Reviews Fuel Tank Lock

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）.
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock

OSBUN 3D Fuel Tank Gas Cap Cover, Compatible with SUZUKI HAYABUSA GSX1300R 2008-2020

  • ✔ Wide Application: Fuel gas lock cap compatible with 2015-2020 Polaris RZR Ranger Sportsman 570 800 900 1000 XP Turbo S. Compatible with Most Polaris ATVs, Boat, Rangers, and RZRs.
  • Replace OEM Part Number: 5433687, 5435534, 5450389, 5439075. (NOTE : Please check your size before buying).
  • ✔ Good protection against vandals: Sukemichi locking fuel cap tank, Sturdy and easy lockin/unlocking. Unique lock cylinder anti-theft design, a lock has a unique key. Allows you to keep others out of your fuel tank. Note: Please keep your keys.
  • ✔ Good sealing performance: High-quality rubber seal keyhole cover, which can stop dirt, dust, sand, and water from entering the fuel tank. Prevent the lock core from rusting and prolong its service life.
  • ✔ Simple installation: There is no installation, just put it on in place of the original fuel ca.
  • ✔ What You Get: 1 x Polaris ranger accessories gas cap lock, 2 x special key. our worry-free 24-month warranty and friendly customer service..
Check Stock

OTC 6599 Universal Fuel Sender Lock Tool

  • Universal design allows tool to fit fuel tank lock rings on Ford Chrysler and GM vehicles.
  • Tool easily removes and installs lock ring on the fuel tank when servicing the fuel pump or fuel sending unit.
  • Used with a 1/2" drive ratchet or breaker bar.
Check Stock

Atima Generator Accessories – Extended Run Dual Fuel System Extender Kit for Honda Generator

  • [Function]: ATIMA Dual Fuel System Extender Kit can power two generators simultaneously. It is very easy & convenient to use. Just connect the pipes, combo kit gas cap tube and attach them to a Honda Generator or any other compatible generators. The generator then can intake the fuel from the external tank and it can extend the operation time..
  • [Composition]: This kit includes one long fuel pipe with automatic lock.
  • two short fuel pipes connected to the fuel tank cap and two fuel tank caps. The tight fitting of the fuel pipe prevents oil leakage..
  • [Advantage]:1: Run honda generator fuel extender System Each fuel pipe interface is a quick interface, so it is very convenient to connect .2: When using our products, the generator ,fuel tank and leather pipe are directly connected, not twisted, reducing the distortion of the leather tube and increasing the service life..
  • [Thread fit] :The fuel tank cap thread is tightly coupled with the generator thread, and the rubber gasket is squeezed with the generator port to form a seal to prevent air from entering..
  • [Tips]：The users should buy another tank with Thread outlet to connect this system , like attwood 8806LPG2S Epa Certified Portable Fuel Tank.The model number of the generator must match the model of the f....
Check Stock

Beasteel Gasoline Container Lock Mount, Oil Mounting Bracket, Gas Tank Holder for Off-Road Motorcycle SUV ATV Truck Cars Gallon Can Fixing Device 2PCS

  • The fuel tank mounting bracket is well made of Advanced Engineering Plastics and Metals. Can fix the oil drum, help vibration dampening and effectively extending the service life of the fuel tank..
  • Advantage: The fuel tank bracket lock is fit for Beasteel 2 gallon fuel tank, can be detached for storage, saving space. Using these sturdy mounting brackets help fuel tank stay steady. It is mountable in different locations. More convenient and cheaper than the fuel tank bracket shelf..
  • Widely used: Fuel tank with the bracket can be used to hold water, gasoline, diesel, fuel oil, etc., Suitable for all cars, trucks, motorcycles ATV SUV and boats. Store extra gas for emergency, just need to be fixed on the pole frame, will not fall down which provide you with a safe driving environment and help you save space..
  • Convenient to use: With the help of a fixed frame, the fuel tank can be fixed on the back and side of the motorcycle. Can also be fixed on the luggage rack of the car or anywhere with a steel frame. Easy to install and remove. You can install it in different locations according to your needs..
  • Package Include: 2 Fuel Tank Mount Locks. You could buy it at the same time as Beasteel gasoline fuel tank. If it is another brand fuel tank, please confirm ....
Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

  • Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
  • Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
  • Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
  • Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....
Check Stock

1/4 Quarter Turn Aluminum Non Locking Diesel Fuel Cap for 3 Inch Semi Truck Fuel Tank Locking Gas Cap Fit for Freightliner Cascadia Columbia Century Coronado M2 Replace 03-37017-000 S2136

  • Compatible Models: Non locking diesel fuel cap fit for Freightliner Cascadia 108SD Argosy Century Columbia Coronado M2 112 114SD 122SD. Please pull down to view the specific adaptation.
  • Replacement Part Number: Replace 3-37017-000 S21361, 600148, 0337017000, 337017000. The inner diameter of the fuel tank cap is 3.5", the outer diameter of your fuel filler should be 3", Please measure the outer diameter of your fuel tank fill tube prior to ordering.
  • High-quality Material: The fuel gas cap is made of high-quality die-cast aluminum alloy, which is not easy to corrode and oxidize. The fuel tank cap is equipped with a rubber sealing ring, safety chains and rings, which will not leak after installation. Semi-trailer diesel fuel tank only, ventilated, 220°F heat release, longer life.
  • Anti-theft and Anti-leakage: The non locking diesel fuel cover has a high-quality lock cylinder to prevent diesel theft. 8 inch chain and 6.5 inch steel retention wire to prevent loss of fuel cap.
  • Products Include: 1 x fuel tank cap, inside the cap there are rubber seals, safety chains, lifting rings. When installing, please clean the fuel port part, pay attention to cover the fuel tank port to prevent impurities from entering the fuel tank, and then tighten the fuel tank cap....
Check Stock

