240-33 ohms 4' (100mm) Fuel Tank Sending Unit for Marine Boat Truck Car Fuel Sending Unit Marine Fuel Gauge Sending Unit Truck Gas Tank Fuel Sender Fuel Water Level Sensor
- Superior Performance: Our fuel tank sending unit fit 4.25-5" fuel tank has an advantage over thick film swim arm level sensors in the durability and reliability of a reed switch, no part damage, and no tank adjustments required.
- Durable Material: The fuel sending unit is made of heavy duty 316 stainless steel, which is reliable and durable, anti-vibration, explosion-proof, can read data accurately, and can maintain excellent performance in various environments.
- Wide Range of Application: The fuel gauge sending unit is widely used in boat, truck, bus and marine fields, and can support marine and automotive fuel level gauges and water level gauges.
- Simple Installation: The package comes with mounting screws, washers, just remove the old gas tank fuel sender and install the new one, the water level sensor is a standard SAE 5 hole mounting pattern, and the installation takes about 15 minutes in total, you can let the fuel gauge work again, the red wire is positive and the blue wire is negative.
- Please Note: In order to keep the fuel water level sensor from touching the bottom of the tank, if the tank is made of metal, the length of the sensor should be 0.5 inch less than the depth of the tank. If the tank is made of plastic, the length of the sensor should b....
Check StockOTC 3674 Diesel Fuel Pressure Tester
- OTC's Diesel Fuel Pressure Tester features simple one wire connectivity to the fuel pressure sensor signal wire.
- Designed for diesel engines that have a fuel pressure sensor reading used by vehicle computer.
- readings alternate between current and maximum pressure.
- Molded plastic storage case keeps the tool protected when not in use.
Check StockOxygen Sensor o2 Sensor Upstream Air Fuel Ratio Oxygen Sensor for Nissan Altima 2013-2017 2.5L 3.5L NO# 226933TY0A 22693-3TY0B
- OEM NO.:22693-3TY0A,22693-3TY0B Upstream Air Fuel Ratio Oxygen Sensor For Nissan Altima 2013-2017 2.5L 3.5L NO# 226933TY0A 22693-3TY0B.
- reduce harmful emissions, increase fuel economy, Automotive oxygen sensor improve engine performance and prevent premature failure of the catalytic....
- Oxygen Sensor Detect oxygen content in the exhaust gases to optimize emissions and fuel economy，Improve fuel efficiency , Stable performance ,....
- Feature：100% Brand New High Quality Aftermarket Oxygen Sensor.Meet the professional specification as OEM standard with Laser weld and sealing system....
- Please check your car information with number before purchase. It is will fit for your vehicle when the plug and the length is the same as your....
Check StockGlowShift 8mm 5/16 Fuel Line Fuel Pressure Sensor T-Fitting Adapter Compatible with Subaru Impreza WRX STI 2002-2014
- GlowShift 8mm Fuel Line Fuel Pressure T-Fitting Adapter Allows Users to Install a Fuel Pressure Sensor to the Fuel Line.
- Compatible with 2002-2014 Subaru Impreza WRX STI.
- Features 8mm (5/16") Barbed Fittings, 1/8-27 NPT Female Thread Port for Fuel Pressure Gauge Sensor & 2 Hose Clamps to Secure Fuel Line to T-Fitting.
- Includes Step-By-Step Installation Instructions.
- GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check StockAir Fuel Ratio Sensor Upstream for N|is|sa|n Altima 22693-3TY0B 22693-VZ90A
- Front Upstream O2 Oxygen Sensor for Nissan Altima 2.5L 2013-2017 Repair Accessories 234-9133 22693-3TY0A 22693-3TY0B 2349133.
- reduce harmful emissions, increase fuel economy, Automotive oxygen sensor improve engine performance and prevent premature failure of the catalytic....
- Oxygen Sensor Detect oxygen content in the exhaust gases to optimize emissions and fuel economy，Improve fuel efficiency , Stable performance ,....
- Feature：100% Brand New High Quality Aftermarket Oxygen Sensor.Meet the professional specification as OEM standard with Laser weld and sealing system....
- Please check your car information with number before purchase. It is will fit for your vehicle when the plug and the length is the same as your....
Check Stock
Motorcraft DPFE6 Exhaust Gas Recirculation Pressure Feedback Sensor
- [Fitment] - 7.3 IPR valve + ICP control sensor fit for Ford E-350 Club Wagon 03, fit for Ford F-250 F-350 F-450 Super Duty 99-03, fit for Ford F-750 99-03, for Ford F-250 Super Duty 01-03, fit for Ford E-350 Econoline Club Wagon 97-02, fit for Ford E-550 Econoline Club Wagon 02, fit for Ford E-450 Econoline Super Duty Stripped 01, fit for Ford Excursion.for 01 Ford F-650 00-01, fit for Ford E-450 Econoline Super Duty 00, fit for Ford F-250 F-350 97 - 7.3L Powerstroke ONLY.
- [Part Number] - 7.3 IPR fuel injection pressure regulator valve replace F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
- [Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
- [Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment and perfect replacement, meets or exceeds OEM standards. We offer 2 years service, any questions about the product, pls contact us in ....
Check Stock
A-Premium Electric Fuel Pump Module Assembly with Pressure Sensor Compatible with Cadillac Escalade 2015-2019 & Chevrolet Tahoe 2015-2019 & GMC Yukon 2015-2019, Replace# 13513342, 13582493
- Electric Fuel Pump for 2014-2015 Kia Soul.
- Notes:It's coming with Sending Unit and Float..
