Reviews Fuel Tank Pressure

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

  • Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
  • Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
  • Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
  • Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....
Check Stock

17510-ZE2-801ZC Fuel Tank for Honda GX340 GX390 Engine Replaces 17510-ZE3-020ZA 17510ZE3020ZA by TOPEMAI

  • ...ne but is 1/2 liter larger than original.Compatible with Stens 125-568 Rotary 20-11016..
  • GX340 Fuel Tank Replaces Honda: 17510-ZE3-030ZA, 17510-ZE3-020ZA, 17510-ZE3-010ZA, 17510-ZE2-801ZC, 17510-ZE2-800ZC, 17510-ZE2-010ZA, 17510-ZE2-020ZA,17510ZE3020ZA. Fuel Tank For Honda GX270 GX240 GX340 GX390 engine ,water pump, pressure washer, snow blower, compressor and most power equipment with these engines..
  • GX390 Fuel Tank Capacity is 6.5 Liter.Notes:Not compatible with greater than 10% ethanol fuel.
  • Filling the tank more than 3/4 full could cause a potential fuel leak..
  • 420cc Fuel Tank Fits for Harbor Freight Predator 63083 63082 63966 63964 60340 60349 69736 69671 68530 68525 66603 69672 69674 68529 68526 98839 engine. Fits for Champion Generac power equipment with 389cc 420cc 439cc engine Go Kart and other power equipment. Fuel Tank for Honda 420CC AKA Gx390 Fuel Tank, Gx340 Fuel Tank,Fuel Tank Gx390, Gx240 Fuel Tank,Gx270 Fuel Tank, fuel tank for honda gx240..
  • Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort to provide customers with satisfactory service. Feel free contact us by emails if you have any problems..
Check Stock

Surwit Electric Fuel Pump Assembly Compatible with Volvo Penta 4.3L 5.0L 5.7L 5.7OSXI 5.7OSI 5.7GXI 5.0GXI 5.7GI 5.0OSI 4.3GXI 4.3OSI Part# 21608511 21545138

  • This assembly is actually made of two pumps along with a fuel reservoir. The low-pressure pump pulls the fuel from the fuel tank in the boat and deposits it into a small reservoir on the assembly. The high-pressure pump provides fuel to the fuel injection system. The fuel pump assembly reservoir is a small fuel tank mounted on the engine. It fills continually with fuel from the main fuel tank by the low-pressure pump and then is delivered to the engine fuel rail by the high-pressure pump..
  • This Electric Fuel Pump Assembly fits for Volvo Penta 4.3L 5.0L 5.7L for 5.7OSXI 5.7OSI 5.7GXI 5.0GXI 5.7GI 5.0OSI 4.3GXI 4.3OSI. Customers can find the product you need accurately according to the OE number. OEM replace part number: 21545138, 21397771, 3594444, 3861355, 3860210..
  • This assembly can greatly affect the way your motor burns fuel, and subsequently, how much power your engine generates. Once a boat part has failed, it's obviously too late to repair it. For performance of your boating, this fuel pump assembly is one component you can’t ignore..
  • Over time, your fuel pump assembly may wear out and require replacement. Our each product is manufactured to the same specifications as the factory, and constructed with precision machined parts, you can purchase i....
Check Stock

Compressed Air Filter Regulator Combo Water Oil Trap Separator Kit with Gauge for Compressed Air Lines

  • The container cup is made of high quality materials, high temperature resistance and high hardness..
  • The container cup of this pressure regulating filter has good sealing performance..
  • With a pressure gauge, the pressure value can be accurately displayed for easy observation..
  • Pull up the pressure regulating valve to unlock it, and adjust the air pressure independently..
  • It can prevent pollutants from being mixed into the fuel tank with the air due to the fluctuation of the fuel volume of the fuel tank..
Check Stock

NOENOUGH External Fuel Pump 300LPH High Flow 12V 145psi Fuel Injection Pump Replacement 0580254044 Universal Fit for AN10 Inlet / AN6 Outlet