WISPAUSU 6599 Fuel Tank Lock Ring Wrench Tool Compatible with Ford Chrysler Dodge GM Vehicles Universal Fuel Pump Lock-ring Removal Tool Fuel Sender Tank Lid Remover

  • Suitable for Ford Chrysler and GM vehicles' fuel tank lock rings. Please check the ring size before purchase..
  • The 6599 fuel tank lock ring wrench tool can help you change your fuel sender, remove the ring effectively without damage. To repair your fuel....
  • Compatible with 2004-newer Ford F-150 trucks, 2004-newer Chrysler/Dodge mini-vans PT Cruiser Dakota Durango, 2004-newer Chevy 1/2-ton 3/4-ton trucks,....
  • The fuel pump lock ring removal tool should use with your 1/2" drive ratchet or breaker bar. Take off or install the lock ring easily. The year of....
  • Born for heavy duty jobs and made of high-carbon steel. We offer 1 year after-sales service. Your order will get fast delivery by FBA..
Check Stock

Dorman 579-053 Fuel Tank Sending Unit Lock Ring Compatible with Select Models

  • Direct replacement - this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications.
  • Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Vortex GC610K V3 Black Gas Cap for Yamaha Motorcycles

  • Coarse thread enables quick closure without cross-threading and large contoured finger tabs allow for easier opening compared to classic Vortex design.
  • Safety lock switch prevents accidental cap loosening due to vibration or contact and integrated dual check valve assembly eliminates fuel tank pressure issues.
  • Vent and chamber design helps stop leaks by containing any fuel that gets past the check valve.
  • Up to 55 percent lighter than stock keyed fuel tank caps.
  • Customize to match your bike with interchangeable colored safety lock switches.
Check Stock

Duesenberg Shirt Duesenberg Motors Company Mens Black Cotton Tshirt (Large)

  • Coarse thread enables quick closure without cross-threading and large contoured finger tabs allow for easier opening compared to classic Vortex design.
  • Safety lock switch prevents accidental cap loosening due to vibration or contact and integrated dual check valve assembly eliminates fuel tank pressure issues.
  • Vent and chamber design helps stop leaks by containing any fuel that gets past the check valve.
  • Up to 55 percent lighter than stock keyed fuel tank caps.
  • Customize to match your bike with interchangeable colored safety lock switches.
Check Stock

Locking Pre-vent Cap for Auxilary and Transfer tanks

  • THIS ITEM HAS BEEN REPLACeD BY THE NEW AND IMPROVED FSS 754.
  • The Flow Security Systems PRE-VENT Fuel Cap represents the latest in fuel cap technoloy. The FSS 750 pre-vent cap is designed to permit the controlled release of fuel tank pressure from volatile fuels. When removing the cap to refuel a 1/2 turn of the cap releases the fuel tank pressure before the caps sealing gasket is released from the filler neck. This feature dramatically reduces the possibility of fuel expulsion from the filler neck when the cap is removed. The FSS 750 pre-vent security cap is for use on diesel, transfer and auxilary tanks. Allows pumping of fuel at 15 gpm without removal of cap. The FSS 750 pre-vent security cap helps to maintain fuel quality by reducing condensation and evaporation loss..
  • Patented Spinsecure design prevents unauthorized access to fuel, Suitable for use on all tranfer tanks.
  • For use on all 2” female threaded tanks, Tubular lock and key with over 50,000 combinations.
  • Can be keyed alike for multiple use convenience, Has weather proof self-closing latch covering the face of the lock.
Check Stock

Fuel Pump Removal Tool, Fuel Pump Module Spanner Wrench 3/8' to 1/2' Universal Fuel Pump Lock Ring Tool, Adjustable Fuel Pump Lid Tank Cover Wrench

  • MADE OF HIGHT QUALITY STEEL:Fuel tank cover spanner adopts high quality steel forging, overall high temperature quenching treatment, high hardness, wear resistance, long life, easy to use..
  • APPLICATION: Fuel pump cover spanner is used for vehicle removal and installation of fuel pump retaining rings that attach the fuel pump module to the fuel tank. Fuel pump module spanner wrench fits most plastic retaining rings. Compatible with vehicles equipped with silent fuel tank lids..
  • GENERAL MODELS: Suitable for Mercedes-benz, for BMW,for Audi,for Volkswagen,for Toyota,for Honda,for Nissan,for Citroen and other vehicles with plastic fuel pump lock ring..
  • ADJUSTABLE: The fuel pump lid tank cover wrench fits different fuel tank lids and can be adjusted from 3/8" to 1/2" (38mm to 168mm) ratchet drive..
  • DESIGN FEATURES: The curved foot design is more suitable for the installation surface of the oil pump cover to ensure that it is not easy to slip off during operation. The four sides are rounded, and the two hands are respectively held at both ends of the beam to twist the remover, so that it is not easy to hurt the hands when operating with both hands..
Check Stock