Reviews Fuel Transfer Fittings

CarBole Micro Electric Gasoline Fuel Pump Universal 5/16 inch Inlet and Outlet 12V 1-2A 35GPH 4-7 P.S.I.

• Application: Universal for carbureted applications on most 4, 6 and 8 cylinder vehicles ..
• Operating fuel pressure: 4-7 P.S.I.(Gasoline).
• Package: Fittings*1 and mounting hardware *2 ..
• Eliminates vapor lock and flooding, works well as a fuel transfer pump or booster pump ..
• Quite Operation. CarBole’s every single pump is 100 percent tested throughout the entire manufacturing process for worry free, out-of-the-box performance ..

15 FEET GradeT - 1/4 OxyFuel Welding & Cutting Twin Hose with BB Fittings - SÃœA

• Grade "T" Twin Wedling Hose for iots use with Propane, Alternative Fuel Gases and Acetylene.
• Diameter: 1/4" Fittings: Type: B - B Size: 9/16"-18 LH for Fuel gas & Type: B - B Size: 9/16"-18 RH for Oxygen.
• Grade "T" twin welding hose is specially designed to resist the effects of the oils in propane. It is also more weather-resistant..
• Grade "T" Twin Fuel Gas Welding Hose is designed for transfer of many commonly used welding fuel gases and oxygen in applications to 200°F and 200 psi..

MSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion

• 1Pc 6AN 25 feet of high-pressure fuel injection hose.
• 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
• 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
• 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.

Mr. Gasket - 9710 Fuel Press Regultr W/Hdwr, Chrome

• Fits 5/16 inch and 3/8 inch inside diameter fuel line.
• Not for fuel injected systems, Max inlet pressure 9 PSI.
• Adjusts fuel pressure from 1 to 6 pounds.

Lisle 37140 Disconnect Pliers, 45 Degree

• The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP Line Fittings and DEF Fittings in Hard-to-Reach Areas.
• Low-profile design with 45° bend allows the tool to fit between the top of the fuel tank and vehicle.

Fuel Transfer Hose, Fuel Hose 3/4\ x 20' (6 m), 3/4 Fuel Hose 20 ft, Fuel Pump Hose 3/4 Inch, for Dispensing Diesel Fuel, Gasoline, Grease, Kerosene, Petroleum Oils - 3/4 Transfer Hose,Farm Fuel Hose

• 3/4" x 20' (6 m) Fuel Transfer Hose, 3/4 Fuel Hose, Fuel Transfer Pump Replacement Hose. Designed for use with all electric fuel transfer pumps..
• Farm fuel transfer hose For Dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils..
• One end of thread is 3/4 In. NPT, the other end is 1-inch NPT. Length 20 ft..
• This Fuel Transfer Hose 3/4 inch may also know as fuel transfer hose 1 inch,1 inch fuel hose 20 feet, Fuel pump hose,Farm Tank Fuel hose,3/4 Fuel Hose 20 ft,Fuel transfer hose,3 4 Fuel hose,Fuel transfer pump hose,Gas pump hose,Gas transfer hose,Transfer tank hose,Diesel tank hose,Pump hoses,Gasoline pump hose,Farm fuel hose,Diesel transfer hose,Fuel hoses,Diesel fuel line hose,Fuel fill hose,Fill hoses,Oil transfer hose,3/4 Fuel hose,Fuel hose 3/4, 3/4 Fuel transfer hose, 3/4 Hose..

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

• 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
• Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
• Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
• The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
• Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
• No Worry To Buy: Excellently Sealed, no leaking. We of....

Loctite 518 50ml Red Gasket Eliminator Tube

• A viscous paste sealant designed for use on threaded fittings, flanges, and gasket applications.
• Improves reliability, extends gasket life, and stops leakage.
• Ideal for applications involving heat transfer fluids, natural gas, water, sour service fuel gas, motor oil, gasoline, steam, ethylene glycol, various hydrocarbon gases, and other chemical processes.

Mr. Gasket 12S Micro Electric Fuel Pump

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

• ...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
• Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
• FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
• Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
• Recommended for older low-pressure systems with mechanical fuel pumps.
• Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
• EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
• PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
• Comes with flex hoses, fittings, and instructions for quick reference.
• Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.

Innova 3640 Professional Fuel Injection Pressure Tester

• Helps identify and diagnose low fuel pressure a faulty fuel pressure regulator leaking injector(s) fuel leaks and/or clogged fuel filters.
• Properly rated fuel hose and brass fittings make this tool a step above the rest in quality and longevity.
• Large easy-to-read 2" dial face with 0-100 PSI scale.
• Durable 16" gauge hose and 6-foot bleed-off hose with solid brass fittings.
• Includes Ford GM and Chrysler test adapters and a "Tee" adapter for import vehicles.

Attwood 8838TM6 Universal Sprayless Connector, Prevents Fuel Spray from Fuel Line, Tank Male, ¼-Inch NPT with Thread Sealant

• Replaces traditional tank fittings and eliminates spray when connecting or disconnecting fuel fittings.
• High strength body engineered to withstand the harsh marine environment.
• Male fitting fits all standard 1/4" NPT fittings.
• Pre-applied fuel-grade thread sealant prevents fuel leaks.

LSx Fuel Filter / Regulator, 58 PSI, Includes AN 6 Fittings for LS Swap, EFI Conversion

• This AN6 fuel filter and regulator adds reliability and reduces cost with -6 AN inlet, outlet, and return fittings built into the assembly.
• Designed specifically for LS swaps or EFI conversions that require a reliable and professional fuel system solution.
• 58 PSI fuel pressure regulator is integrated into the filter and works well with modern fuel injected engines such as LS, Hemi, and more.
• Eliminates adapter fittings and includes a mounting bracket with rubber insulator to make installation a breeze.
• Five micron fuel filter is built into the assembly to protect your injectors and ensure a long service life.