  • ★【COMPATIBLE FUEL: 】Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F.
  • ★【EASY TO INSTALL: 】It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump..
  • ★【PACKAGE INCLUDE: 】1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
  • ★【COMPATIBLE FUEL: 】Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process, which is not easy to fade and has rust proof, scratch proof and waterproof..
Check Stock

Compressed Air Filter Regulator Combo, Excellent Filtering Performance Water Oil Trap Separator Aluminum Alloy High Hardness for Compressed Air Lines

  • The container cup is made of high quality materials, high temperature resistance and high hardness..
  • It can prevent pollutants from being mixed into the fuel tank with the air due to the fluctuation of the fuel volume of the fuel tank..
  • With a pressure gauge, the pressure value can be accurately displayed for easy observation..
  • The container cup of this pressure regulating filter has good sealing performance..
  • Pull up the pressure regulating valve to unlock it, and adjust the air pressure independently..
Check Stock

Carter Universal Electrical Fuel Pump Automotive Replacement 12V (P4600HP)

  • SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
  • TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
  • FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
  • WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
  • INCREASED FUEL EFFICIENCY: Carter electric fuel pump provides accurate fuel needs while adjusting to your vehicle pressure accordingly. Feel safer on the road while receiving your vehicle's maximum power potential..
Check Stock

Carter In-Tank Universal Electric Fuel Pump Automotive Replacement 12V (P4389)

  • SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
  • TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
  • FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
  • WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
  • INCREASED FUEL EFFICIENCY: Carter electric fuel pump provides accurate fuel needs while adjusting to your vehicle pressure accordingly. Feel safer on the road while receiving your vehicle's maximum power potential..
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

ZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)

  • 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
  • 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
  • Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
  • 3: 114 Fuel Pressure Gauge Tool Kit connection.
  • Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
  • 4：This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check Stock

Locking Pre-vent Cap for Auxilary and Transfer tanks

  • THIS ITEM HAS BEEN REPLACeD BY THE NEW AND IMPROVED FSS 754.
  • The Flow Security Systems PRE-VENT Fuel Cap represents the latest in fuel cap technoloy. The FSS 750 pre-vent cap is designed to permit the controlled release of fuel tank pressure from volatile fuels. When removing the cap to refuel a 1/2 turn of the cap releases the fuel tank pressure before the caps sealing gasket is released from the filler neck. This feature dramatically reduces the possibility of fuel expulsion from the filler neck when the cap is removed. The FSS 750 pre-vent security cap is for use on diesel, transfer and auxilary tanks. Allows pumping of fuel at 15 gpm without removal of cap. The FSS 750 pre-vent security cap helps to maintain fuel quality by reducing condensation and evaporation loss..
  • Patented Spinsecure design prevents unauthorized access to fuel, Suitable for use on all tranfer tanks.
  • For use on all 2” female threaded tanks, Tubular lock and key with over 50,000 combinations.
  • Can be keyed alike for multiple use convenience, Has weather proof self-closing latch covering the face of the lock.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

Standard Motor Products 588A Carburetor Kit

  • 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase our This Fuel Tank Pressure Sensor..
  • 【QUALITY & FEATURES】★★Fuel tank sensor housing is made from high quality reinforced plastic, offering superior resistance to the elements. ★★★ a robust design with high grade materials to meet the stringent demands of today's service professional to insure it lasts longer..
  • 【EASY INSTALLATION】★★★All tank pressure sensor are 100% tested using automated equipment, even under the most demanding operating conditions.★simple structure, easy to install, plug and play, very convenient.★★★ Only 15 mins less for installation. solve engine code problem and no engine light on. It was as advertised. Installed and corrected the issue at less than half the dealers cost. check youtube video if you have installation problem.Quick installation (professional help may be required).
  • 【REPLACES PART & MODEL】Commonly found on popular Compatible with Chevy, Buick, Saturn, GMC Cadillac, Oldsmobile, Pontiac, Hummer models including years 1996-2011, and more. See below for detailed mod....
Check Stock