fan, 120x120x25mm, 12V, 4-pin PWM, max. 2000 RPM, max. 22.6 dB(A), >150,000 h MTTF.
  • Next-gen A-series design combines high airflow and high static pressure performance, ideal both as a case fan and for CPU coolers, watercooling radiators and AIO liquid cooling systems.
  • State-of-the-art engineering (AAO frame, Flow Acceleration Channels, record tight 0.5mm tip clearance) and construction (Sterrox LCP material, metal-reinforced hub, metal bearing shell, etc.).
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, 2000rpm maximum speed (1700rpm with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, radiator gasket, fan screws, extension cable and y-cable for running two PWM fans on the same header.
Check Stock