- FUNCTIONS - Suck the fuel from the fuel tank, pressurize it and then deliver it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure. Guaranteed supply of continuous fuel to the injector.
- Fuel Pump Assembly DOES NOT come with pressure sensor, the original black pressure sensor on the top of the assembly must be reused at time of installation.
- Fuel Pumps are low noise pump, better driving comfort, balancing cost and reliability to meet different needs.
- IMPORTANT NOTE - Please make sure to match the exact part numbers between this part and the part that you are replacing. Contact your mechanics, or send us a message to make sure it matches exactly in case of doubt before purchasing.
Check StockDWVO Fuel Pump with Pressure & Level Sensor Compatible with 04-06 Altima 2.5L/3.5L 04-09 Quest 3.5L 04-08 Maxima 3.5L Easy Assembly Enhanced Turbo Pump
- Direct fit: precisely built and tested to the same rigorous quality standards as OE fuel pumps, DWVO fuel pump is a direct replacement for your....
- Fast engine start: the enhanced 4th generation turbo pump accelerates fuel atomizing, reduces fuel pump noise, and ensures stronger power with less....
- High stability & durability: adopting the precision injection molding technology, our high-grade plastic makes the fuel pump more stable and corrosion....
- Accurate sensor: the pressure sensor & dual fuel lines are included to keep a good balance between the fuel tank and engine fuel rail, and high....
- Easy assembly: Only takes a few minutes to install the sealing ring and swing arm to complete.
- the provided online installation manual and user manual....
Check StockOxygen Sensor o2 Sensor for Nissan Altima 2.5L 2013-2017 Repair Accessories 234-9133 22693-3TY0A 22693-3TY0B 2349133
- To reduce harmful emissions and improve fuel economy, automotive oxygen sensors improve engine performance and prevent premature catalytic converter....
- The oxygen sensor detects the oxygen content in the exhaust gas to optimize emissions and fuel economy, improve fuel efficiency, stable performance,....
- Features: 100% brand new high-quality after-sales oxygen sensor. Meet the professional specifications of OEM standards, with laser welding and sealing....
- Please check your car information and serial number before buying. When the plug and length are the same as your original sensor, it will fit your....
Check Stock
WATERWICH Air/Fuel Ratio AFR Gauge Kit 2inches 52mm 12V Universal for Car SUV Vehicle Automotive
- 1.Easily display at night:Our gauge is highly visible with a WHITE Light,easy viewing at all angles during any lighting conditions,2-1/16" (52mm) Diameter with Black Dial, Illuminated Red Needle & black face gauge..
- 2.WATERWICH Air/Fuel Ratio Gauge Reads Vehicle's Air to Fuel Mixture from 10 to 20 AFR - AFR Quality & Values | Rich: 18 ~ 20 AFR | Optimal: 12 ~ 18 AFR | Lean: 10 ~ 12 AFR..
- 3.Easy installation:Our gauge includes electric wire with necessary mounting and installation hardware,no need other sensor, your existing oxygen sensor can fit it well..
- 4.Air/Fuel Ratio Gauge Monitoring car's air/fuel ratio lean-optimal-rich(from 10.0 to 20.0),so you can change air to fuel ratio to maximized power and engine performance, reduced emissions, and higher fuel economy..
- 5.DC8V and 18V compatible, Wide Compatibility: Universal for Car,SUV,Vehicle Automotive etc. Displays Lean, Rich, and Optimal Air/Fuel Mixtures,All gauges are brand new, complete in box..
Check Stock
Standard Motor Products 588A Carburetor Kit
- 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase our This Fuel Tank Pressure Sensor..
- 【QUALITY & FEATURES】★★Fuel tank sensor housing is made from high quality reinforced plastic, offering superior resistance to the elements. ★★★ a robust design with high grade materials to meet the stringent demands of today's service professional to insure it lasts longer..
- 【EASY INSTALLATION】★★★All tank pressure sensor are 100% tested using automated equipment, even under the most demanding operating conditions.★simple structure, easy to install, plug and play, very convenient.★★★ Only 15 mins less for installation. solve engine code problem and no engine light on. It was as advertised. Installed and corrected the issue at less than half the dealers cost. check youtube video if you have installation problem.Quick installation (professional help may be required).
- 【REPLACES PART & MODEL】Commonly found on popular Compatible with Chevy, Buick, Saturn, GMC Cadillac, Oldsmobile, Pontiac, Hummer models including years 1996-2011, and more. See below for detailed mod....
Check StockDelphi FG1371 Fuel Module
- Delphi fuel modules and pumps are designed to deliver an immediate, uninterrupted flow of fuel to the engine's fuel rail and injectors at the specified system pressure, resulting in more efficient operation.
- Where required, fuel assemblies include integrated fuel level sensing components that deliver an accurate reading of the fuel level in the tank to the fuel gauge.
- Delphi fuel pump assemblies are built with OE-validated parts and include OEM-grade wiring, electrical connectors and level sensor assemblies that deliver increased performance, durability and reliability over other aftermarket fuel pumps.
Check StockGlowShift 1/2” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter - 1/8-27 NPT Sensor Port - 304 Stainless Steel - Fits Hose with 12.7mm ID Inner Diameter - Includes Clamps
- GlowShift 1/2” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter Allows Users to Install a Fuel Pressure Sensor to a 1/2" Inner Diameter Fuel Line.
- Features 1/2" (12.7mm I.D) Barbed Push Lock Fittings, 1/8-27 NPT Port for Fuel Pressure Gauge Sensor & 2 Hose Clamps.
- Manufactured from 304 Stainless Steel that Prevents Corrosion.
- Includes Step-By-Step Installation Instructions.
- GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock
